Eu tenho um Dell PowerEdge 2950 executando o Solaris 10 com 8 unidades. Eu quero trocar algumas das unidades por novas. Minha questão a partir de agora é que eu só vejo metade deles e não parece haver nenhum sinal dos outros 4.
informações do servidor -
# cat /etc/release
Solaris 10 5/09 s10x_u7wos_08 X86
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
output do cfgadm -
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c0::dsk/c0t2d0 disk connected configured unknown
c0::dsk/c0t3d0 disk connected configured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb1/1 unknown empty unconfigured ok
usb1/2 unknown empty unconfigured ok
usb2/1 unknown empty unconfigured ok
usb2/2 unknown empty unconfigured ok
usb3/1 unknown empty unconfigured ok
usb3/2 unknown empty unconfigured ok
usb4/1 unknown empty unconfigured ok
usb4/2 unknown empty unconfigured ok
usb4/3 unknown empty unconfigured ok
usb4/4 unknown empty unconfigured ok
usb4/5 usb-hub connected configured ok
usb4/5.1 unknown empty unconfigured ok
usb4/5.2 unknown empty unconfigured ok
usb4/5.3 unknown empty unconfigured ok
usb4/5.4 unknown empty unconfigured ok
usb4/6 unknown empty unconfigured ok
usb4/7 unknown empty unconfigured ok
usb4/8 unknown empty unconfigured ok
raidctl não produz absolutamente nada
Saída de formato
-
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 8841 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@0,0
1. c0t1d0 <DELL-PERC 5/i-1.03-67.75GB>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@1,0
2. c0t2d0 <DELL-PERC 5/i-1.03-67.75GB>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@2,0
3. c0t3d0 <DELL-PERC 5/i-1.03-67.75GB>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@3,0
Specify disk (enter its number): ^C