SSH anula com demasiadas falhas de autenticação

Question

Estou tentando executar este script de provisionamento simples, mas estou encontrando erros ao executar vagrant up e, em seguida, vagrant provision de comandos.

Eu li que precisava criar um arquivo /etc/ansible/hosts que fiz, preenchendo-o com:

[vagrant]
192.168.222.111

Minha configuração do SSH (alguns detalhes foram removidos):

Host default
HostName 127.0.0.1
User vagrant
Port 2222
UserKnownHostsFile /dev/null
StrictHostKeyChecking no
PasswordAuthentication no
IdentityFile /Users/ashleyconnor/.vagrant.d/insecure_private_key
IdentitiesOnly yes
LogLevel FATAL

Host            server
HostName        XXX.XXX.XXX.XXX
User            ash
PreferredAuthentications publickey
IdentityFile    ~/.ssh/ash_ovh

Host            deployer
HostName        XXX.XXX.XXX.XXX
User            deployer
PreferredAuthentications publickey
IdentityFile    ~/.ssh/deployer_ovh

Host            bitbucket.org
PreferredAuthentications publickey
IdentityFile    ~/.ssh/bitbucket

Host            github.com
PreferredAuthentications publickey
IdentityFile    ~/.ssh/github

Host            staging
HostName        192.168.56.10
User            deployer
PreferredAuthentications publickey
IdentityFile    ~/.ssh/id_rsa

A saída SSH que estou recebendo parece gerar todas as minhas chaves:

<192.168.222.111> ESTABLISH CONNECTION FOR USER: vagrant
<192.168.222.111> REMOTE_MODULE setup
<192.168.222.111> EXEC ['ssh', '-C', '-tt', '-vvv', '-o', 'ControlMaster=auto', '-o', 'ControlPersist=60s', '-o', 'ControlPath=/Users/ashleyconnor/.ansible/cp/ansible-ssh-%h-%p-%r', '-o', 'IdentityFile=/Users/ashleyconnor/.vagrant.d/insecure_private_key', '-o', 'KbdInteractiveAuthentication=no', '-o', 'PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey', '-o', 'PasswordAuthentication=no', '-o', 'User=vagrant', '-o', 'ConnectTimeout=10', '192.168.222.111', "/bin/sh -c 'mkdir -p $HOME/.ansible/tmp/ansible-tmp-1394317116.44-226619545527061 && chmod a+rx $HOME/.ansible/tmp/ansible-tmp-1394317116.44-226619545527061 && echo $HOME/.ansible/tmp/ansible-tmp-1394317116.44-226619545527061'"]
fatal: [192.168.222.111] => SSH encountered an unknown error. The output was:
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /Users/ashleyconnor/.ssh/config
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 53: Applying options for *
debug1: auto-mux: Trying existing master
debug1: Control socket "/Users/ashleyconnor/.ansible/cp/ansible-ssh-192.168.222.111-22-vagrant" does not exist
debug2: ssh_connect: needpriv 0
debug1: Connecting to 192.168.222.111 [192.168.222.111] port 22.
debug2: fd 3 setting O_NONBLOCK
debug1: fd 3 clearing O_NONBLOCK
debug1: Connection established.
debug3: timeout: 10000 ms remain after connect
debug3: Incorrect RSA1 identifier
debug3: Could not load "/Users/ashleyconnor/.vagrant.d/insecure_private_key" as a RSA1 public key
debug1: identity file /Users/ashleyconnor/.vagrant.d/insecure_private_key type -1
debug1: identity file /Users/ashleyconnor/.vagrant.d/insecure_private_key-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1
debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH_5*
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "192.168.222.111" from file "/Users/ashleyconnor/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /Users/ashleyconnor/.ssh/known_hosts:20
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-sha1,[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],zlib,none
debug2: kex_parse_kexinit: [email protected],zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 [email protected]
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 [email protected]
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 119/256
debug2: bits set: 527/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 50:db:75:ba:11:2f:43:c9:ab:14:40:6d:7f:a1:ee:e3
debug3: load_hostkeys: loading entries for host "192.168.222.111" from file "/Users/ashleyconnor/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /Users/ashleyconnor/.ssh/known_hosts:20
debug3: load_hostkeys: loaded 1 keys
debug1: Host '192.168.222.111' is known and matches the RSA host key.
debug1: Found key in /Users/ashleyconnor/.ssh/known_hosts:20
debug2: bits set: 511/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /Users/ashleyconnor/.ssh/id_rsa (0x7fc212600540),
debug2: key: /Users/ashleyconnor/.ssh/bitbucket (0x7fc212600730),
debug2: key: /Users/ashleyconnor/.ssh/deployer (0x7fc212600a00),
debug2: key: /Users/ashleyconnor/.ssh/github (0x7fc212600c80),
debug2: key: /Users/ashleyconnor/.ssh/ash_ovh (0x7fc212601010),
debug2: key: /Users/ashleyconnor/.ssh/deployer_ovh (0x7fc2126011e0),
debug2: key: /Users/ashleyconnor/.vagrant.d/insecure_private_key (0x0), explicit
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-with-mic,gssapi-keyex,hostbased,publickey
debug3: authmethod_lookup publickey
debug3: remaining preferred: ,gssapi-keyex,hostbased,publickey
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /Users/ashleyconnor/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Offering RSA public key: /Users/ashleyconnor/.ssh/bitbucket
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Offering RSA public key: /Users/ashleyconnor/.ssh/deployer
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Offering RSA public key: /Users/ashleyconnor/.ssh/github
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Offering RSA public key: /Users/ashleyconnor/.ssh/ash_ovh
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Offering RSA public key: /Users/ashleyconnor/.ssh/deployer_ovh
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
Received disconnect from 192.168.222.111: 2: Too many authentication failures for vagrant

