Você tem o pacote libgl1-mesa-glx instalado? Tem certeza de que você tem apenas um adaptador gráfico Intel dentro do seu PC? Caso contrário, pode ser um conflito entre o driver proprietário nouveau e nvidia que você tentou usar.
Então esta é uma história de eu ser burro. Eu tenho um desktop usado do trabalho e queria colocar debian nele.Eu fiz e então eu queria instalar o Steam.I fez isso. Agora aqui é onde a parte muda começa. Eu tive esse modelo exato de desktop antes e que tinha uma placa gráfica nvidea. Eu assumi que isso era o mesmo. Eu instalei o driver e tentei inicializar. Eu tenho "extensão gleng opengl não suportada por este visor". Eu fiquei desconfiada e abri meu desktop. Não foi nvidia. Não foi nada. Apenas o intel integrado.eu tentei desinstalar o nvidia um. Sem sorte. Então, minha pergunta é: Como faço para consertar isso, então o vapor será executado pelo menos até eu comprar uma placa gráfica?
Aqui está o meu xorg.0.log
[ 17.089]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 17.089] X Protocol Version 11, Revision 0
[ 17.089] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 17.089] Current Operating System: Linux Astral 3.16.0-4-686-pae
#1 SMP Debian 3.16.7-ckt11-1 (2015-05-24) i686
[ 17.089] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=51d8ed27-5f54-4d84-9e51-301b32001e1d ro quiet
[ 17.089] Build Date: 11 February 2015 01:14:26AM
[ 17.089] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 17.089] Current version of pixman: 0.32.6
[ 17.089] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.089] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.090] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 6 23:26:30 2015
[ 17.145] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.169] (==) No Layout section. Using the first Screen section.
[ 17.169] (==) No screen section available. Using defaults.
[ 17.169] (**) |-->Screen "Default Screen Section" (0)
[ 17.169] (**) | |-->Monitor "<default monitor>"
[ 17.188] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 17.188] (==) Automatically adding devices
[ 17.188] (==) Automatically enabling devices
[ 17.188] (==) Automatically adding GPU devices
[ 17.238] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 17.238] Entry deleted from font path.
[ 17.263] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 17.263] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.263] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.263] (II) Loader magic: 0xb7746700
[ 17.263] (II) Module ABI versions:
[ 17.263] X.Org ANSI C Emulation: 0.4
[ 17.263] X.Org Video Driver: 18.0
[ 17.263] X.Org XInput driver : 21.0
[ 17.263] X.Org Server Extension : 8.0
[ 17.264] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.265] (--) PCI:*(0:0:2:0) 8086:29c2:1028:0220 rev 2, Mem @ 0xdfe00000/524288, 0xc0000000/268435456, 0xdff00000/1048576, I/O @ 0x0000ecd8/8
[ 17.265] (--) PCI: (0:0:2:1) 8086:29c3:1028:0220 rev 2, Mem @ 0xdfe80000/524288
[ 17.265] (II) LoadModule: "glx"
[ 17.317] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 18.444] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.444] compiled for 4.0.2, module version = 1.0.0
[ 18.444] Module class: X.Org Server Extension
[ 18.444] (II) NVIDIA GLX Module 340.65 Tue Dec 2 09:02:32 PST 2014
[ 18.444] (==) Matched intel as autoconfigured driver 0
[ 18.444] (==) Matched intel as autoconfigured driver 1
[ 18.444] (==) Matched modesetting as autoconfigured driver 2
[ 18.444] (==) Matched fbdev as autoconfigured driver 3
[ 18.444] (==) Matched vesa as autoconfigured driver 4
[ 18.444] (==) Assigned the driver to the xf86ConfigLayout
[ 18.444] (II) LoadModule: "intel"
[ 18.457] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.508] (II) Module intel: vendor="X.Org Foundation"
[ 18.508] compiled for 1.15.99.904, module version = 2.21.15
[ 18.508] Module class: X.Org Video Driver
[ 18.508] ABI class: X.Org Video Driver, version 18.0
[ 18.508] (II) LoadModule: "modesetting"
[ 18.509] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.519] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.519] compiled for 1.15.99.904, module version = 0.9.0
[ 18.519] Module class: X.Org Video Driver
[ 18.519] ABI class: X.Org Video Driver, version 18.0
[ 18.519] (II) LoadModule: "fbdev"
[ 18.519] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.520] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.520] compiled for 1.15.99.904, module version = 0.4.4
[ 18.520] Module class: X.Org Video Driver
[ 18.520] ABI class: X.Org Video Driver, version 18.0
[ 18.520] (II) LoadModule: "vesa"
[ 18.520] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.526] (II) Module vesa: vendor="X.Org Foundation"
