ProvisioningError instalando o Samba

3

Estou tentando instalar o samba, mas ele falha:

kavinlu@kavinlu-IT:/etc/init.d$ sudo apt-get -f install samba4
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  libdcerpc-server0 libdcerpc0 libgensec0 libregistry0 libsamba-policy0 python-samba samba4-common-bin
Suggested packages:
  bind9 phpldapadmin samba-gtk swat2
Recommended packages:
  samba4-dsdb-modules
The following NEW packages will be installed:
  libdcerpc-server0 libdcerpc0 libgensec0 libregistry0 libsamba-policy0 python-samba samba4 samba4-common-bin
0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/4,143 kB of archives.
After this operation, 23.2 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Preconfiguring packages ...
Selecting previously deselected package libgensec0.
(Reading database ... 207432 files and directories currently installed.)
Unpacking libgensec0 (from .../libgensec0_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libdcerpc0.
Unpacking libdcerpc0 (from .../libdcerpc0_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libregistry0.
Unpacking libregistry0 (from .../libregistry0_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libdcerpc-server0.
Unpacking libdcerpc-server0 (from .../libdcerpc-server0_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package libsamba-policy0.
Unpacking libsamba-policy0 (from .../libsamba-policy0_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package python-samba.
Unpacking python-samba (from .../python-samba_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package samba4-common-bin.
Unpacking samba4-common-bin (from .../samba4-common-bin_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Selecting previously deselected package samba4.
Unpacking samba4 (from .../samba4_4.0.0~alpha17~git20110807.dfsg1-1ubuntu1_amd64.deb) ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up libgensec0 (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up libdcerpc0 (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up libregistry0 (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up libdcerpc-server0 (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up libsamba-policy0 (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up python-samba (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up samba4-common-bin (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Setting up samba4 (4.0.0~alpha17~git20110807.dfsg1-1ubuntu1) ...
Administrator password will be set randomly!
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
Unknown parameter encountered: "passdb backend"
Ignoring unknown parameter "passdb backend"
Unknown parameter encountered: "unix password sync"
Ignoring unknown parameter "unix password sync"
Unknown parameter encountered: "passwd program"
Ignoring unknown parameter "passwd program"
Unknown parameter encountered: "pam password change"
Ignoring unknown parameter "pam password change"
Unknown parameter encountered: "map to guest"
Ignoring unknown parameter "map to guest"
Unknown parameter encountered: "usershare allow guests"
Ignoring unknown parameter "usershare allow guests"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "max log size"
Ignoring unknown parameter "max log size"
Unknown parameter encountered: "syslog"
Ignoring unknown parameter "syslog"
Unknown parameter encountered: "passdb backend"
Ignoring unknown parameter "passdb backend"
Unknown parameter encountered: "unix password sync"
Ignoring unknown parameter "unix password sync"
Unknown parameter encountered: "passwd program"
Ignoring unknown parameter "passwd program"
Unknown parameter encountered: "pam password change"
Ignoring unknown parameter "pam password change"
Unknown parameter encountered: "map to guest"
Ignoring unknown parameter "map to guest"
Unknown parameter encountered: "usershare allow guests"
Ignoring unknown parameter "usershare allow guests"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
Unknown parameter encountered: "guest ok"
Ignoring unknown parameter "guest ok"
ProvisioningError: guess_names: 'realm =' was not specified in supplied /etc/samba/smb.conf.  Please remove the smb.conf file and let provision generate it
dpkg: error processing samba4 (--configure):
 subprocess installed post-installation script returned error exit status 1
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for python-support ...
Errors were encountered while processing:
 samba4
E: Sub-process /usr/bin/dpkg returned an error code (1)

O que está errado? Como faço para corrigir isso?

    
por Kavin Lu 29.12.2011 / 05:54

3 respostas

2

Eu resolvi o problema desta maneira:

  1. Use este smb.conf :

    # Global parameters
    [global]
        workgroup = One
        realm = One
        netbios name = Klaptop11-10
        security = share
    
  2. Instale o pacote samba-dsdb-modules . Para lidar com dependências, instale todas juntas: samba-common samba-common-bin samba-dsdb-modules samba4 samba4-clients samba4-common-bin

Todos os meus pacotes relacionados ao samba estão listados aqui, apenas no caso:

$ dpkg -l | grep smb

ii  **libpam-smbpass**                         2:3.5.11~dfsg-1ubuntu2.1                 pluggable authentication module for Samba
ii  **libsmbclient**                           2:3.5.11~dfsg-1ubuntu2.1                 shared library for communication with SMB/CIFS servers
ii  **python-smbc**                            1.0.10-0ubuntu2                          Python bindings for Samba clients (libsmbclient)

$ dpkg -l | grep samba

ii  **libsamba-hostconfig0**                   4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 Samba host configuration library
ii  **libsamba-policy0**                       4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 Samba policy management
ii  **libsamba-util0**                         4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 Samba utility function library
ii  **python-samba**                           4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 Python bindings for Samba
ii  **samba-common**                           2:3.5.11~dfsg-1ubuntu2.1                 common files used by both the Samba server and client
ii  **samba-common-bin**                       2:3.5.11~dfsg-1ubuntu2.1                 common files used by both the Samba server and client
ii  **samba-dsdb-modules**                     4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 Samba Directory Services Database
ii  **samba4**                                 4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 SMB/CIFS file, NT domain and active directory server (version 4)
ii  **samba4-clients**                         4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 client utilities from Samba 4
ii  **samba4-common-bin**                      4.0.0~alpha17~git20110807.dfsg1-1ubuntu1 Samba 4 common files used by both the server and the client
    
por 10.04.2012 / 04:28
1

Este é um bug conhecido no pacote samba4 - veja link

Se você não precisa da funcionalidade do Active Directory DC, eu recomendaria instalar o samba 3 (a versão estável) e remover o samba 4. O Samba 3 está no pacote "samba", não no pacote "samba4".

    
por 29.12.2011 / 16:53
0

o erro real é > > link < <

Mas corrigi-o removendo a referência ao controlador de domínio e adicionando uma linha para segurança, além de tornar o grupo de trabalho e o reino iguais (no meu caso, ambos são chamados de "Um" (sem aspas)

Portanto, o começo de meus basebones smb.conf é assim:

    # Global parameters
[global]
    workgroup = One
    realm = One
    netbios name = Klaptop11-10
    security = share

Não faço ideia se isso é certo em termos de uso do samba, mas eu ia configurá-lo depois, de qualquer forma, tudo o que eu queria inicialmente era parar de errar constantemente. O que isso fez.

    
por 02.01.2012 / 08:32

Tags