Desde que conectar o disco rígido não fez automaticamente uma janela aparecer, decidi montar manualmente o disco rígido no Utilitário de Disco. Isso me dá isso:
Error mounting: mount exited with exit code 1: helper failed with:
mount: according to mtab, /dev/sdb1 is already mounted on /
mount failed
Isso pode ter sido causado por deixar o disco rígido conectado ao desligar?
/etc/mtab
:
/dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0
proc /proc proc rw,noexec,nosuid,nodev 0 0
none /sys sysfs rw,noexec,nosuid,nodev 0 0
fusectl /sys/fs/fuse/connections fusectl rw 0 0
none /sys/kernel/debug debugfs rw 0 0
none /sys/kernel/security securityfs rw 0 0
none /dev devtmpfs rw,mode=0755 0 0
none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0
none /dev/shm tmpfs rw,nosuid,nodev 0 0
none /var/run tmpfs rw,nosuid,mode=0755 0 0
none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0
none /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0
gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0
/etc/fstab
:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0