Como posso obter o xrandr para detectar ambas as placas nvidia: 2 x GTX480, cabeça tripla?

9
  • Estou executando o Linux Mint 16 (Petra)
  • Estou executando o driver padrão nvidia-319 enviado com a distro
  • tenho 2 cartas GTX480
  • tenho 3 monitores
  • Usando o driver Nvidia, todos os monitores e GPUs são escolhidos pelo utilitário proprietário.

No entanto, similarmente ao relatório em link quando executo xrandr --listproviders Eu só sou mostrado um único provedor - o primeiro cartão. Eu tenho xrandr 1.4, então deve ser capaz de ver ambos. Se eu configurar uma tela X separada e, em seguida, xrandr --listproviders --screen 1, posso ver a segunda placa. No entanto, eu não quero várias telas X; Eu quero ser capaz de fluir perfeitamente entre os monitores.

Eu não quero rodar o xinerama já que é uma dor no pescoço para configurar e deve ser substituído pelo xrandr.

Usando o driver nouveau, posso usar todas as três telas exatamente como gostaria, mas o desempenho não é bom.

Então, tenho algumas perguntas:

1.) Esse comportamento é por design ou um bug? Observo no link que o driver suporta apenas o recurso de saída de origem; isso me impediria de ver dois provedores de cartão diferentes no xrandr?

2.) Se o primeiro é verdadeiro, existe uma maneira que eu possa contornar isso?

3.) Eu brinquei com várias opções basemosaicas, sem sucesso

A última configuração que tentei foi:

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Ancor Communications Inc ASUS VS247"
    HorizSync       24.0 - 83.0
    VertRefresh     50.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG Electronics W2243"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: unknown, VertRefresh source: unknown
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "AOC LM720/LM720A"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 480"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 480"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 480"
    BusID          "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"       
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "BaseMosaic" "True"
    Option         "MetaModes" "GPU-1.CRT-0: 1280x1024+0+0, GPU-0.CRT-0: 1920x1080+1280+0, GPU-0.DFP-2: 1920x1080+3200+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"       
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "BaseMosaic" "True"
    Option         "MetaModes" "GPU-1.CRT-0: 1280x1024+0+0, GPU-0.CRT-0: 1920x1080+1280+0, GPU-0.DFP-2: 1920x1080+3200+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"       
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "BaseMosaic" "True"
    Option         "MetaModes" "GPU-1.CRT-0: 1280x1024+0+0, GPU-0.CRT-0: 1920x1080+1280+0, GPU-0.DFP-2: 1920x1080+3200+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

O log X quando executado sem config é:

