redhat, multipath no nó do cluster exibe resultados diferentes

Question

Eu tenho um cluster com dois nós instalados com o "RedHat Entreprise Linux Server 5.6"

Se eu executar "multipath -ll" neles, não obtenho o mesmo resultado. Eu verifiquei em "multipathd -k" com "show paths" e não obtive todos os caminhos no server1.

Observe que "server1" é o nó ativo no cluster.

Por favor, como posso resolver este problema?

Agradecemos antecipadamente pela sua grande ajuda

    server1root#multipath -ll
    mpath2 (3600c0ff000134c3e8d11e44f01000000) dm-2 HP,P2000 G3 FC
    [size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=10][active]
     \_ 3:0:0:3 sdc 8:32  [active][ready]
    mpath1 (3600c0ff000134c3e6e11e44f01000000) dm-1 HP,P2000 G3 FC
    [size=95M][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=10][active]
     \_ 3:0:0:2 sdb 8:16  [active][ready]
    mpath0 (3600c0ff000118c37dc11e44f01000000) dm-0 HP,P2000 G3 FC
    [size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 3:0:0:1 sda 8:0   [active][ready]
    mpath4 (3600c0ff000134c3e4912e44f01000000) dm-4 HP,P2000 G3 FC
    [size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=10][active]
     \_ 3:0:0:5 sde 8:64  [active][ready]
    mpath3 (3600c0ff000118c371d12e44f01000000) dm-3 HP,P2000 G3 FC
    [size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 3:0:0:4 sdd 8:48  [active][ready]
    server1root#

    multipathd> show paths
    hcil    dev dev_t pri dm_st   chk_st  next_check
    3:0:0:1 sda 8:0   50  [active][ready] XXXXXXXXX. 19/20
    3:0:0:2 sdb 8:16  10  [active][ready] XXXXXXXXX. 19/20
    3:0:0:3 sdc 8:32  10  [active][ready] XXXXXXXXX. 19/20
    3:0:0:4 sdd 8:48  50  [active][ready] XXXXXXXXX. 19/20
    3:0:0:5 sde 8:64  10  [active][ready] XXXXXXXXX. 19/20
    multipathd>


    server2root#multipath -ll
    mpath2 (3600c0ff000134c3e8d11e44f01000000) dm-2 HP,P2000 G3 FC
    [size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 2:0:0:3 sdc 8:32  [active][ready]
    \_ round-robin 0 [prio=10][enabled]
     \_ 3:0:0:3 sdh 8:112 [active][ready]
    mpath1 (3600c0ff000134c3e6e11e44f01000000) dm-1 HP,P2000 G3 FC
    [size=95M][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 2:0:0:2 sdb 8:16  [active][ready]
    \_ round-robin 0 [prio=10][enabled]
     \_ 3:0:0:2 sdg 8:96  [active][ready]
    mpath0 (3600c0ff000118c37dc11e44f01000000) dm-0 HP,P2000 G3 FC
    [size=558G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 3:0:0:1 sdf 8:80  [active][ready]
    \_ round-robin 0 [prio=10][enabled]
     \_ 2:0:0:1 sda 8:0   [active][ready]
    mpath4 (3600c0ff000134c3e4912e44f01000000) dm-4 HP,P2000 G3 FC
    [size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 2:0:0:5 sde 8:64  [active][ready]
    \_ round-robin 0 [prio=10][enabled]
     \_ 3:0:0:5 sdj 8:144 [active][ready]
    mpath3 (3600c0ff000118c371d12e44f01000000) dm-3 HP,P2000 G3 FC
    [size=279G][features=1 queue_if_no_path][hwhandler=0][rw]
    \_ round-robin 0 [prio=50][active]
     \_ 3:0:0:4 sdi 8:128 [active][ready]
    \_ round-robin 0 [prio=10][enabled]
     \_ 2:0:0:4 sdd 8:48  [active][ready]
    server2root#

    multipathd> show paths
    hcil    dev dev_t pri dm_st   chk_st  next_check
    2:0:0:1 sda 8:0   10  [active][ready] XXX....... 7/20
    2:0:0:2 sdb 8:16  50  [active][ready] XXX....... 7/20
    2:0:0:3 sdc 8:32  50  [active][ready] XXX....... 7/20
    2:0:0:4 sdd 8:48  10  [active][ready] XXX....... 7/20
    2:0:0:5 sde 8:64  50  [active][ready] XXX....... 7/20
    3:0:0:1 sdf 8:80  50  [active][ready] XXX....... 7/20
    3:0:0:2 sdg 8:96  10  [active][ready] XXX....... 7/20
    3:0:0:3 sdh 8:112 10  [active][ready] XXX....... 7/20
    3:0:0:4 sdi 8:128 50  [active][ready] XXX....... 7/20
    3:0:0:5 sdj 8:144 10  [active][ready] XXX....... 7/20
    multipathd>

    

Answer 1

Isso se parece com o que acontece quando há um problema de zoneamento de SAN, impedindo o servidor nº 1 de ver uma das interfaces da SAN, ou você está tendo problemas com um dos HBAs do servidor # 1.