Meu problema foi que os hdds do meu zfs invadiram parcialmente degradados e parcialmente destruídos após um raio.
Consegui detectar o problema com o zpool status:
zpool status myzfs
pool myzfs
state: DEGRADED (DESTROYED)
A boa notícia. O ZFS parece ser realmente confiável e, no meu caso, consegui recuperar o ataque completamente. Como me recuperei, veja abaixo na resposta.
Recuperando um Raid do ZFS Aprendi duas coisas:
-
1 falha na unidade traz um zpool para baixo . No entanto, um ataque baseado em espelhos stiped permanece disponível. Detalhes exlidos em ZFS: Você deve usar vdevs espelhados, não RAIDZ
- Recuperando e resilverando um
zpool baseado em raidz2-0 leva muito tempo. Você pode ser melhor com um espelho listrado. Isso tem prós e contras amplamente discutidos na internet sdfg
-
Um ataque NÃO é um backup ! Backups off-line na nuvem ou em um segundo local é uma grande vantagem e é possível hoje sem grandes recursos. A maioria dos Raids permite backups para a nuvem ou replicação do ZFS para outro NAS
Informações de depuração originais
No entanto, não é necessariamente importante detectar e resolver o problema.
Eu tenho problemas com o meu freenas 9.2.1. Ele caiu hoje. Ele está executando um servidor de arquivos no zfs jbod raid 2. Não tenho certeza do que exatamente causa os problemas. O sistema está iniciando, porém reagindo bem devagar. Dos logs, não consegui entender nada de errado. Assim, não tenho certeza de onde começar com a análise de erros e como resolvê-los.
O problema é que o sistema trava e responde muito devagar. A interface web freenas também cai desde que pyhon morre.
O Freenas é instalado em um pendrive, uma unidade adicional (2 TB) é anexada para backup. As outras 4 unidades são executadas como zfs raid.
Os discos rígidos apresentam erros inteligentes. Como posso corrigi-los? Que eles sejam o motivo dos problemas.
TOP
CPU: 0.1% user, 0.0% nice, 2.5% system, 0.1% interrupt, 97.3% idle
Mem: 131M Active, 11G Inact, 3689M Wired, 494M Cache, 3232M Buf, 16M Free
ARC: 3028K Total, 347K MFU, 1858K MRU, 16K Anon, 330K Header, 477K Other
Swap: 10G Total, 636K Used, 10G Free
DF
Filesystem Size Used Avail Capacity Mounted on
/dev/ufs/FreeNASs2a 971M 866M 27M 97% /
devfs 1.0k 1.0k 0B 100% /dev
/dev/md0 4.8M 3.5M 918k 79% /etc
/dev/md1 843k 2.6k 773k 0% /mnt
/dev/md2 156M 40M 103M 28% /var
/dev/ufs/FreeNASs4 20M 3.4M 15M 18% /data
fink-zfs01 6.0T 249k 6.0T 0% /mnt/fink-zfs01
fink-zfs01/.system 6.0T 249k 6.0T 0% /mnt/fink-zfs01/.system
fink-zfs01/.system/cores 6.0T 14M 6.0T 0% /mnt/fink-zfs01/.system/cores
fink-zfs01/.system/samba4 6.0T 862k 6.0T 0% /mnt/fink-zfs01/.system/samba4
fink-zfs01/.system/syslog 6.0T 2.7M 6.0T 0% /mnt/fink-zfs01/.system/syslog
fink-zfs01/shares 6.0T 261k 6.0T 0% /mnt/fink-zfs01/shares
fink-zfs01/shares/fink-privat 6.4T 344G 6.0T 5% /mnt/fink-zfs01/shares/fink-privat
fink-zfs01/shares/gf 6.0T 214k 6.0T 0% /mnt/fink-zfs01/shares/gf
fink-zfs01/shares/kundendaten 6.6T 563G 6.0T 9% /mnt/fink-zfs01/shares/kundendaten
fink-zfs01/shares/zubehoer 6.6T 539G 6.0T 8% /mnt/fink-zfs01/shares/zubehoer
fink-zfs01/temp 6.2T 106G 6.0T 2% /mnt/fink-zfs01/temp
/dev/ufs/Backup 1.9T 114G 1.7T 6% /mnt/Backup
/ var / log / messages
Jan 21 21:48:32 s-FreeNAS root: /etc/rc: WARNING: failed to start syslogd
Jan 21 21:48:32 s-FreeNAS kernel: .
Jan 21 21:48:32 s-FreeNAS root: /etc/rc: WARNING: failed to start watchdogd
Jan 21 21:48:32 s-FreeNAS root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Jan 21 21:48:34 s-FreeNAS ntpd[2589]: ntpd 4.2.4p5-a (1)
Jan 21 21:48:34 s-FreeNAS kernel: .
Jan 21 21:48:36 s-FreeNAS generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint,name
Jan 21 21:48:36 s-FreeNAS generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: zfs list -H -o mountpoint
Jan 21 21:48:38 s-FreeNAS last message repeated 4 times
Jan 21 21:48:38 s-FreeNAS generate_smb4_conf.py: [common.pipesubr:58] Popen()ing: /usr/local/bin/pdbedit -d 0 -i smbpasswd:/tmp/tmpEKKZ2A -e tdbsam:/var/etc/private/passdb.tdb -s /usr/local/etc/smb4.conf
Jan 21 21:48:43 s-FreeNAS ntpd[2590]: time reset -0.194758 s
Jan 21 21:48:45 s-FreeNAS smartd[2867]: Device: /dev/ada3, FAILED SMART self-check. BACK UP DATA NOW!
