Estou tendo problemas para instalar novos pacotes no Ubuntu por causa do python.
Eu tentei sudo apt-get install python3 python3-dev , mas estou obtendo a seguinte saída ::
dpkg: error processing python-lockfile (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: error processing python-gi (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: error processing python-apt (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
Setting up python-six (1.3.0-1) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-six (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: error processing python-chardet (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: dependency problems prevent configuration of python-debian:
python-debian depends on python-six; however:
Package python-six is not configured yet.
python-debian depends on python-chardet; however:
Package python-chardet is not configured yet.'
dpkg: error processing python-debian (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of update-notifier-common:
update-notifier-common depends on python-apt (>= 0.6.12); however:
Package python-apt is not configured yet.
update-notifier-common depends on python-debian; however:
Package python-debian is not configured yet.'
dpkg: error processing update-notifier-common (--configure):
dependency problems - leaving unconfigured
Setting up python-sip (4.15.2-1ubuntu1) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-sip (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of python-qt4:
python-qt4 depends on sip-api-10.1; however:
Package sip-api-10.1 is not installed.
Package python-sip which provides sip-api-10.1 is not configured yet.'
dpkg: error processing python-qt4 (--configure):
dependency problems - leaving unconfigured
dpkg: error processing python-dbus (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: dependency problems prevent configuration of python-qt4-dbus:
python-qt4-dbus depends on python-dbus (>= 0.84.0-2~); however:
Package python-dbus is not configured yet.'
dpkg: error processing python-qt4-dbus (--configure):
dependency problems - leaving unconfigured
dpkg: error processing python-dirspec (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: error processing python-httplib2 (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: error processing python-crypto (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: dependency problems prevent configuration of python-oauthlib:
python-oauthlib depends on python-crypto; however:
Package python-crypto is not configured yet.'
dpkg: error processing python-oauthlib (--configure):
dependency problems - leaving unconfigured
Setting up python-openssl (0.13-2ubuntu4) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-openssl (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up python-pkg-resources (0.6.37-1ubuntu1) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing ubuntu-sso-client-qt (--configure):
dependency problems - leaving unconfigured
Setting up python-problem-report (2.12.5-0ubuntu2.2) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-problem-report (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: error processing python-keyring (--configure):
Package is in a very bad inconsistent state - you should
reinstall it before attempting configuration.
dpkg: error processing python-lazr.uri (--configure):
dependency problems - leaving unconfigured
Setting up python-simplejson (3.3.0-2ubuntu2) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-simplejson (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up python-oauth (1.0.1-3build1) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-oauth (--configure):
subprocess installed post-installation script returned error exit status 1
(gconftool-2:20627): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Traceback (most recent call last):
File "/usr/sbin/gconf-schemas", line 121, in <module>
trim(os.path.join(defaults_dest,"%gconf-tree.xml"), get_valid_languages())
File "/usr/sbin/gconf-schemas", line 18, in get_valid_languages
langs.add(l.split('_')[0])
TypeError: Type str doesnt support the buffer API
dpkg: error processing gconf2 (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of aisleriot:
Setting up python-xapian (1.2.15-4) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-xapian (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up python-xdg (0.25-3) ...
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error processing python-xdg (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: error processing python-configglue (--configure):
dependency problems - leaving unconfigured
dpkg: too many errors, stopping
Errors were encountered while processing:
python-lockfile
duplicity
deja-dup
python-gi
python-apt
python-six
python-chardet
python-debian
update-notifier-common
python-sip
python-qt4
python-dbus
python-qt4-dbus
python-dirspec
python-httplib2
python-crypto
python-oauthlib
python-openssl
python-pkg-resources
python-zope.interface
python-twisted-core
python-twisted-web
python-ubuntu-sso-client
ubuntu-sso-client
ubuntu-sso-client-qt
python-problem-report
python-keyring
python-lazr.uri
python-simplejson
python-wadllib
python-oauth
python-lazr.restfulclient
python-launchpadlib
python-apport
python3-distupgrade
python3-update-manager
ubuntu-release-upgrader-core
update-manager-core
gconf2
aisleriot
gnome-terminal-data
gnome-terminal
python-xapian
apt-xapian-index
apturl-common
apturl
compiz-gnome
compiz
deja-dup-backend-gvfs
python-xdg
python-configglue
Processing was halted because there were too many errors.'
Eu tentei quase tudo que posso encontrar através do google. Eu estou usando python 2.7.5. Eu fiz apt-get clean e apt-get autoclean e todas as variações desse tema.
Eu realmente quero poder instalar python-dev . Como posso fazer isso acontecer? Neste ponto, estou disposto a considerar opções extremas, quaisquer que sejam, além de formatar o sistema.
Saída para sudo apt-get install --reinstall python-lockfile
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
280 not fully installed or removed.
Need to get 0 B/5,207 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ... 209306 files and directories currently installed.)
Preparing to replace python-lockfile 1:0.8-2ubuntu1 (using .../python-lockfile_1%3a0.8-2ubuntu1_all.deb) ...
File "/usr/bin/pyclean", line 63
except (IOError, OSError), e:
^
SyntaxError: invalid syntax
dpkg: warning: subprocess old pre-removal script returned error exit status 1
dpkg: trying script from the new package instead ...