[ 18.526] compiled for 1.15.99.904, module version = 2.3.3
[ 18.526] Module class: X.Org Video Driver
[ 18.526] ABI class: X.Org Video Driver, version 18.0
[ 18.526] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 18.535] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.535] (II) FBDEV: driver for framebuffer: fbdev
[ 18.535] (II) VESA: driver for VESA chipsets: vesa
[ 18.535] (++) using VT number 7
[ 18.547] (WW) Falling back to old probe method for modesetting
[ 18.547] (WW) Falling back to old probe method for fbdev
[ 18.547] (II) Loading sub module "fbdevhw"
[ 18.547] (II) LoadModule: "fbdevhw"
[ 18.548] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.555] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.555] compiled for 1.16.4, module version = 0.0.2
[ 18.555] ABI class: X.Org Video Driver, version 18.0
[ 18.555] (WW) Falling back to old probe method for vesa
[ 18.555] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.555] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.555] (==) intel(0): RGB weight 888
[ 18.555] (==) intel(0): Default visual is TrueColor
[ 18.555] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33
[ 18.555] (**) intel(0): Relaxed fencing enabled
[ 18.555] (**) intel(0): Wait on SwapBuffers? enabled
[ 18.555] (**) intel(0): Triple buffering? enabled
[ 18.555] (**) intel(0): Framebuffer tiled
[ 18.555] (**) intel(0): Pixmaps tiled
[ 18.555] (**) intel(0): 3D buffers tiled
[ 18.555] (**) intel(0): SwapBuffers wait enabled
[ 18.555] (==) intel(0): video overlay key set to 0x101fe
[ 18.644] (II) intel(0): Output VGA1 has no monitor section
[ 18.744] (II) intel(0): EDID for output VGA1
[ 18.744] (II) intel(0): Manufacturer: DEL Model: a028 Serial#: 809776712
[ 18.744] (II) intel(0): Year: 2007 Week: 50
[ 18.744] (II) intel(0): EDID Version: 1.3
[ 18.744] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 18.744] (II) intel(0): Sync: Separate
[ 18.744] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 18.744] (II) intel(0): Gamma: 2.20
[ 18.744] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 18.744] (II) intel(0): Default color space is primary color space
[ 18.744] (II) intel(0): First detailed timing is preferred mode
[ 18.744] (II) intel(0): redX: 0.640 redY: 0.340 greenX: 0.279 greenY: 0.619
[ 18.744] (II) intel(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 18.744] (II) intel(0): Supported established timings:
[ 18.744] (II) intel(0): 720x400@70Hz
[ 18.744] (II) intel(0): 640x480@60Hz
[ 18.744] (II) intel(0): 640x480@75Hz
[ 18.744] (II) intel(0): 800x600@60Hz
[ 18.744] (II) intel(0): 800x600@75Hz
[ 18.744] (II) intel(0): 1024x768@60Hz
[ 18.744] (II) intel(0): 1024x768@75Hz
[ 18.744] (II) intel(0): 1280x1024@75Hz
[ 18.744] (II) intel(0): Manufacturer's mask: 0
[ 18.744] (II) intel(0): Supported standard timings:
[ 18.744] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 18.744] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 18.744] (II) intel(0): Supported detailed timing:
[ 18.744] (II) intel(0): clock: 108.0 MHz Image Size: 380 x 305 mm
[ 18.744] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 18.744] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 18.744] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 18.744] (II) intel(0): Serial No: CN0787CA0D6H
[ 18.744] (II) intel(0): Monitor name: DELL E198FP
[ 18.744] (II) intel(0): EDID (in hex):
[ 18.744] (II) intel(0): 00ffffffffffff0010ac28a048364430
[ 18.744] (II) intel(0): 3211010368261e78eecaf6a357479e23
[ 18.744] (II) intel(0): 114f54a54b00714f8180010101010101
[ 18.744] (II) intel(0): 010101010101302a009851002a403070
[ 18.744] (II) intel(0): 13007c311100001e000000fd00384b1f
[ 18.744] (II) intel(0): 500e000a202020202020000000ff0043
[ 18.744] (II) intel(0): 4e303738374341304436480a000000fc
[ 18.744] (II) intel(0): 0044454c4c204531393846500a200037
[ 18.744] (II) intel(0): Printing probed modes for output VGA1
[ 18.744] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 18.744] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 18.744] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 18.744] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 18.744] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.744] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 18.744] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.744] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 18.744] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.744] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.744] (II) intel(0): Output VGA1 connected
[ 18.744] (II) intel(0): Using exact sizes for initial modes
[ 18.744] (II) intel(0): Output VGA1 using initial mode 1280x1024
