EDITAR 11/03/2018
eu corri:
varnishd -f /etc/sysconfig/varnish
Eu tenho:
Unterminated string at (input Line 96 Pos 13) DAEMON_OPTS="-a
${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
------------###################################################### Running
VCC-compiler failed, exit 1 VCL compilation failed
Meu arquivo / etc / sysconfig / verniz tem esta aparência:
# Configuration file for varnish
#
# /etc/init.d/varnish expects the variable $DAEMON_OPTS to be set from this
# shell script fragment.
#
# Maximum number of open files (for ulimit -n)
NFILES=131072
# Locked shared memory (for ulimit -l)
# Default log size is 82MB + header
MEMLOCK=82000
# Maximum size of corefile (for ulimit -c). Default in Fedora is 0
# DAEMON_COREFILE_LIMIT="unlimited"
# Set this to 1 to make init script reload try to switch vcl without restart.
# To make this work, you need to set the following variables
# explicit: VARNISH_VCL_CONF, VARNISH_ADMIN_LISTEN_ADDRESS,
# VARNISH_ADMIN_LISTEN_PORT, VARNISH_SECRET_FILE, or in short,
# use Alternative 3, Advanced configuration, below
RELOAD_VCL=1
# This file contains 4 alternatives, please use only one.
## Alternative 1, Minimal configuration, no VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# content server on localhost:8080. Use a fixed-size cache file.
#
#DAEMON_OPTS="-a :6081 \
# -T localhost:6082 \
# -b localhost:8080 \
# -u varnish -g varnish \
# -s file,/var/lib/varnish/varnish_storage.bin,1G"
## Alternative 2, Configuration with VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# one content server selected by the vcl file, based on the request. Use a
# fixed-size cache file.
#
#DAEMON_OPTS="-a :6081 \
# -T localhost:6082 \
# -f /etc/varnish/default.vcl \
# -u varnish -g varnish \
# -S /etc/varnish/secret \
# -s file,/var/lib/varnish/varnish_storage.bin,1G"
## Alternative 3, Advanced configuration
#
# See varnishd(1) for more information.
#
# # Main configuration file. You probably want to change it :)
VARNISH_VCL_CONF=/etc/varnish/default.vcl
#
# # Default address and port to bind to
# # Blank address means all IPv4 and IPv6 interfaces, otherwise specify
# # a host name, an IPv4 dotted quad, or an IPv6 address in brackets.
# VARNISH_LISTEN_ADDRESS=
VARNISH_LISTEN_PORT=80
#
# # Telnet admin interface listen address and port
VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
VARNISH_ADMIN_LISTEN_PORT=6082
#
# # Shared secret file for admin interface
VARNISH_SECRET_FILE=/etc/varnish/secret
#
# # The minimum number of worker threads to start
VARNISH_MIN_THREADS=1
#
# # The Maximum number of worker threads to start
VARNISH_MAX_THREADS=1000
#
# # Idle timeout for worker threads
VARNISH_THREAD_TIMEOUT=120
#
# # Cache file location
VARNISH_STORAGE_FILE=/var/lib/varnish/varnish_storage.bin
#
# # Cache file size: in bytes, optionally using k / M / G / T suffix,
# # or in percentage of available disk space using the % suffix.
VARNISH_STORAGE_SIZE=1G
#
# # Backend storage specification
VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}"
#
# # Default TTL used when the backend does not specify one
VARNISH_TTL=120
#
# # DAEMON_OPTS is used by the init script. If you add or remove options, make
# # sure you update this section, too.
DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
-f ${VARNISH_VCL_CONF} \
-T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT} \
-t ${VARNISH_TTL} \
-w ${VARNISH_MIN_THREADS},${VARNISH_MAX_THREADS},${VARNISH_THREAD_TIMEOUT} \
-u varnish -g varnish \
-S ${VARNISH_SECRET_FILE} \
-s ${VARNISH_STORAGE}"
#
## Alternative 4, Do It Yourself. See varnishd(1) for more information.
#
# DAEMON_OPTS=""
ORIGINAL
Eu corro verniz com drupal, em centos. Funcionou apenas arquivo, quando de repente parou de funcionar. Em:
service varnish start
Eu recebo:
Starting varnish HTTP accelerator: [ OK ]
Mas quando eu verifico o status, recebo:
varnishd dead but pid file exists
Os logs estão vazios. Não recebo erros e:
varnishncsa (pid 2205) is running...
Eu tentei:
varnishd -f /etc/varnish/default.vcl
E tenho:
storage_file: filename: ./varnish.RvBKcH size 33193 MB.
Using old SHMFILE
Eu não consegui encontrar nada sobre isso.
Espero que alguém possa me ajudar. Não encontrei nada sobre este assunto.
