Consegui corrigir isso alterando bridge em VMWare Network Manager
Após a reinicialização, a rede de repente parou de funcionar e não consigo me conectar à Internet.
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0c:29:c9:1a:f3
inet6 addr: fe80::20c:29ff:fec9:1af3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6630 (6.6 KB) TX bytes:11913 (11.9 KB)
Interrupt:19 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:284 errors:0 dropped:0 overruns:0 frame:0
TX packets:284 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:43332 (43.3 KB) TX bytes:43332 (43.3 KB)
Estou recebendo alguns erros estranhos: Interrupt:19 Base address:0x2000 , mas não tenho certeza do que isso significa.
cat / procinterrupts
CPU0
0: 25 IO-APIC-edge timer
1: 90 IO-APIC-edge i8042
3: 1 IO-APIC-edge
4: 79 IO-APIC-edge
6: 2 IO-APIC-edge floppy
8: 1 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 2692 IO-APIC-edge i8042
14: 0 IO-APIC-edge ata_piix
15: 0 IO-APIC-edge ata_piix
16: 2034 IO-APIC 16-fasteoi vmwgfx, snd_ens1371
17: 11702 IO-APIC 17-fasteoi ehci_hcd:usb1, ioc0
18: 62 IO-APIC 18-fasteoi uhci_hcd:usb2
19: 156 IO-APIC 19-fasteoi eth0
24: 0 PCI-MSI-edge PCIe PME, pciehp
25: 0 PCI-MSI-edge PCIe PME, pciehp
26: 0 PCI-MSI-edge PCIe PME, pciehp
27: 0 PCI-MSI-edge PCIe PME, pciehp
28: 0 PCI-MSI-edge PCIe PME, pciehp
29: 0 PCI-MSI-edge PCIe PME, pciehp
30: 0 PCI-MSI-edge PCIe PME, pciehp
31: 0 PCI-MSI-edge PCIe PME, pciehp
32: 0 PCI-MSI-edge PCIe PME, pciehp
33: 0 PCI-MSI-edge PCIe PME, pciehp
34: 0 PCI-MSI-edge PCIe PME, pciehp
35: 0 PCI-MSI-edge PCIe PME, pciehp
36: 0 PCI-MSI-edge PCIe PME, pciehp
37: 0 PCI-MSI-edge PCIe PME, pciehp
38: 0 PCI-MSI-edge PCIe PME, pciehp
39: 0 PCI-MSI-edge PCIe PME, pciehp
40: 0 PCI-MSI-edge PCIe PME, pciehp
41: 0 PCI-MSI-edge PCIe PME, pciehp
42: 0 PCI-MSI-edge PCIe PME, pciehp
43: 0 PCI-MSI-edge PCIe PME, pciehp
44: 0 PCI-MSI-edge PCIe PME, pciehp
45: 0 PCI-MSI-edge PCIe PME, pciehp
46: 0 PCI-MSI-edge PCIe PME, pciehp
47: 0 PCI-MSI-edge PCIe PME, pciehp
48: 0 PCI-MSI-edge PCIe PME, pciehp
49: 0 PCI-MSI-edge PCIe PME, pciehp
50: 0 PCI-MSI-edge PCIe PME, pciehp
51: 0 PCI-MSI-edge PCIe PME, pciehp
52: 0 PCI-MSI-edge PCIe PME, pciehp
53: 0 PCI-MSI-edge PCIe PME, pciehp
54: 0 PCI-MSI-edge PCIe PME, pciehp
55: 0 PCI-MSI-edge PCIe PME, pciehp
56: 160 PCI-MSI-edge 0000:02:05.0
57: 76 PCI-MSI-edge vmw_vmci
58: 0 PCI-MSI-edge vmw_vmci
NMI: 0 Non-maskable interrupts
LOC: 23109 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RTR: 0 APIC ICR read retries
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
HYP: 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
Consegui corrigir isso alterando bridge em VMWare Network Manager
Tags vmware-player linux ubuntu