[     6.896] 
X.Org X Server 1.14.5
Release Date: 2013-12-12
[     6.896] X Protocol Version 11, Revision 0
[     6.896] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[     6.896] Current Operating System: Linux theoria 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64
[     6.896] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.0-12-generic root=UUID=3a6b3275-5e15-40c7-8de6-9eea1c63ebe1 ro quiet splash acpi_enforce_resources=lax
[     6.896] Build Date: 17 December 2013  10:06:15AM
[     6.896] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support) 
[     6.896] Current version of pixman: 0.30.2
[     6.896]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[     6.896] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.896] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  9 07:12:33 2014
[     6.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.897] (==) No Layout section.  Using the first Screen section.
[     6.897] (==) No screen section available. Using defaults.
[     6.897] (**) |-->Screen "Default Screen Section" (0)
[     6.897] (**) |   |-->Monitor "<default monitor>"
[     6.898] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[     6.899] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[     6.899] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     6.899] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.899] (II) Loader magic: 0x7fe4b0739d20
[     6.899] (II) Module ABI versions:
[     6.899]    X.Org ANSI C Emulation: 0.4
[     6.899]    X.Org Video Driver: 14.1
[     6.899]    X.Org XInput driver : 19.1
[     6.899]    X.Org Server Extension : 7.0
[     6.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.900] (II) xfree86: Adding drm device (/dev/dri/card1)
[     6.901] (--) PCI:*(0:1:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     6.901] (--) PCI: (0:2:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xf0000000/33554432, 0xd0000000/134217728, 0xd8000000/67108864, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[     6.901] (II) Open ACPI successful (/var/run/acpid.socket)
[     6.901] Initializing built-in extension Generic Event Extension
[     6.901] Initializing built-in extension SHAPE
[     6.901] Initializing built-in extension MIT-SHM
[     6.901] Initializing built-in extension XInputExtension
[     6.901] Initializing built-in extension XTEST
[     6.901] Initializing built-in extension BIG-REQUESTS
[     6.901] Initializing built-in extension SYNC
[     6.901] Initializing built-in extension XKEYBOARD
[     6.901] Initializing built-in extension XC-MISC
[     6.901] Initializing built-in extension SECURITY
[     6.901] Initializing built-in extension XINERAMA
[     6.901] Initializing built-in extension XFIXES
[     6.901] Initializing built-in extension RENDER
[     6.901] Initializing built-in extension RANDR
[     6.901] Initializing built-in extension COMPOSITE
[     6.901] Initializing built-in extension DAMAGE
[     6.901] Initializing built-in extension MIT-SCREEN-SAVER
[     6.901] Initializing built-in extension DOUBLE-BUFFER
[     6.901] Initializing built-in extension RECORD
[     6.901] Initializing built-in extension DPMS
[     6.901] Initializing built-in extension X-Resource
[     6.901] Initializing built-in extension XVideo
[     6.901] Initializing built-in extension XVideo-MotionCompensation
[     6.901] Initializing built-in extension SELinux
[     6.901] Initializing built-in extension XFree86-VidModeExtension
[     6.901] Initializing built-in extension XFree86-DGA
[     6.901] Initializing built-in extension XFree86-DRI
[     6.901] Initializing built-in extension DRI2
[     6.901] (II) "glx" will be loaded by default.
[     6.901] (WW) "xmir" is not to be loaded by default. Skipping.
[     6.901] (II) LoadModule: "dri2"
[     6.901] (II) Module "dri2" already built-in