Este é meu deaflt.vcl:
# This is a basic VCL configuration file for varnish. See the vcl(7)
# man page for details on VCL syntax and semantics.
#
# Default backend definition. Set this to point to your content
# server.
# backend default { .host = "mydomain.com"; .port = "port_num"; .connect_timeout = 3600s; .first_byte_timeout = 3600s; .between_bytes_timeout = 3600s; }
#
# Below is a commented-out copy of the default VCL logic. If you
# redefine any of these subroutines, the built-in logic will be
# appended to your code.
# sub vcl_recv {
# Add a unique header containing the client address
remove req.http.X-Forwarded-For;
set req.http.X-Forwarded-For = client.ip;
# set the custom header
if (req.http.Cookie ~ "ABtesting=B") {
set req.http.X-ABtesting = "B";
} else {
set req.http.X-ABtesting = "A";
}
# do this only once per request
if (req.restarts == 0) {
# normalize Accept-Encoding to reduce vary
if (req.http.Accept-Encoding) {
if (req.http.User-Agent ~ "MSIE 6") {
unset req.http.Accept-Encoding;
} elsif (req.http.Accept-Encoding ~ "gzip") {
set req.http.Accept-Encoding = "gzip";
} elsif (req.http.Accept-Encoding ~ "deflate") {
set req.http.Accept-Encoding = "deflate";
} else {
unset req.http.Accept-Encoding;
}
}
}
if (req.http.User-Agent ~ "(Mobile|Android|iPhone|iPad)") {
set req.http.User-Agent = "mobile";
} else {
set req.http.User-Agent = "desktop";
}
if (req.request != "GET" &&
req.request != "HEAD" &&
req.request != "PUT" &&
req.request != "POST" &&
req.request != "TRACE" &&
req.request != "OPTIONS" &&
req.request != "DELETE") {
/* Non-RFC2616 or CONNECT which is weird. */
return (pipe);
}
if (req.request != "GET" && req.request != "HEAD") {
/* We only deal with GET and HEAD by default */
return (pass);
}
// Remove has_js and Google Analytics __* cookies.
set req.http.Cookie = regsuball(req.http.Cookie, "(^|;\s*)(_[_a-z]+|has_js)=[^;]*", "");
// Remove a ";" prefix, if present.
set req.http.Cookie = regsub(req.http.Cookie, "^;\s*", "");
if (req.http.Authorization /*|| req.http.Cookie*/) {
/* Not cacheable by default */
return (pass);
}
return (lookup); }
#
# sub vcl_pipe {
# # Note that only the first request to the backend will have
# # X-Forwarded-For set. If you use X-Forwarded-For and want to
# # have it set for all requests, make sure to have:
# # set bereq.http.connection = "close";
# # here. It is not set by default as it might break some broken web
# # applications, like IIS with NTLM authentication.
# return (pipe);
# }
#
# sub vcl_pass {
# return (pass);
# }
#
# sub vcl_hash {
# set req.hash += req.url;
# if (req.http.host) {
# set req.hash += req.http.host;
# } else {
# set req.hash += server.ip;
# }
# return (hash);
# }
#
# sub vcl_hit {
# if (!obj.cacheable) {
# return (pass);
# }
# return (deliver);
# }
#
# sub vcl_miss {
# return (fetch);
# }
# sub vcl_fetch {
if (beresp.ttl > 0s) {
/* Remove Expires from backend, it's not long enough */
unset beresp.http.expires;
/* Set the clients TTL on this object */
set beresp.http.cache-control = "max-age=900";
/* Set how long Varnish will keep it */
set beresp.ttl = 1w;
/* marker for vcl_deliver to reset Age: */
set beresp.http.magicmarker = "1";
}
# vary on the custom header
if (beresp.http.Vary) {
set beresp.http.Vary = beresp.http.Vary ", X-ABtesting";
} else {
set beresp.http.Vary = "X-ABtesting";
}
if (!beresp.cacheable) {
return (pass);
}
if (beresp.http.Set-Cookie) {
return (pass);
}
return (deliver); }
# sub vcl_deliver {
if (resp.http.Vary) {
set resp.http.Vary = regsub(resp.http.Vary, "X-ABtesting", "Cookie");
}
if (resp.http.magicmarker) {
/* Remove the magic marker */
unset resp.http.magicmarker;
/* By definition we have a fresh object */
set resp.http.age = "0";
}
return (deliver); }
#
# sub vcl_error {
# set obj.http.Content-Type = "text/html; charset=utf-8";
# synthetic {"
# <?xml version="1.0" encoding="utf-8"?>
# <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
# "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
# <html>
# <head>
# <title>"} obj.status " " obj.response {"</title>
# </head>
# <body>
# <h1>Error "} obj.status " " obj.response {"</h1>
# <p>"} obj.response {"</p>
# <h3>Guru Meditation:</h3>
# <p>XID: "} req.xid {"</p>
# <hr>
# <p>Varnish cache server</p>
# </body>
# </html>
# "};
# return (deliver);
# }