O Network Manager está se conectando à mesma rede, mas continua criando diferentes "perfis" como thomson, thomson1, thomson 2.
Como posso corrigir isso, para que ele sempre seja exibido e se conecte à mesma rede com o mesmo nome?
Saída de lspci -nn :
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter [10ec:8723]
Saída de nm-tool :
NetworkManager Tool
State: connected (global)
- Device: wlan0 [INFINITUM440C] -----------------------------------------------
Type: 802.11 WiFi
Driver: rtl8723ae
State: connected
Default: yes
HW Address: C0:D9:62:47:E1:AD
Capabilities:
Speed: 72 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
INFINITUM4813: Infra, 10:47:80:15:B6:51, Freq 2462 MHz, Rate 54 Mb/s, Strength 30 WPA WPA2
*INFINITUM440C: Infra, E0:24:7F:38:06:4D, Freq 2462 MHz, Rate 54 Mb/s, Strength 83 WPA WPA2
corpen: Infra, 00:60:B3:44:F5:D3, Freq 2422 MHz, Rate 54 Mb/s, Strength 18 WEP
INFINITUMCA0C: Infra, E0:24:7F:37:F8:D3, Freq 2462 MHz, Rate 54 Mb/s, Strength 40 WPA WPA2
INFINITUM4D0D: Infra, 00:46:4B:C9:2B:56, Freq 2412 MHz, Rate 54 Mb/s, Strength 26 WPA WPA2
INFINITUMC413: Infra, 10:47:80:15:9E:CD, Freq 2437 MHz, Rate 54 Mb/s, Strength 27 WPA WPA2
FaciNet15: Infra, 00:15:6D:67:39:10, Freq 2427 MHz, Rate 11 Mb/s, Strength 100
IPv4 Settings:
Address: 192.168.1.50
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.254
DNS: 8.8.8.8
DNS: 8.8.4.4
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: alx
State: unavailable
Default: no
HW Address: 00:8C:FA:40:7E:4A
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
Se você tiver o DHCP configurado no roteador, o dispositivo pode estar recebendo um novo endereço IP sempre que você se conectar, exigindo um novo login. Eu tentaria acessar as configurações dos roteadores, configurar um endereço IP estático para o seu roteador. computador, redefina seu computador e, em seguida, reconecte-se e veja o que ele faz. Se fizer a mesma coisa, pode haver um problema de software com o sistema operacional, se não, então pode ser um problema com sua configuração de rede.
Tags networking wireless