[     6.901] (II) LoadModule: "glamoregl"
[     6.903] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.964] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.964]    compiled for 1.14.3, module version = 0.5.1
[     6.964]    ABI class: X.Org ANSI C Emulation, version 0.4
[     6.964] (II) LoadModule: "glx"
[     6.964] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     6.993] (II) Module glx: vendor="NVIDIA Corporation"
[     6.993]    compiled for 4.0.2, module version = 1.0.0
[     6.993]    Module class: X.Org Server Extension
[     6.993] (II) NVIDIA GLX Module  319.60  Wed Sep 25 14:24:11 PDT 2013
[     6.993] Loading extension GLX
[     6.993] (==) Matched nvidia as autoconfigured driver 0
[     6.993] (==) Matched nouveau as autoconfigured driver 1
[     6.993] (==) Matched nvidia as autoconfigured driver 2
[     6.993] (==) Matched nouveau as autoconfigured driver 3
[     6.993] (==) Matched nvidia as autoconfigured driver 4
[     6.993] (==) Matched nouveau as autoconfigured driver 5
[     6.993] (==) Matched vesa as autoconfigured driver 6
[     6.993] (==) Matched modesetting as autoconfigured driver 7
[     6.993] (==) Matched fbdev as autoconfigured driver 8
[     6.993] (==) Assigned the driver to the xf86ConfigLayout
[     6.993] (II) LoadModule: "nvidia"
[     6.994] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     7.001] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.001]    compiled for 4.0.2, module version = 1.0.0
[     7.001]    Module class: X.Org Video Driver
[     7.002] (II) LoadModule: "nouveau"
[     7.002] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     7.004] (II) Module nouveau: vendor="X.Org Foundation"
[     7.004]    compiled for 1.14.2.901, module version = 1.0.9
[     7.004]    Module class: X.Org Video Driver
[     7.004]    ABI class: X.Org Video Driver, version 14.1
[     7.004] (II) LoadModule: "vesa"
[     7.004] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     7.005] (II) Module vesa: vendor="X.Org Foundation"
[     7.005]    compiled for 1.14.1, module version = 2.3.2
[     7.005]    Module class: X.Org Video Driver
[     7.005]    ABI class: X.Org Video Driver, version 14.1
[     7.005] (II) LoadModule: "modesetting"
[     7.005] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     7.006] (II) Module modesetting: vendor="X.Org Foundation"
[     7.006]    compiled for 1.14.1, module version = 0.8.0
[     7.006]    Module class: X.Org Video Driver
[     7.006]    ABI class: X.Org Video Driver, version 14.1
[     7.006] (II) LoadModule: "fbdev"
[     7.006] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     7.007] (II) Module fbdev: vendor="X.Org Foundation"
[     7.007]    compiled for 1.14.1, module version = 0.4.3
[     7.007]    Module class: X.Org Video Driver
[     7.007]    ABI class: X.Org Video Driver, version 14.1
[     7.007] (II) NVIDIA dlloader X Driver  319.60  Wed Sep 25 14:04:14 PDT 2013
[     7.007] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     7.007] (II) NOUVEAU driver Date:   Wed Jul 31 10:51:03 2013 +1000
[     7.007] (II) NOUVEAU driver for NVIDIA chipset families :
[     7.007]    RIVA TNT        (NV04)
[     7.007]    RIVA TNT2       (NV05)
[     7.007]    GeForce 256     (NV10)
[     7.007]    GeForce 2       (NV11, NV15)
[     7.007]    GeForce 4MX     (NV17, NV18)
[     7.007]    GeForce 3       (NV20)
[     7.007]    GeForce 4Ti     (NV25, NV28)
[     7.007]    GeForce FX      (NV3x)
[     7.008]    GeForce 6       (NV4x)
[     7.008]    GeForce 7       (G7x)
[     7.008]    GeForce 8       (G8x)
[     7.008]    GeForce GTX 200 (NVA0)
[     7.008]    GeForce GTX 400 (NVC0)
[     7.008] (II) VESA: driver for VESA chipsets: vesa
[     7.008] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     7.008] (II) FBDEV: driver for framebuffer: fbdev
[     7.008] (++) using VT number 7

