Resolução de problemas do SFTP on Raspberry Pi

4

Estou tentando criar uma pasta compartilhada com o SFTP no meu Raspi. Existem alguns problemas, que são relatados como relacionados aos direitos de administração da pasta. Tentar resolvê-los parece inútil. Estou relatando tudo para que você possa imitar o problema.

Em /etc/ssh/sshd_config eu coloquei: onde o grupo nas contém o usuário nasaccess

SubSystem nas internal-sftp
Match Group nas
    ChrootDirectory %h
    ForceCommand internal-sftp
    AllowTcpForwarding no

então

sudo groupadd nas
sudo gpasswd -a nasaccess nas

e fazendo o chrooting:

sudo chown root:nasaccess /home/nasaccess
sudo chmod 750 /home/nasaccess 

e adicionou uma pasta dentro:

sudo mkdir /home/nasaccess/files
sudo chown nasaccess: /home/nasaccess/files
sudo chmod 750 /home/nasaccess/files

reiniciou o serviço ssh, quando conectei com nasaccess, recebi:

Write failed: Broken pipe                                                                                               
Couldn't read packet: Connection reset by peer

Os usuários que não pertencem ao nas têm acesso total ao SFTP, como esperado. Por quê? A busca de solução de problemas encontrada aleatoriamente parece agora funcionar.

O modo de vorbose fornece isso:

sudo sftp -vvv nasaccess@localhost
OpenSSH_6.0p1 Debian-4+deb7u2, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_rsa-cert type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: identity file /root/.ssh/id_dsa-cert type -1
debug1: identity file /root/.ssh/id_ecdsa type -1
debug1: identity file /root/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debia                 n-4+deb7u2
debug1: match: OpenSSH_6.0p1 Debian-4+deb7u2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.0p1 Debian-4+deb7u2
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "localhost" from file "/root/.ss                 h/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@open                 ssh.com,[email protected],ecdsa-sha2-nistp521-cert-v01@op                 enssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp                 521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diff                 ie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],ecdsa-sha2-n                 [email protected],[email protected],ecdsa-sha2                 -nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],s                 [email protected],[email protected],ssh-dss-cert-v00@openss                 h.com,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12                 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij                 [email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12                 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij                 [email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,                 hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op                 enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,                 hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op                 enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp                 521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diff                 ie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12                 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij                 [email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour12                 8,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij                 [email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,                 hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op                 enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,                 hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@op                 enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ECDSA 50:ed:ea:a5:d5:7a:5a:f0:ab:09:d6:e4:e4:e9:7c:d3
debug3: load_hostkeys: loading entries for host "localhost" from file "/root/.ss                 h/known_hosts"
debug3: load_hostkeys: found key type ECDSA in file /root/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'localhost' is known and matches the ECDSA host key.
debug1: Found key in /root/.ssh/known_hosts:1
debug1: ssh_ecdsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug2: key: /root/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,pa                 ssword
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug1: Trying private key: /root/.ssh/id_ecdsa
debug3: no such identity: /root/.ssh/id_ecdsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
nasaccess@localhost's password:
debug3: packet_send2: adding 48 (len 63 padlen 17 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to localhost ([127.0.0.1]:22).
debug2: fd 4 setting O_NONBLOCK
debug3: fd 5 is O_NONBLOCK
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
Write failed: Broken pipe
Couldn't read packet: Connection reset by peer
    
por thexeno 07.07.2015 / 23:32

1 resposta

2

Sua sintaxe para a palavra-chave Subsystem está errada. Tente isso:

Subsystem internal-sftp

Match Group nas
    ChrootDirectory %h
    ForceCommand internal-sftp
    AllowTcpForwarding no

Se você der uma olhada em /var/log/auth.log no seu servidor (sim, eu sei que é localhost no seu caso), você verá mensagens como esta:

Jul  7 22:46:24 localhost sshd[30701]: Accepted publickey for jsmith from 192.168.56.1 port 61983 ssh2: RSA 86:87:b7:08:15:5e:a4:7b:32:ba:c8:fa:84:89:45:4c
Jul  7 22:46:24 localhost sshd[30701]: pam_unix(sshd:session): session opened for user jsmith by (uid=0)
Jul  7 22:46:25 localhost sshd[30706]: subsystem request for sftp by user jsmith failed, subsystem not found
Jul  7 22:46:25 localhost sshd[30701]: pam_unix(sshd:session): session closed for user jsmith

A chave aqui é a penúltima linha, solicitação do subsistema para sftp pelo usuário jsmith falhou, subsistema não encontrado , que indica algo errado com o comando do subsistema. Examinar a página man do sshd_config poderia levá-lo à sintaxe correta.

    
por 07.07.2015 / 23:51

Tags