O comando vagrant ssh funciona bem.

    

Answer 1

De acordo com ssh-config(5) , o ssh sempre tentará todas chaves conhecidas pelo agente, além de quaisquer arquivos de identidade:

 IdentitiesOnly
         Specifies that ssh(1) should only use the authentication identity files
         configured in the ssh_config files, even if ssh-agent(1) offers more
         identities.  The argument to this keyword must be “yes” or “no”.  This
         option is intended for situations where ssh-agent offers many different
         identities.  The default is “no”.

 IdentityFile
         Specifies a file from which the user's DSA, ECDSA or DSA authentication
         identity is read.  The default is ~/.ssh/identity for protocol version 1,
         and ~/.ssh/id_dsa, ~/.ssh/id_ecdsa and ~/.ssh/id_rsa for protocol
         version 2.  Additionally, any identities represented by the  
         authentication agent will be used for authentication.  ssh(1) will try
         to load certificate information from the filename obtained by
         appending -cert.pub to the path of a specified IdentityFile.

Para evitar isso, é preciso especificar IdentitiesOnly=yes além da chave privada explicitamente fornecida.

Por exemplo, executando o comando ssh abaixo:

$ ssh -i /home/henk/.vagrant.d/insecure_private_key \
  [email protected] echo ok

produz:

Received disconnect from 192.168.222.111: 2: Too many authentication 
failures for vagrant

No entanto, executando o mesmo comando ssh e, além disso, especificando IdentitiesOnly=yes :

$ ssh -o IdentitiesOnly=yes \
  -i /home/henk/.vagrant.d/insecure_private_key [email protected] echo ok

produz:

ok

    

Answer 2

Então, eu tinha 5 chaves no meu ssh-agent e, apesar da opção explícita de usar a chave ssh do vagrant, ele ainda insistia em fazer o loop pelas chaves no meu agente antes de chegar ao max_tries convenientemente antes de chegar à chave certa.

Para verificar se você tem esse problema: Execute ssh-add -l - se essa lista for > 5 você precisa remover chaves ou desabilitar o agente.

Para corrigir: Execute ssh-add -d ~/.ssh/X , em que X é a chave que você deseja remover.