[     7.021] (II) Loading sub module "fb"
[     7.021] (II) LoadModule: "fb"
[     7.021] (II) Loading /usr/lib/xorg/modules/libfb.so
[     7.022] (II) Module fb: vendor="X.Org Foundation"
[     7.022]    compiled for 1.14.5, module version = 1.0.0
[     7.022]    ABI class: X.Org ANSI C Emulation, version 0.4
[     7.022] (WW) Unresolved symbol: fbGetGCPrivateKey
[     7.022] (II) Loading sub module "wfb"
[     7.022] (II) LoadModule: "wfb"
[     7.022] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     7.024] (II) Module wfb: vendor="X.Org Foundation"
[     7.024]    compiled for 1.14.5, module version = 1.0.0
[     7.024]    ABI class: X.Org ANSI C Emulation, version 0.4
[     7.024] (II) Loading sub module "shadow"
[     7.024] (II) LoadModule: "shadow"
[     7.024] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     7.025] (II) Module shadow: vendor="X.Org Foundation"
[     7.025]    compiled for 1.14.5, module version = 1.1.0
[     7.025]    ABI class: X.Org ANSI C Emulation, version 0.4
[     7.025] (II) Loading sub module "ramdac"
[     7.025] (II) LoadModule: "ramdac"
[     7.025] (II) Module "ramdac" already built-in
[     7.026] (EE) [drm] KMS not enabled
[     7.026] (WW) Falling back to old probe method for vesa
[     7.026] (WW) Falling back to old probe method for modesetting
[     7.026] (WW) Falling back to old probe method for fbdev
[     7.026] (II) Loading sub module "fbdevhw"
[     7.026] (II) LoadModule: "fbdevhw"
[     7.026] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     7.027] (II) Module fbdevhw: vendor="X.Org Foundation"
[     7.027]    compiled for 1.14.5, module version = 0.0.2
[     7.027]    ABI class: X.Org Video Driver, version 14.1
[     7.027] (EE) open /dev/fb0: No such file or directory
[     7.027] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[     7.027] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     7.027] (==) NVIDIA(0): RGB weight 888
[     7.027] (==) NVIDIA(0): Default visual is TrueColor
[     7.027] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.027] (**) NVIDIA(0): Enabling 2D acceleration
[     7.627] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[     7.627] (II) NVIDIA(GPU-0):     3D Vision stereo.
[     7.656] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[     7.656] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[     7.657] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:1:0:0 (GPU-0)
[     7.657] (--) NVIDIA(0): Memory: 1572864 kBytes
[     7.657] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.02
[     7.657] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.659] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 480 at PCI:1:0:0
[     7.659] (--) NVIDIA(0):     LG Electronics W2243 (CRT-0) (boot, connected)
[     7.659] (--) NVIDIA(0):     CRT-1
[     7.659] (--) NVIDIA(0):     DFP-0
[     7.659] (--) NVIDIA(0):     DFP-1
[     7.659] (--) NVIDIA(0):     Ancor Communications Inc ASUS VS247 (DFP-2) (connected)
[     7.659] (--) NVIDIA(0): LG Electronics W2243 (CRT-0): 400.0 MHz maximum pixel clock
[     7.659] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[     7.659] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[     7.659] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[     7.659] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[     7.659] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[     7.659] (--) NVIDIA(0): Ancor Communications Inc ASUS VS247 (DFP-2): 330.0 MHz maximum pixel clock
[     7.659] (--) NVIDIA(0): Ancor Communications Inc ASUS VS247 (DFP-2): Internal Dual Link TMDS
[     7.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.659] (**) NVIDIA(0):     device LG Electronics W2243 (CRT-0) (Using EDID
[     7.659] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[     7.659] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.660] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[     7.660] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[     7.660] (**) NVIDIA(0):     devices.)
[     7.661] (==) NVIDIA(0): 
[     7.661] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     7.661] (==) NVIDIA(0):     will be used as the requested mode.
[     7.661] (==) NVIDIA(0): 
[     7.661] (II) NVIDIA(0): Validated MetaModes:
[     7.661] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select{},DFP-2:nvidia-auto-select{}"
[     7.661] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[     7.681] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[     7.681] (--) NVIDIA(0):     option
[     7.681] (II) UnloadModule: "vesa"
[     7.681] (II) Unloading vesa
[     7.681] (II) UnloadModule: "fbdev"
[     7.681] (II) Unloading fbdev
[     7.681] (II) UnloadSubModule: "fbdevhw"
[     7.681] (II) Unloading fbdevhw
[     7.681] (--) Depth 24 pixmap format is 32 bpp
[     8.500] (II) NVIDIA(GPU-1): Found DRM driver nvidia-drm (20130102)
[     8.571] (II) NVIDIA(GPU-1): Display (AOC LM720/LM720A (CRT-0)) does not support NVIDIA 3D
[     8.571] (II) NVIDIA(GPU-1):     Vision stereo.
[     8.575] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:2:0:0 (GPU-1)
[     8.575] (--) NVIDIA(GPU-1): Memory: 1572864 kBytes
[     8.575] (--) NVIDIA(GPU-1): VideoBIOS: 70.00.21.00.02
[     8.575] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
[     8.575] (--) NVIDIA(GPU-1): Valid display device(s) on GeForce GTX 480 at PCI:2:0:0
[     8.575] (--) NVIDIA(GPU-1):     AOC LM720/LM720A (CRT-0) (boot, connected)
[     8.575] (--) NVIDIA(GPU-1):     CRT-1
[     8.575] (--) NVIDIA(GPU-1):     DFP-0
[     8.575] (--) NVIDIA(GPU-1):     DFP-1
[     8.575] (--) NVIDIA(GPU-1):     DFP-2
[     8.575] (--) NVIDIA(GPU-1): AOC LM720/LM720A (CRT-0): 400.0 MHz maximum pixel clock
[     8.575] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock
[     8.575] (--) NVIDIA(GPU-1): DFP-0: 330.0 MHz maximum pixel clock
