Eu quero que minha interface VMware vmxnet3 seja atualizada com o DHCP na inicialização. Eu posso configurar manualmente o NIC com:
# ifconfig vmxnet3s0 plumb
# ipadm create-addr -T dhcp vmxnet3s0/v4dhcp
Mas depois de criar /etc/dhcp.vmxnet3s0 e reinicializar, a interface está inativa e os logs são exibidos:
Aug 13 09:34:15 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no
Aug 13 09:34:15 neumann vmxnet3s: [ID 715698 kern.notice] vmxnet3s:0: stop()
Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x200000) -> no
Aug 13 09:34:17 neumann vmxnet3s: [ID 920500 kern.notice] vmxnet3s:0: start()
Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(TxRingSize) -> 256
Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxRingSize) -> 256
Aug 13 09:34:17 neumann vmxnet3s: [ID 778983 kern.notice] vmxnet3s:0: getprop(RxBufPoolLimit) -> 512
Aug 13 09:34:17 neumann nwamd[491]: [ID 605049 daemon.error] 1: nwamd_set_unset_link_properties: dladm_set_linkprop failed: operation not supported
Aug 13 09:34:17 neumann vmxnet3s: [ID 654879 kern.notice] vmxnet3s:0: getcapab(0x20000) -> no
Aug 13 09:34:17 neumann nwamd[491]: [ID 751932 daemon.error] 1: nwamd_down_interface: ipadm_delete_addr failed on vmxnet3s0: Object not found
Aug 13 09:34:17 neumann nwamd[491]: [ID 819019 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv4 failed for vmxnet3s0: Operation not supported on disabled object
Aug 13 09:34:17 neumann nwamd[491]: [ID 160156 daemon.error] 1: nwamd_plumb_unplumb_interface: plumb IPv6 failed for vmxnet3s0: Operation not supported on disabled object
Aug 13 09:34:17 neumann nwamd[491]: [ID 771489 daemon.error] 1: add_ip_address: ipadm_create_addr failed on vmxnet3s0: Operation not supported on disabled object
Aug 13 09:34:17 neumann nwamd[491]: [ID 405346 daemon.error] 9: start_dhcp: ipadm_create_addr failed for vmxnet3s0: Operation not supported on disabled object
Tentei desativar o network/physical:nwam em favor de network/physical:default . Isso funciona, a interface é ativada, mas physical:default falha e meus serviços de rede (por exemplo, NFS) se recusam a iniciar.
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
vmxnet3s0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:1: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:2: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:3: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:4: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:5: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:6: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:7: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
vmxnet3s0:8: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 9000 index 2
inet 192.168.178.248 netmask ffffff00 broadcast 192.168.178.255
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
vmxnet3s0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 2
inet6 ::/0
# cat /var/svc/log/network-physical\:default.log
[ Aug 16 09:46:39 Enabled. ]
[ Aug 16 09:46:41 Executing start method ("/lib/svc/method/net-physical"). ]
[ Aug 16 09:46:41 Timeout override by svc.startd. Using infinite timeout. ]
starting DHCP on primary interface vmxnet3s0
ifconfig: vmxnet3s0: DHCP is already running
[ Aug 16 09:46:43 Method "start" exited with status 96. ]
NFS server not running:
# svcs -xv network/nfs/server
svc:/network/nfs/server:default (NFS server)
State: offline since August 16, 2012 09:46:40 AM UTC
Reason: Service svc:/network/physical:default
is not running because a method failed.
See: http://illumos.org/msg/SMF-8000-GE
Path: svc:/network/nfs/server:default
svc:/milestone/network:default
svc:/network/physical:default
Reason: Service svc:/network/physical:nwam is disabled.
See: http://illumos.org/msg/SMF-8000-GE
Path: svc:/network/nfs/server:default
svc:/milestone/network:default
svc:/network/physical:nwam
Reason: Service svc:/network/nfs/nlockmgr:default is disabled.
See: http://illumos.org/msg/SMF-8000-GE
Path: svc:/network/nfs/server:default
svc:/network/nfs/nlockmgr:default
See: man -M /usr/share/man -s 1M nfsd
Impact: This service is not running.
Sou novo no mundo do Solaris, portanto, qualquer solução de ajuda seria muito apreciada. Obrigado!