    

Answer 3

Depois que eu tentei tudo aconselha aqui sem sucesso, eu reconheci que meu problema era o novo método de autenticação (GSSAPI), que sempre foi malsucedido.

Eu resolvi isso editando ~/.ssh/config file:

Host *
  GSSAPIAuthentication no

Espero que isso ajude alguém também.

    

Answer 4

Seu ssh-agent possui mais chaves do que o servidor ssh permite tentativas de autenticação ("MaxAuthTries", padrão: 6).

Note que alguns agentes ssh, em particular o Keyring do GNOME, carregam automaticamente todas as chaves encontradas em ~ / .ssh, e que estas chaves não podem ser descarregadas com "ssh-add - [dD]".

Aqui estão algumas soluções:

• Você já configurou a chave correta em seu ~ / .ssh / config, então você não precisa do agente. Faça o cliente ignorar o agente, por exemplo unset SSH_AUTH_SOCK ou use "IdentitiesOnly = yes" como sugerido pelo @ henk-langeveld
• Mova algumas teclas de ~ / .ssh (um subdir como ~ / .ssh / noauto também funciona) para evitar que elas sejam carregadas automaticamente. Você ainda pode adicioná-los manualmente, se precisar deles.
• Aumente "MaxAuthTries" no lado do servidor, o número de tentativas de autenticação permitidas

Answer 5

Para evitar isso, podemos usar ssh usando -o 'IdentitiesOnly yes' , por exemplo, ssh -i privateKey -o 'IdentitiesOnly yes' user@host

como alternativa, podemos adicionar as seguintes linhas ao arquivo ~ / .ssh / config

Host *
IdentitiesOnly yes

    

Answer 6

Para conectar o servidor usando o comando quick fix:

ssh -o IdentitiesOnly=yes -i ~/.ssh/private_key_or_pem_file_name server_user_name@ip_OR_hostname echo ok

A forma recomendada é mencionada abaixo:

Mas se você tiver capistrano receipes ou outros softwares que estão conectando seu servidor ssh, então você tem que corrigir da maneira correta, como mencionado abaixo:

No arquivo ~ / .ssh / config , mencione a opção "IdentitiesOnly yes" na configuração do seu servidor

Host server_domain_OR_ip server_name_your_choice
    User server_user_name
    Hostname server_domain_OR_ip
    RSAAuthentication yes
    Compression yes
    IdentityFile ~/.ssh/private_key_OR_pem_file
    IdentitiesOnly yes
    Port 22

private_key_OR_pem_file: No caso de extensão de menção do arquivo pem também ".pem"

    

Answer 7

A mensagem principal é

Received disconnect from 192.168.222.111: 2: 
    Too many authentication failures for vagrant

Você copiou a saída do ssh-config do vagrant como host padrão para .ssh/config , mas isso é ignorado porque possui parâmetros conflitantes (hostname, port). Com nenhuma entrada correspondente, o ssh tentará todas as chaves que encontrar.

Teste a tentativa ssh novamente com a opção -i

$ ssh -i $HOME/.vagrant.d/insecure_private_key [email protected] echo ok

Acredito que é assim que você especifica isso no Inventário Ansível:

[vagrant]
192.168.222.111 ansible_ssh_private_key_file=/.../.vagrant.d/insecure_private_key

Abreviamos o caminho para a legibilidade

Resposta original:

Compare a saída de vagrant ssh-config com a entrada vagrant em seu .ssh/config . Certifique-se de que o caminho da chave privada seja uma correspondência exata.

Verifique também se o arquivo de chaves não pode ser acessado por nenhuma outra conta. Nós todos sabemos o que é essa chave, mas o SSH não sabe que isso é de conhecimento público e tenta nos proteger de usar chaves que podem estar comprometidas.

    

Answer 8

Eu tive esse mesmo erro ao tentar executar um playbook ansible. Acabei fornecendo a opção sys IdentitiesOnly usando --ssh-extra-args :

ansible-playbook -i ../.vagrant/provisioners/ansible/inventory/vagrant_ansible_inventory playbook.yml --ssh-extra-args="-o IdentitiesOnly=yes"