[     8.575] (--) NVIDIA(GPU-1): DFP-0: Internal Single Link TMDS
[     8.575] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
[     8.575] (--) NVIDIA(GPU-1): DFP-1: Internal Single Link TMDS
[     8.575] (--) NVIDIA(GPU-1): DFP-2: 330.0 MHz maximum pixel clock
[     8.575] (--) NVIDIA(GPU-1): DFP-2: Internal Single Link TMDS
[     8.575] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[     8.575] (II) NVIDIA:     access.
[     8.579] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select{},DFP-2:nvidia-auto-select{}"
[     8.662] Loading extension NV-GLX
[     8.755] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.755] (==) NVIDIA(0): Backing store disabled
[     8.755] (==) NVIDIA(0): Silken mouse enabled
[     8.755] (==) NVIDIA(0): DPMS enabled
[     8.756] Loading extension NV-CONTROL
[     8.756] Loading extension XINERAMA
[     8.756] (II) Loading sub module "dri2"
[     8.756] (II) LoadModule: "dri2"
[     8.756] (II) Module "dri2" already built-in
[     8.756] (II) NVIDIA(0): [DRI2] Setup complete
[     8.756] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     8.756] (--) RandR disabled
[     8.759] (II) SELinux: Disabled on system
[     8.759] (II) Initializing extension GLX
[     8.771] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     8.776] (II) config/udev: Adding drm device (/dev/dri/card0)
[     8.776] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[   666.012] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[   666.012] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   666.012] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   666.012] (**) NVIDIA(0):     device LG Electronics W2243 (CRT-0) (Using EDID
[   666.012] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   666.043] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[   666.043] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   666.043] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   666.043] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[   666.043] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   666.043] (**) NVIDIA(0):     devices.)
[   666.204] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-3: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[   666.236] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-3: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[   666.345] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[   666.345] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   666.345] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   666.345] (**) NVIDIA(0):     device LG Electronics W2243 (CRT-0) (Using EDID
[   666.345] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   666.376] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[   666.376] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   666.376] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   666.376] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[   666.376] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   666.376] (**) NVIDIA(0):     devices.)
[   667.413] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[   667.413] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   667.413] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   667.413] (**) NVIDIA(0):     device LG Electronics W2243 (CRT-0) (Using EDID
[   667.413] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   667.444] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[   667.444] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   667.444] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   667.444] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[   667.444] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   667.444] (**) NVIDIA(0):     devices.)
[   667.560] (II) XKB: reuse xkmfile /var/lib/xkb/server-7996F6726817F73651B9DE0FDA11E35FC4524568.xkm
[   667.568] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.724] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.727] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.730] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.733] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.736] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.739] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   668.742] (II) XKB: reuse xkmfile /var/lib/xkb/server-14B7503D830F6433941F279130885A2D664E08AA.xkm
[   687.505] (II) NVIDIA(GPU-0): Display (LG Electronics W2243 (CRT-0)) does not support NVIDIA
[   687.505] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   687.505] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   687.505] (**) NVIDIA(0):     device LG Electronics W2243 (CRT-0) (Using EDID
[   687.505] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[   687.536] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS VS247 (DFP-2)) does not
[   687.536] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[   687.536] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   687.536] (**) NVIDIA(0):     device Ancor Communications Inc ASUS VS247 (DFP-2) (Using
[   687.536] (**) NVIDIA(0):     EDID frequencies has been enabled on all display
[   687.536] (**) NVIDIA(0):     devices.)
[  1212.601] (II) evdev: Eee PC WMI hotkeys: Close
[  1212.601] (II) UnloadModule: "evdev"
[  1212.601] (II) evdev: USB USB Keykoard: Close
[  1212.601] (II) UnloadModule: "evdev"
[  1212.601] (II) evdev: USB USB Keykoard: Close
[  1212.601] (II) UnloadModule: "evdev"
[  1212.601] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Close
[  1212.601] (II) UnloadModule: "evdev"
[  1212.601] (II) evdev: Power Button: Close
[  1212.601] (II) UnloadModule: "evdev"
[  1212.601] (II) evdev: Power Button: Close
[  1212.601] (II) UnloadModule: "evdev"
[  1212.860] (EE) Server terminated successfully (0). Closing log file.