[ 18.744] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.744] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.745] (==) intel(0): DPI set to (96, 96)
[ 18.745] (II) Loading sub module "fb"
[ 18.745] (II) LoadModule: "fb"
[ 18.745] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.753] (II) Module fb: vendor="X.Org Foundation"
[ 18.754] compiled for 1.16.4, module version = 1.0.0
[ 18.754] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.754] (II) Loading sub module "dri2"
[ 18.754] (II) LoadModule: "dri2"
[ 18.754] (II) Module "dri2" already built-in
[ 18.754] (II) UnloadModule: "modesetting"
[ 18.754] (II) Unloading modesetting
[ 18.754] (II) UnloadModule: "fbdev"
[ 18.754] (II) Unloading fbdev
[ 18.754] (II) UnloadSubModule: "fbdevhw"
[ 18.754] (II) Unloading fbdevhw
[ 18.754] (II) UnloadModule: "vesa"
[ 18.754] (II) Unloading vesa
[ 18.754] (==) Depth 24 pixmap format is 32 bpp
[ 18.763] (II) intel(0): [DRI2] Setup complete
[ 18.763] (II) intel(0): [DRI2] DRI driver: i915
[ 18.763] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled
[ 18.774] (II) UXA(0): Driver registered support for the following operations:
[ 18.774] (II) solid
[ 18.774] (II) copy
[ 18.774] (II) composite (RENDER acceleration)
[ 18.774] (II) put_image
[ 18.774] (II) get_image
[ 18.774] (==) intel(0): Backing store enabled
[ 18.775] (==) intel(0): Silken mouse enabled
[ 18.775] (II) intel(0): Initializing HW Cursor
[ 18.775] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.776] (==) intel(0): DPMS enabled
[ 18.776] (==) intel(0): Intel XvMC decoder disabled
[ 18.776] (II) intel(0): Set up textured video
[ 18.776] (II) intel(0): Set up overlay video
[ 18.776] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.776] (==) intel(0): hotplug detection: "enabled"
[ 18.792] (--) RandR disabled
[ 18.805] (II) SELinux: Disabled on system
[ 18.817] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 18.817] (II) intel(0): Setting screen physical size to 338 x 270
[ 19.041] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.041] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.041] (II) LoadModule: "evdev"
[ 19.041] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.065] (II) Module evdev: vendor="X.Org Foundation"
[ 19.065] compiled for 1.16.0, module version = 2.9.0
[ 19.065] Module class: X.Org XInput Driver
[ 19.065] ABI class: X.Org XInput driver, version 21.0
[ 19.065] (II) Using input driver 'evdev' for 'Power Button'
[ 19.065] (**) Power Button: always reports core events
[ 19.065] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 19.065] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.065] (--) evdev: Power Button: Found keys
[ 19.065] (II) evdev: Power Button: Configuring as keyboard
[ 19.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 19.065] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.065] (**) Option "xkb_rules" "evdev"
[ 19.065] (**) Option "xkb_model" "pc105"
[ 19.065] (**) Option "xkb_layout" "us"
[ 19.065] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 19.065] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.065] (II) Using input driver 'evdev' for 'Power Button'
[ 19.065] (**) Power Button: always reports core events
[ 19.065] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 19.065] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.065] (--) evdev: Power Button: Found keys
[ 19.065] (II) evdev: Power Button: Configuring as keyboard
[ 19.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[ 19.066] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 19.066] (**) Option "xkb_rules" "evdev"
[ 19.066] (**) Option "xkb_model" "pc105"
[ 19.066] (**) Option "xkb_layout" "us"
[ 19.066] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 19.066] (II) No input driver specified, ignoring this device.
[ 19.066] (II) This device may have been added with another device file.
[ 19.066] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 19.066] (II) No input driver specified, ignoring this device.
[ 19.066] (II) This device may have been added with another device file.
[ 19.067] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event8)
[ 19.067] (II) No input driver specified, ignoring this device.
[ 19.067] (II) This device may have been added with another device file.
[ 19.067] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[ 19.067] (II) No input driver specified, ignoring this device.
[ 19.067] (II) This device may have been added with another device file.
[ 19.067] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event6)
[ 19.067] (II) No input driver specified, ignoring this device.
[ 19.067] (II) This device may have been added with another device file.
