O redirecionamento acontece após a negociação SSL. Se você não clicar em OK quando receber o aviso, o navegador não avançará com a conexão e, portanto, não obterá o redirecionamento.
Estou tendo um problema curioso. Como meu servidor não tem certificado SSL e eu quero evitar o feio aviso "Este site não é seguro", decidi redirecionar https para http.
Eu tenho meu site, digamos mywebsite.com
quando faço
https://www.mywebsite.com
redireciona para http://mywebsite.com como pretendido
mas quando eu faço
https://mywebsite.com
Não recebo redirecionamentos e meu navegador me diz que o site não é seguro.
TL; DR:
Eu quero
https://*mywebsite.com to redirect to http://*mywebsite.com
Eu tenho
https://mywebsite.com not redirecting
https://www.mywebsite.com redirecting to http://mywebsite.com
Aqui está meu default-ssl.vhost
<IfModule mod_ssl.c>
<VirtualHost *:443>
ServerAdmin webmaster@localhost
DocumentRoot /
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined
Alias /doc/ "/usr/share/doc/"
<Directory "/usr/share/doc/">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
</Directory>
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# A self-signed (snakeoil) certificate can be created by installing
# the ssl-cert package. See
# /usr/share/doc/apache2.2-common/README.Debian.gz for more info.
# If both key and certificate are stored in the same file, only the
# SSLCertificateFile directive is needed.
# SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem
# SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
SSLCertificateFile /etc/ssl/certs/******.******.com.crt
SSLCertificateKeyFile /etc/ssl/private/*******.******.com.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/ssl/certs/
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl/
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the 'one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: 'xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related 'SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory /usr/lib/cgi-bin>
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-6]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# MSIE 7 and newer should be able to use keepalive
BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
RewriteEngine On
RewriteCond %{HTTPS} on
RewriteRule (.*) http://%{HTTP_HOST}%{REQUEST_URI} [NC,R=301,L]
</VirtualHost>
</IfModule>
E meu vhost para o site
<Directory /var/www/mywebsite.com>
AllowOverride None
Order Deny,Allow
Deny from all
</Directory>
<VirtualHost *:80>
DocumentRoot /var/www/mywebsite.com/web
ServerName mywebsite.com
ServerAlias www.mywebsite.com
ServerAdmin [email protected]
ErrorLog /var/log/ispconfig/httpd/mywebsite.com/error.log
ErrorDocument 400 /error/400.html
ErrorDocument 401 /error/401.html
ErrorDocument 403 /error/403.html
ErrorDocument 404 /error/404.html
ErrorDocument 405 /error/405.html
ErrorDocument 500 /error/500.html
ErrorDocument 503 /error/503.html
<Directory /var/www/mywebsite.com/web>
Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
<Directory /var/www/clients/client0/web6/web>
Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
# Clear PHP settings of this website
<FilesMatch "\.ph(p3?|tml)$">
SetHandler None
</FilesMatch>
# php as fast-cgi enabled
<IfModule mod_fcgid.c>
# SocketPath /tmp/fcgid_sock/
# IdleTimeout n (3600 seconds)
# An idle fastcgi application will be terminated after IdleTimeout seconds.
IdleTimeout 3600
# ProcessLifeTime n (7200 seconds)
# A fastcgi application will be terminated if lifetime expired, even no error is detected.
ProcessLifeTime 7200
# MaxProcessCount n (1000)
# The max count of total fastcgi process count.
# MaxProcessCount 1000
# DefaultMinClassProcessCount n (3)
# The minimum number of fastcgi application instances for any one fastcgi application.
# Idle fastcgi will not be killed if their count is less than n
# Set this to 0, and tweak IdleTimeout
DefaultMinClassProcessCount 0
# DefaultMaxClassProcessCount n (100)
# The maximum number of fastcgi application instances allowed to run for
# particular one fastcgi application.
DefaultMaxClassProcessCount 100
# IPCConnectTimeout n (3 seconds)
# The connect timeout to a fastcgi application.
IPCConnectTimeout 8
# IPCCommTimeout n (20 seconds)
# The communication timeout to a fastcgi application. Please increase this
# value if your CGI have a slow initialization or slow respond.
IPCCommTimeout 360
# BusyTimeout n (300 seconds)
# A fastcgi application will be terminated if handing a single request
# longer than busy timeout.
BusyTimeout 300
</IfModule>
<Directory /var/www/mywebsite.com/web>
AddHandler fcgid-script .php .php3 .php4 .php5
FCGIWrapper /var/www/php-fcgi-scripts/web6/.php-fcgi-starter .php
Options +ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
<Directory /var/www/clients/client0/web6/web>
AddHandler fcgid-script .php .php3 .php4 .php5
FCGIWrapper /var/www/php-fcgi-scripts/web6/.php-fcgi-starter .php
Options +ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
# add support for apache mpm_itk
<IfModule mpm_itk_module>
AssignUserId web6 client0
</IfModule>
<IfModule mod_dav_fs.c>
# DO NOT REMOVE THE COMMENTS!
# IF YOU REMOVE THEM, WEBDAV WILL NOT WORK ANYMORE!
# WEBDAV BEGIN
# WEBDAV END
</IfModule>
DocumentRoot /var/www/mywebsite.com/web/public
SetEnv APPLICATION_ENV development
RewriteCond %{HTTP_HOST} ^www\.(.*)$ [NC]
RewriteRule ^/(.*)$ http://%1/$1 [R=301,L]
</VirtualHost>
Eu simplesmente não consigo encontrar porque eu tenho esse comportamento e isso está ficando muito louco. Os arquivos vhost são os padrões ISPConfig ligeiramente modificados para fazer um redirecionamento e alterar o Documentroot para acomodar a estrutura MVC do site.
Tags ssl https apache-2.2 http