Qualquer ajuda seria muito apreciada.

    
por Martin Eve 09.04.2014 / 09:21

2 respostas

3

Martin- Configuração muito semelhante no meu fim, exceto com um par de nvidia GT9800 - por volta de 2008 !. Também um Intel HD4000 a bordo (desativado no BIOS). O xrandr mostrava apenas 1 gpu, embora todas as outras ferramentas relacionadas com o sistema relatassem corretamente ambas. ubuntu 14.04 lts beta 2, nvidia 331.28 proprietária

O cálice do Santo Graal para mim na noite passada foi: Base Mosaic! Empty xorg.conf, nvidia x configurações do servidor- > Ative o Mosaico Base e ative cada exibição detectada. Tudo funciona! rápido multi-gpu, multi-head setup multi-head com 1 xscreen! Meus 3 monitores são resoluções diferentes e um é girado retrato. Até mesmo o ubuntu Settings - Displays mostra corretamente todos os 3 monitores.

Eu sugiro atualizar para os drivers proprietários da nvidia 331.28, explodir o seu xorg.conf e tentar o Mosaic base novamente.

-chad

➜ ~ nvidia-xconfig --query-gpu-info

Number of GPUs: 2
GPU #0:
  Name      : GeForce 9800 GT
  UUID      : GPU-56281125-01c7-ee85-b8b9-b3e5cf94b7c5
  PCI BusID : PCI:1:0:0
  Number of Display Devices: 1
  Display Device 0 (CRT-0):
      EDID Name             : Samsung SyncMaster
      Minimum HorizSync     : 30.000 kHz
      Maximum HorizSync     : 81.000 kHz
      Minimum VertRefresh   : 56 Hz
      Maximum VertRefresh   : 75 Hz
      Maximum PixelClock    : 146.250 MHz
      Maximum Width         : 1680 pixels
      Maximum Height        : 1050 pixels
      Preferred Width       : 1680 pixels
      Preferred Height      : 1050 pixels
      Preferred VertRefresh : 60 Hz
      Physical Width        : 470 mm
      Physical Height       : 300 mm
GPU #1:
  Name      : GeForce 9800 GT
  UUID      : GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d
  PCI BusID : PCI:2:0:0
  Number of Display Devices: 2
  Display Device 0 (CRT-0):
      EDID Name             : Samsung SyncMaster
      Minimum HorizSync     : 30.000 kHz
      Maximum HorizSync     : 81.000 kHz
      Minimum VertRefresh   : 56 Hz
      Maximum VertRefresh   : 75 Hz
      Maximum PixelClock    : 140.000 MHz
      Maximum Width         : 1280 pixels
      Maximum Height        : 1024 pixels
      Preferred Width       : 1440 pixels
      Preferred Height      : 900 pixels
      Preferred VertRefresh : 60 Hz
      Physical Width        : 410 mm
      Physical Height       : 270 mm

  Display Device 1 (DFP-1):
      EDID Name             : Ancor Communications Inc ASUS VH242H
      Minimum HorizSync     : 30.000 kHz
      Maximum HorizSync     : 85.000 kHz
      Minimum VertRefresh   : 55 Hz
      Maximum VertRefresh   : 75 Hz
      Maximum PixelClock    : 160.000 MHz
      Maximum Width         : 1920 pixels
      Maximum Height        : 1080 pixels
      Preferred Width       : 1920 pixels
      Preferred Height      : 1080 pixels
      Preferred VertRefresh : 60 Hz
      Physical Width        : 520 mm
      Physical Height       : 290 mm

Abaixo está meu xorg.conf - Todos os quais foram gerados x configurações do servidor. Note que é bastante simples e nem sequer menciona a minha segunda GPU.

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 331.20  (buildd@roseapple)  Mon Feb  3 15:07:22 UTC 2014

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9800 GT"
    BusID          "PCI:1:0:0"
EndSection

Section "Screen"

auto-select +3600+0 {rotation=right}, GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d.GPU-1.DVI-I-3: nvidia-auto-select +1680+180"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "GPU-56281125-01c7-ee85-b8b9-b3e5cf94b7c5.GPU-0.DVI-I-0: nvidia-auto-select +0+180, GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d.GPU-1.DVI-I-0: nvidia-auto-select +3600+0 {rotation=right}, GPU-cbc59e3f-e8c1-a347-a069-b62f6b885f7d.GPU-1.DVI-I-3: nvidia-auto-select +1680+180"
    Option         "MultiGPU" "Off"
    Option         "SLI" "off"
    Option         "BaseMosaic" "on"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
    
por 14.04.2014 / 20:39
0

Esse tópico me ajudou muito, mas havia muito mais etapas do que as descritas na resposta, então pensei em deixar um comentário com as etapas detalhadas que funcionaram para mim.

