Estou tentando ligar a interface ppp0 (PPTP VPN) como interface 'externa' no servidor proxy (Tinyproxy). Infelizmente isso não funciona.
Usando route add -net default gw 10.9.0.1 Eu posso fazer todo o tráfego ir via VPN, mas isso não é o que eu quero.
Minhas rotas depois que o ppp0 está ativo:
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
10.9.0.1 * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 216-18-212-218. 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0
ifconfig:
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::21d:60ff:fe25:7ad6 prefixlen 64 scopeid 0x20<link>
ether 00:1d:60:25:7a:d6 txqueuelen 1000 (Ethernet)
RX packets 47533 bytes 31947804 (30.4 MiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 44946 bytes 6618945 (6.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 13167 bytes 1604741 (1.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13167 bytes 1604741 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496
inet 10.9.34.125 netmask 255.255.255.255 destination 10.9.0.1
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 1088 bytes 568896 (555.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1328 bytes 167081 (163.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Preciso adicionar outra rota específica? Outro servidor proxy? Qual IP externo do Tinyproxy 'deve ser ligado (eu tentei ambos gw e peer)?