Por favor ative contrib e non-free em /etc/apt/sources.list, instale firmware-realtek e reinicie.
Estou tentando fazer meu wifi funcionar no Debian Sid recém-instalado (amd64, kernel 3.10.11-1). A linha relevante da saída de lspci é:
06:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
e este cartão wi-fi não é reconhecido:
# iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
caso você precise, aqui está a saída da rede lshw -c:
*-network NON-RÉCLAMÉ
description: Network controller
produit: RTL8188CE 802.11b/g/n WiFi Adapter
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:06:00.0
version: 01
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress cap_list
configuration: latency=0
ressources: portE/S:3000(taille=256) mémoire:f1d00000-f1d03fff
Então eu procurei on-line para encontrar o driver que eu deveria instalar. Descobri que eu deveria ir para esta página e instale o driver rtl8192ce. Eu baixei e extraí e segui as instruções do arquivo readme . Eu mudei para super usuário e tentei compilar o driver da fonte de código com make . Aqui está a saída:
# make
make -C /lib/modules/3.10-3-amd64/build M=/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013 modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-3.10-3-amd64 »
CC [M] /home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.o
In file included from /home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.c:39:0:
/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/pci.h:247:15: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtl_pci_probe’
int __devinit rtl_pci_probe(struct pci_dev *pdev,
^
/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.c: In function ‘rtl_action_proc’:
/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.c:885:32: error: ‘struct ieee80211_conf’ has no member named ‘channel’
rx_status.freq = hw->conf.channel->center_freq;
^
/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.c:886:32: error: ‘struct ieee80211_conf’ has no member named ‘channel’
rx_status.band = hw->conf.channel->band;
^
/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.c: In function ‘rtl_send_smps_action’:
/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.c:1451:24: error: ‘struct ieee80211_conf’ has no member named ‘channel’
info->band = hw->conf.channel->band;
^
make[4]: *** [/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013/base.o] Erreur 1
make[3]: *** [_module_/home/damien/Downloads/rtl_92ce_92se_92de_8723ae_88ee_linux_mac80211_0012.0207.2013] Erreur 2
make[2]: *** [sub-make] Erreur 2
make[1]: *** [all] Erreur 2
make[1]: quittant le répertoire « /usr/src/linux-headers-3.10-3-amd64 »
make: *** [all] Erreur 2
Parece que o erro vem do código-fonte e não da falta de biblioteca ou algo assim.
Alguma ideia do que devo tentar fazer em seguida, ou como devo tentar resolver este erro de compilação?