  1. Use o aplicativo “Driver Manager” em “System Settings” para selecionar “nvidia-346” como o driver (não “nvidia-346-updates”). Clique em "Aplicar alterações". Uma vez que o aplicativo estiver pronto, nada acontecerá (nada será instalado, nenhum prompt aparecerá, nenhuma mensagem será mostrada). Reinicie o computador (isso é necessário porque o driver da NVIDIA modifica o kernel aparentemente e somente uma reinicialização total do sistema fará com que a instalação seja executada).
  2. Quando o Linux Mint for iniciado após a reinicialização, o Cinnamon será quebrado e somente dois de seus monitores funcionarão. Não se preocupe em tentar consertar o Cinnamon, isso apenas o levará a um caminho de instalações inúteis.
  3. Inicie o aplicativo "Terminal". Isso será complicado quando o Cinnamon está quebrado porque “Terminal” está misteriosamente ausente da lista de Aplicativos na barra de tarefas! E clicar com o botão direito na área de trabalho também é quebrado. A única maneira que encontrei para iniciá-lo é usar o atalho criado na Etapa 1 ou usar o atalho de teclado Alt + F2. Quando uma janela aparece solicitando que você digite um comando para executar - use "sudo ls" e marque a caixa de seleção "Use Terminal". Quando um terminal é iniciado, use o atalho de teclado Ctrl + Shift + T para abrir uma nova guia de terminal. Agora você pode fechar a aba original que está aguardando sua senha sudo. (Você precisará fazer isso sempre que quiser iniciar uma nova janela de terminal).
  4. No terminal, execute estes comandos:

    sudo apt-add-repository ppa:xorg-edgers 
    sudo apt-get update
    sudo apt-get upgrade
    sudo apt-get install nvidia-346 nvidia-settings
    sudo apt-get --purge remove xserver-xorg-video-nouveau
    sudo apt-get autoremove
    
  5. Reinicialize seu computador. Não há um botão de interface do usuário para fazer isso, então você precisará executar sudo reboot .

  6. Quando o computador for reinicializado, as coisas ainda serão quebradas. Eu não tenho certeza sobre os passos 7 e 8. Eles podem não ser necessários, mas eu fiz isso ao tentar descobrir o que está errado, então incluí-los aqui apenas no caso.

  7. Em seguida, execute sudo gedit /etc/default/grub . No editor, encontre a linha que define GRUB_CMDLINE_LINUX_DEFAULT e altere para:

    GRUB_CMDLINE_LINUX_DEFAULT="nomodeset"
    
  8. Agora, no Terminal, execute isto:

    sudo update-initramfs -u
    sudo update-grub2
    sudo update-grub
    
  9. Agora use sudo gedit /etc/X11/xorg.conf para editar seu arquivo X Config. Essa etapa é uma droga, porque não há uma GUI legal para editar esse arquivo de configuração, e se você cometer um erro e corromper esse arquivo - da próxima vez que reiniciar - você não terá mais GUI e nem mesmo um console funcional. Faça um backup desse arquivo primeiro. Uma vez feito o backup, você geralmente deve seguir as instruções descritas aqui: link Para mim as alterações que fiz foram:

    • Certifique-se de que a seção "ServerLayout" apenas defina a Tela 0. Não deve haver linhas definindo "Tela 1". Se você tem essa linha - remova-a.
    • Na seção "Tela", verifique se:
      • O MultiGPU está desativado
      • o SLI está ativado
      • SLIMosaic é verdadeiro
      • O BaseMosaic é verdadeiro
  10. Reinicie uma última vez. Quando você voltar, Cinnamon deve estar funcionando novamente e todos os seus 3 monitores estarão funcionando novamente. Agora você pode usar a GUI de configurações da NVIDIA para configurar resoluções e posições de tela / rotações, etc ...

Espero que isso ajude.

    
por 29.08.2015 / 08:04