Estou tentando executar o sensor-detect no Debian6 64 bits e fico:
Sorry, no sensors were detected. Either your system has no sensors, or they are not supported, or they are connected to an I2C or SMBus adapter that is not supported.
O applet de sensores está funcionando corretamente, bem como a CPU do sensor
root@debian:/# dmesg | grep -i error
[ 0.558964] ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
[ 7.537292] PM: Error -22 checking image file
[ 9.581500] nouveau: probe of 0000:01:00.0 failed with error -22
root@debian:/# lspci
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5)
00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation Device 1244 (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0bee (rev a1)
03:00.0 USB Controller: Device 1b21:1042
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
05:00.0 PCI bridge: Device 1b21:1080 (rev 01)
Eu só recebo os seguintes sensores:
root@debian:/# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +99.0°C)
temp2: +29.8°C (crit = +99.0°C)
Com este script proposto (http://dl.lm-sensors.org/lm-sensors/files/sensors-detect) Parece que os sensores detectam muito mais, eu reinicio o Debian, ou começo o sensor lm de serviço e eu recebo a mesma saída nos sensores