[ 19.068] (II) config/udev: Adding input device DELL DELL USB Laser Mouse (/dev/input/event0)
[ 19.068] (**) DELL DELL USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 19.068] (II) Using input driver 'evdev' for 'DELL DELL USB Laser Mouse'
[ 19.068] (**) DELL DELL USB Laser Mouse: always reports core events
[ 19.068] (**) evdev: DELL DELL USB Laser Mouse: Device: "/dev/input/event0"
[ 19.068] (--) evdev: DELL DELL USB Laser Mouse: Vendor 0x46d Product 0xc063
[ 19.068] (--) evdev: DELL DELL USB Laser Mouse: Found 12 mouse buttons
[ 19.068] (--) evdev: DELL DELL USB Laser Mouse: Found scroll wheel(s)
[ 19.068] (--) evdev: DELL DELL USB Laser Mouse: Found relative axes
[ 19.068] (--) evdev: DELL DELL USB Laser Mouse: Found x and y relative axes
[ 19.068] (II) evdev: DELL DELL USB Laser Mouse: Configuring as mouse
[ 19.068] (II) evdev: DELL DELL USB Laser Mouse: Adding scrollwheel support
[ 19.068] (**) evdev: DELL DELL USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 19.068] (**) evdev: DELL DELL USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C063.0001/input/input2/event0"
[ 19.068] (II) XINPUT: Adding extended input device "DELL DELL USB Laser Mouse" (type: MOUSE, id 8)
[ 19.068] (II) evdev: DELL DELL USB Laser Mouse: initialized for relative axes.
[ 19.068] (**) DELL DELL USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 19.068] (**) DELL DELL USB Laser Mouse: (accel) acceleration profile 0
[ 19.068] (**) DELL DELL USB Laser Mouse: (accel) acceleration factor: 2.000
[ 19.068] (**) DELL DELL USB Laser Mouse: (accel) acceleration threshold: 4
[ 19.068] (II) config/udev: Adding input device DELL DELL USB Laser Mouse (/dev/input/mouse0)
[ 19.068] (II) No input driver specified, ignoring this device.
[ 19.068] (II) This device may have been added with another device file.
[ 19.069] (II) config/udev: Adding input device Microsoft Wired Keyboard 400 (/dev/input/event1)
[ 19.069] (**) Microsoft Wired Keyboard 400: Applying InputClass "evdev keyboard catchall"
[ 19.069] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 400'
[ 19.069] (**) Microsoft Wired Keyboard 400: always reports core events
[ 19.069] (**) evdev: Microsoft Wired Keyboard 400: Device: "/dev/input/event1"
[ 19.069] (--) evdev: Microsoft Wired Keyboard 400: Vendor 0x45e Product 0x752
[ 19.069] (--) evdev: Microsoft Wired Keyboard 400: Found keys
[ 19.069] (II) evdev: Microsoft Wired Keyboard 400: Configuring as keyboard
[ 19.069] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:045E:0752.0002/input/input3/event1"
[ 19.069] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 400" (type: KEYBOARD, id 9)
[ 19.069] (**) Option "xkb_rules" "evdev"
[ 19.069] (**) Option "xkb_model" "pc105"
[ 19.069] (**) Option "xkb_layout" "us"
[ 19.069] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 19.069] (II) No input driver specified, ignoring this device.
[ 19.069] (II) This device may have been added with another device file.
[ 44.456] (II) intel(0): EDID vendor "DEL", prod id 41000
[ 44.456] (II) intel(0): Using EDID range info for horizontal sync
[ 44.456] (II) intel(0): Using EDID range info for vertical refresh
[ 44.456] (II) intel(0): Printing DDC gathered Modelines:
[ 44.456] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 44.456] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.456] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.456] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.456] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.456] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.456] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.456] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.456] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.456] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.556] (II) intel(0): EDID vendor "DEL", prod id 41000
[ 44.556] (II) intel(0): Using hsync ranges from config file
[ 44.556] (II) intel(0): Using vrefresh ranges from config file
[ 44.556] (II) intel(0): Printing DDC gathered Modelines:
[ 44.556] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 44.556] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.556] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.556] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.556] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.556] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.556] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.556] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.556] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.556] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.724] (II) intel(0): EDID vendor "DEL", prod id 41000
[ 44.724] (II) intel(0): Using hsync ranges from config file
[ 44.724] (II) intel(0): Using vrefresh ranges from config file
[ 44.724] (II) intel(0): Printing DDC gathered Modelines:
[ 44.724] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 44.724] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
Eu não consegui colocar todo o log do Xorg lá. muito grande. Eu posso postar em outro lugar, se as partes realmente necessárias. Se você precisar de mais alguma coisa, é só pedir. Sou um pouco novo no Linux, mas quero aprender.
Você tem o pacote libgl1-mesa-glx instalado? Tem certeza de que você tem apenas um adaptador gráfico Intel dentro do seu PC? Caso contrário, pode ser um conflito entre o driver proprietário nouveau e nvidia que você tentou usar.