O suporte SMART é: Indisponível - Dispositivos de interface de pacotes [este dispositivo: Reservado] não suporta ATA SMART

Question

Portanto, eu tenho um servidor com 7 hardisks, cada um deles com smartmontools habilitado, exceto o 7º hardisk (/ dev / sdg). Tentei força permitindo que, não funcionou.

[email protected]:~# smartctl -a /dev/sdg
[unusually long delay]
=== START OF INFORMATION SECTION ===
Device Model:     CçS
Serial Number:    T- ^Rֻdª ª)EM½µr¢
Firmware Version: Q­Å{õM
User Capacity:    1,257,344,326,144 bytes [1.25 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    19867 rpm
Form Factor:      Unknown (0xf9e3)
Device is:        Not in smartctl database [for details use: -P showall]
...
SMART support is: Unavailable - Packet Interface Devices [this device:        
Reserved] don't support ATA SMART

A mandatory SMART command failed: exiting.

Ran:

[email protected]:~# smartctl -H  /dev/sdg
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke,    
www.smartmontools.org

SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show    if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Até tentou ativar o smartctl:

[email protected]:~# smartctl -T permissive -s on /dev/sdg1
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke,   
www.smartmontools.org

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
unable to fetch IEC (SMART) mode page [unsupported field in scsi command]