Eu tento configurar IPv4 estático & Configuração IPv6 no CentOS 6.2.
A configuração abaixo funciona perfeitamente:
# ifconfig eth0 x.x.x.x/29
# route add defalt gw x.x.x.y
# ip addr add dev eth0 XXXX:C810:3001:D00::3/56
# ip -6 route add default XXXX:C810:3001:D00::1
No entanto, quero manter essa configuração após uma reinicialização.
Então fiz a seguinte configuração:
Ativando o IPv6
[root@test network-scripts]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=test.net
NETWORKING_IPV6=yes
Configuração da interface
[root@test network-scripts]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="static"
ONBOOT="yes"
HWADDR="2C:C3:AC:A8:C3:3E"
IPADDR=x.x.x.x
GATEWAY=x.x.x.x
NETMASK=255.255.255.248
TYPE=Ethernet
IPV6INIT=yes
IPV6ADDR=XXXX:C810:3001:D00::3/56
IPV6_DEFAULTGW=XXXX:C810:3001:D00::1
DNS1=208.67.222.222
DNS2=208.67.220.220
# Only DNS{1,2} according to /usr/share/doc/initscripts-9.03.27/sysconfig.txt
# DNS3=2620:0:ccc::2
# DNS4=2620:0:ccD::2
Reiniciando a rede
[root@test network-scripts]# service network restart
Arrêt de l'interface eth0 : État du périphérique : 3 (déconnecté)
[ OK ]
Arrêt de l'interface loopback : [ OK ]
Activation de l'interface loopback : [ OK ]
Activation de l'interface eth0 : État de connexion active : activation
État de chemin actif : /org/freedesktop/NetworkManager/ActiveConnection/3
état : activé
Connexion activée
[ OK ]
[root @ teste de scripts de rede] # cat / var / log / message
Mar 13 14:32:13 test NetworkManager[8299]: <info> (eth0): device state change: 8 -> 3 (reason 39)
Mar 13 14:32:13 test NetworkManager[8299]: <info> (eth0): deactivating device (reason: 39).
Mar 13 14:32:13 test avahi-daemon[8311]: Withdrawing address record for x.x.x.x on eth0.
Mar 13 14:32:13 test avahi-daemon[8311]: Leaving mDNS multicast group on interface eth0.IPv4 with address x.x.x.x.
Mar 13 14:32:13 test avahi-daemon[8311]: Interface eth0.IPv4 no longer relevant for mDNS.
Mar 13 14:32:14 test kernel: lo: Disabled Privacy Extensions
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) starting connection 'System eth0'
Mar 13 14:32:14 test NetworkManager[8299]: <info> (eth0): device state change: 3 -> 4 (reason 0)
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Mar 13 14:32:14 test NetworkManager[8299]: <info> (eth0): device state change: 4 -> 5 (reason 0)
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Mar 13 14:32:14 test NetworkManager[8299]: <info> (eth0): device state change: 5 -> 7 (reason 0)
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Beginning IP6 addrconf.
Mar 13 14:32:14 test avahi-daemon[8311]: Withdrawing address record for fe80::1ec1:deff:feb8:a2fd on eth0.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
Mar 13 14:32:14 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Mar 13 14:32:15 test avahi-daemon[8311]: Registering new address record for fe80::1ec1:deff:feb8:a2fd on eth0.*.
Mar 13 14:32:35 test NetworkManager[8299]: <info> (eth0): IP6 addrconf timed out or failed.
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) started...
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) complete.
Mar 13 14:32:35 test NetworkManager[8299]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Mar 13 14:32:35 test avahi-daemon[8311]: Joining mDNS multicast group on interface eth0.IPv4 with address x.x.x.x.
Mar 13 14:32:35 test avahi-daemon[8311]: New relevant interface eth0.IPv4 for mDNS.
Mar 13 14:32:35 test avahi-daemon[8311]: Registering new address record for x.x.x.x on eth0.IPv4.
Mar 13 14:32:36 test NetworkManager[8299]: <info> (eth0): device state change: 7 -> 8 (reason 0)
Mar 13 14:32:36 test NetworkManager[8299]: <info> Policy set 'System eth0' (eth0) as default for IPv4 routing and DNS.
Mar 13 14:32:36 test NetworkManager[8299]: <info> Activation (eth0) successful, device activated.
Mar 13 14:32:36 test NetworkManager[8299]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
A configuração do IPv6 não está funcionando ...
[root@test network-scripts]# ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 1c:c1:de:b8:a3:fd brd ff:ff:ff:ff:ff:ff
inet x.x.x.x/29 brd x.x.x.x scope global eth0
inet6 fe80::1ec1:deff:feb8:a3fd/64 scope link
valid_lft forever preferred_lft forever
Os endereços IPv6 dos resolvedores nem estão no resolv.conf!
Eu perdi uma etapa de configuração?
Eu pensei que a configuração do IPv6 seria uma formalidade.
[root@test network-scripts]# lsb_release -a
LSB Version: :core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-noarch
Distributor ID: CentOS
Description: CentOS release 6.2 (Final)
Release: 6.2
Codename: Final