Jan 21 21:48:45 s-FreeNAS smartd[2867]: Device: /dev/ada3, 164 Currently unreadable (pending) sectors
Jan 21 21:48:45 s-FreeNAS smartd[2867]: Device: /dev/ada3, Failed SMART usage Attribute: 5 Reallocated_Sector_Ct.
Jan 21 21:48:45 s-FreeNAS smartd[2867]: Device: /dev/ada3, previous self-test completed with error (unknown test element)
Jan 21 21:48:51 s-FreeNAS mDNSResponder: mDNSResponder (Engineering Build) (Mar 1 2014 18:12:24) starting
Jan 21 21:48:51 s-FreeNAS mDNSResponder: 8: Listening for incoming Unix Domain Socket client requests
Jan 21 21:48:51 s-FreeNAS mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Jan 21 21:48:51 s-FreeNAS mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Jan 21 21:48:53 s-FreeNAS netatalk[3142]: Netatalk AFP server starting
Jan 21 21:48:53 s-FreeNAS cnid_metad[3179]: CNID Server listening on localhost:4700
Jan 21 21:48:53 s-FreeNAS kernel: done.
Jan 21 21:48:54 s-FreeNAS mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000800C2FD60 s-FreeNAS.local. (Addr) that's already in the list
...
Jan 21 21:48:54 s-FreeNAS mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000800C30180 109.1.1.10.in-addr.arpa. (PTR) that's already in the list
Jan 21 22:04:44 s-FreeNAS kernel: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 1572950, size: 8192
...
Jan 21 22:05:25 s-FreeNAS kernel: GEOM_ELI: g_eli_read_done() failed ada0p1.eli[READ(offset=110592, length=4096)]
Jan 21 22:05:25 s-FreeNAS kernel: swap_pager: I/O error - pagein failed; blkno 1572894,size 4096, error 5
Jan 21 22:05:25 s-FreeNAS kernel: vm_fault: pager read error, pid 3020 (python2.7)
Jan 21 22:05:25 s-FreeNAS kernel: Failed to write core file for process python2.7 (error 14)
...
Jan 21 22:19:44 s-FreeNAS kernel: (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 70 02 00 40 00 00 00 00 00 00
Jan 21 22:19:44 s-FreeNAS kernel: (ada0:ahcich0:0:0:0): CAM status: ATA Status Error
Jan 21 22:19:44 s-FreeNAS kernel: (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC )
Jan 21 22:19:44 s-FreeNAS kernel: (ada0:ahcich0:0:0:0): RES: 41 40 70 02 00 40 00 00 00 00 00
Jan 21 22:19:44 s-FreeNAS kernel: (ada0:ahcich0:0:0:0): Error 5, Retries exhausted
Jan 21 22:19:44 s-FreeNAS kernel: GEOM_ELI: g_eli_read_done() failed ada0p1.eli[READ(offset=253952, length=4096)]
Jan 21 22:19:44 s-FreeNAS kernel: swap_pager: I/O error - pagein failed; blkno 1572929,size 4096, error 5
Jan 21 22:19:44 s-FreeNAS kernel: vm_fault: pager read error, pid 2869 (smartd)
Jan 21 22:19:44 s-FreeNAS kernel: Failed to write core file for process smartd (error 14)
Jan 21 22:19:44 s-FreeNAS kernel: pid 2869 (smartd), uid 0: exited on signal 11
smartctl --scan
/dev/ada0 -d atacam # /dev/ada0, ATA device
/dev/ada1 -d atacam # /dev/ada1, ATA device
/dev/ada2 -d atacam # /dev/ada2, ATA device
/dev/pass3 -d atacam # /dev/pass3, ATA device
/dev/ada3 -d atacam # /dev/ada3, ATA device
/dev/ada4 -d atacam # /dev/ada4, ATA device
/dev/ada5 -d atacam # /dev/ada5, ATA device
smartctl -a / dev / ada3
smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD4000F9YZ-09N20L0
Serial Number: WD-WMC1F1211607
LU WWN Device Id: 5 0014ee 0ae5c0b4c
Firmware Version: 01.01A01
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jan 21 23:07:55 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: (41640) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 451) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 187 187 051 Pre-fail Always - 553
3 Spin_Up_Time 0x0027 142 138 021 Pre-fail Always - 11900
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 93
5 Reallocated_Sector_Ct 0x0033 139 139 140 Pre-fail Always FAILING_NOW 1791
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7553
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 93
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 59
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 35
194 Temperature_Celsius 0x0022 108 098 000 Old_age Always - 44
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 353
197 Current_Pending_Sector 0x0032 200 199 000 Old_age Always - 162
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: unknown failure 90% 7553 -
# 2 Short offline Completed: unknown failure 90% 7552 -
# 3 Short offline Completed: unknown failure 90% 7551 -
# 4 Short offline Completed: unknown failure 90% 7550 -
# 5 Short offline Completed: unknown failure 90% 7549 -
# 6 Short offline Completed: unknown failure 90% 7548 -
# 7 Short offline Completed: unknown failure 90% 7547 -
# 8 Short offline Completed: unknown failure 90% 7546 -
# 9 Short offline Completed: unknown failure 90% 7545 -
#10 Short offline Completed: unknown failure 90% 7544 -
#11 Short offline Completed: unknown failure 90% 7543 -
#12 Short offline Completed: unknown failure 90% 7542 -
#13 Short offline Completed without error 00% 7541 -
#14 Short offline Completed without error 00% 7540 -
#15 Short offline Completed: read failure 10% 7538 1148054536
#16 Short offline Completed: read failure 10% 7538 1148054536
#17 Short offline Completed: read failure 10% 7536 1148057328
#18 Short offline Completed: read failure 10% 7535 1148057328
#19 Short offline Completed without error 00% 7530 -
#20 Short offline Completed without error 00% 7529 -
#21 Short offline Completed: read failure 10% 7528 1148057328
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.