File "/usr/bin/pyclean", line 63
except (IOError, OSError), e:
^
SyntaxError: invalid syntax
dpkg: error processing /var/cache/apt/archives/python-lockfile_1%3a0.8-2ubuntu1_all.deb (--unpack):
subprocess new pre-removal script returned error exit status 1
Traceback (most recent call last):
File "/usr/bin/pycompile", line 35, in <module>
from debpython.version import SUPPORTED, debsorted, vrepr, \
File "/usr/share/python/debpython/version.py", line 24, in <module>
from ConfigParser import SafeConfigParser
ImportError: No module named ConfigParser
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/python-lockfile_1%3a0.8-2ubuntu1_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Saída para apt-cache policy python-lockfile
python-lockfile:
Installed: 1:0.8-2ubuntu1
Candidate: 1:0.8-2ubuntu1
Version table:
*** 1:0.8-2ubuntu1 0
500 http://us.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages
100 /var/lib/dpkg/status
python-minimal:
Installed: 2.7.5-5ubuntu1
Candidate: 2.7.5-5ubuntu1
Version table:
*** 2.7.5-5ubuntu1 0
500 http://us.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages
100 /var/lib/dpkg/status
Editar 5
Saída para - > sudo dpkg -C --- > link (Desculpe, o limite de palavras chegou a ser postado neste arquivo.)
Editar - 6
Obrigado pela sua paciência e ajuda.
Após as sugestões, ainda estou recebendo erros meus resultados são:
sudo dpkg --configure -a -> http://goo.gl/uab19E
sudo apt-get install -f -> http://goo.gl/wUZXgY
Saída para sudo apt-get --reinstall instale o ubuntu-release-upgrader-gtk
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
108 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
E: Internal Error, No file name for ubuntu-release-upgrader-gtk:amd64
Eu tive um problema muito parecido. Parece vir do uso de python3 em vez de python2.7
Eu tinha o /usr/bin/python ligado ao python3 (mudei o link depois de instalar o python3 para maior conveniência, parece que o aliasing é uma idéia muito melhor).
De qualquer forma, depois de desvinculá-lo e vinculá-lo a python2.7 upgrade funcionou bem.
The following packages are in a mess due to serious problems during
installation. They must be reinstalled for them (and any packages
that depend on them) to function properly:
python-lxml pythonic binding for the libxml2 and libxslt libraries
python-aptdaemon Python 2 module for the server and client of aptdaemon
python3-uno Python-UNO bridge
python-dbus simple interprocess messaging system (Python interface)
python-defer Small framework for asynchronous programming (Python 2)
python-gi Python 2.x bindings for gobject-introspection libraries
python3-speechd Python interface to Speech Dispatcher
python3-xdg Python 3 library to access freedesktop.org standards
python-aptdaemon.gtk3widgets Python 2 GTK+ 3 widgets to run an aptdaemon clien
python3-requests elegant and simple HTTP library for Python3, built for hu
python-lazr.uri library for parsing, manipulating, and generating URIs
python3-crypto cryptographic algorithms and protocols for Python 3
python3-louis Python bindings for liblouis
python-cairo Python bindings for the Cairo vector graphics library
python-keyring store and access your passwords safely
python-gobject-2 deprecated static Python bindings for the GObject library
python3-chardet universal encoding detector
python3-lxml pythonic binding for the libxml2 and libxslt libraries
python3-cairo Python 3 bindings for the Cairo vector graphics library
python-gtk2 Python bindings for the GTK+ widget set
python3-dirspec Python User Folders Specification Library
python-chardet universal character encoding detector
python-cupshelpers Python modules for printer configuration with CUPS
dh-python Debian helper tools for packaging Python libraries and ap
python-crypto cryptographic algorithms and protocols for Python
python-dirspec Python User Folders Specification Library
python3-six Python 2 and 3 compatibility library (Python 3 interface)
python-lockfile file locking library for Python
python-apt Python interface to libapt-pkg
python3-oauthlib generic, spec-compliant implementation of OAuth for Pytho
python3-xkit library for the manipulation of xorg.conf files (Python 3
python-httplib2 comprehensive HTTP client library written for Python
python-debian Python modules to work with Debian-related data formats
python3-urllib3 HTTP library with thread-safe connection pooling for Pyth
python-lazr.restfulclient client for lazr.restful-based web services
python-configglue Glues together optparse.OptionParser and ConfigParser.Con
python-launchpadlib Launchpad web services client library
Portanto, a mensagem é clara, você deve reinstalar todos os pacotes e depois reconfigurar todo o resto:
sudo apt-get --reinstall install python-lxml python-aptdaemon python3-uno python-dbus python-defer python-gi python3-speechd python3-xdg python-aptdaemon.gtk3widgets python3-requests python-lazr.uri python3-crypto python3-louis python-cairo python-keyring python-gobject-2 python3-chardet python3-lxml python3-cairo python-gtk2 python3-dirspec python-chardet python-cupshelpers dh-python python-crypto python-dirspec python3-six python-lockfile python-apt python3-oauthlib python3-xkit python-httplib2 python-debian python3-urllib3 python-lazr.restfulclient python-configglue python-launchpadlib
Em seguida, configure / reconfigure todos os pacotes:
sudo dpkg --configure -a
sudo apt-get install -f
Ah, também recomendo que você atualize para fiel, para poder usar a versão mais recente de todos os pacotes.