Como verificar o valor atual da profundidade da fila?

Question

Eu tenho um servidor OEL conectado via fibra a uma SAN da NetApp. Como posso ver a profundidade da fila conforme o sistema operacional a vê?

Saída de lspci :

05:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
05:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
08:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
08:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)

Saída de lsmod :

qla2xxx              1262209  352
scsi_transport_fc      83145  1 qla2xxx
scsi_mod              199641  15 be2iscsi,ib_iser,iscsi_tcp,bnx2i,libcxgbi,libiscsi2,scsi_transport_iscsi2,scsi_dh,sr_mod,sg,qla2xxx,scsi_transport_fc,libata,cciss,sd_mod

ls /sys/class/fc_host/host*

/sys/class/fc_host/host3:
device       issue_lip  port_id    port_state  speed       subsystem          supported_speeds  system_hostname  uevent
fabric_name  node_name  port_name  port_type   statistics  supported_classes  symbolic_name     tgtid_bind_type

/sys/class/fc_host/host4:
device       issue_lip  port_id    port_state  speed       subsystem          supported_speeds  system_hostname  uevent
fabric_name  node_name  port_name  port_type   statistics  supported_classes  symbolic_name     tgtid_bind_type

/sys/class/fc_host/host5:
device       issue_lip  port_id    port_state  speed       subsystem          supported_speeds  system_hostname  uevent
fabric_name  node_name  port_name  port_type   statistics  supported_classes  symbolic_name     tgtid_bind_type

/sys/class/fc_host/host6:
device       issue_lip  port_id    port_state  speed       subsystem          supported_speeds  system_hostname  uevent
fabric_name  node_name  port_name  port_type   statistics  supported_classes  symbolic_name     tgtid_bind_type

    

Answer 1

No meu para NETAPP:

ls /proc/scsi/qla2xxx
1
ls /proc/scsi/qla2xxx/1 | grep -i -A1 -B1 "queue depth"
Total number of interrupts = 30686605
    Device queue depth = 0x20
Number of free request entries = 1842

Então x20 é 32 em decimal Este é o # que você está procurando. Você pode ler sobre o cálculo para o NETAPP aqui:

link

EDITAR: algum outro método para ver: cat /sys/module/qla2xxx/parameters/ql2xmaxqdepth

    

Answer 2

A maneira mais simples é

cat /sys/block/<sdX>/device/queue_depth