temperatura AMD Ryzen 2600 [fechada]

Question

Eu instalei o módulo it87 e aqui está minha sensors output

asus-isa-0000
Adapter: ISA adapter
cpu_fan:        0 RPM

it8665-isa-0290
Adapter: ISA adapter
in0:          +0.65 V  (min =  +1.12 V, max =  +1.11 V)  ALARM
in1:          +2.52 V  (min =  +2.14 V, max =  +0.42 V)  ALARM
in2:          +2.04 V  (min =  +1.64 V, max =  +0.13 V)  ALARM
in3:          +1.98 V  (min =  +2.77 V, max =  +1.47 V)  ALARM
in4:          +0.03 V  (min =  +0.60 V, max =  +1.61 V)  ALARM
in5:          +0.03 V  (min =  +1.26 V, max =  +1.70 V)  ALARM
in6:          +0.03 V  (min =  +1.59 V, max =  +1.54 V)  ALARM
3VSB:         +3.38 V  (min =  +1.24 V, max =  +2.90 V)  ALARM
Vbat:         +3.29 V  
+3.3V:        +3.38 V  
fan1:         972 RPM  (min =  463 RPM)
fan2:        1005 RPM  (min =   13 RPM)
fan3:         981 RPM  (min =   11 RPM)
fan4:           0 RPM  (min =   -1 RPM)
fan6:           0 RPM  (min =   -1 RPM)
temp1:        +26.0°C  (low  = +117.0°C, high = +87.0°C)
temp2:        +26.0°C  (low  = -31.0°C, high = +99.0°C)  sensor = thermistor
temp3:        +29.0°C  (low  = +55.0°C, high = -67.0°C)  ALARM  sensor = thermistor
temp4:        +29.0°C  (low  = +44.0°C, high =  +1.0°C)  ALARM  sensor = thermistor
temp5:        +29.0°C  (low  = -119.0°C, high = +67.0°C)  sensor = thermistor
temp6:        +29.0°C  (low  = -118.0°C, high = -11.0°C)  ALARM  sensor = thermistor
intrusion0:  ALARM

nouveau-pci-0600
Adapter: PCI adapter
GPU core:     +0.91 V  (min =  +0.80 V, max =  +1.19 V)
temp1:        +37.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +75.8°C  (high = +70.0°C)

Eu quero saber o que é esse valor responsável por

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +75.8°C  (high = +70.0°C)

    

Answer 1

Este é o driver de um sensor térmico em processadores de chips da família AMD. Se você executar sensors-detect , verá algo como

Driver 'k10temp' (built-in):
  * Chip 'AMD Family 15h thermal sensors' (confidence: 9)

e lspci -v retornam qual dispositivo usa esse driver:

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b3
        Flags: fast devsel
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp

Você pode ler a documentação completa deste driver em "/usr/src/linux-$(uname -r)/Documentation/hwmon/k10temp" , em particular uma lista de chips suportados:

• AMD Family 10h processors: Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below) Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below) Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II Socket S1G3: Athlon II, Sempron, Turion II
• AMD Family 11h processors: Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
• AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
• AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
• AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
• AMD Family 16h processors: "Kabini", "Mullins"