minha tela sensível ao toque do Samsung Galaxy Book é detectada pelo Ubuntu, mas o Axis está invertido. Eu tentei calibrar com xinput e xinput_calibrator e, em seguida, tentei inverter os eixos com coordenadas diferentes (0,1; 0,0) com "Evdev Axis Inversion", mas não parece que Evdev funciona com a minha tela sensível ao toque. Eu realmente não sei como proceder e apreciaria qualquer ajuda.
De baixo, eu introduzo a seção final em um arquivo 99-calibration.conf, mas não vejo nenhum efeito. Também tentei alterar os zeros para uns no SwapXY neste arquivo, mas não vi nenhum efeito:
$ xinput_calibrator
Calibrating standard Xorg driver "STMD1234:00 06CB:1058"
current calibration values: min_x=0, max_x=65535 and min_y=0, max_y=65535
If these values are estimated wrong, either supply it manually with the --precalib option, or run the 'get_precalib.sh' script to automatically get it (through HAL).
--> Making the calibration permanent <--
copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's)
Section "InputClass"
Identifier "calibration"
MatchProduct "STMD1234:00 06CB:1058"
Option "MinX" "65359"
Option "MaxX" "-267"
Option "MinY" "63845"
Option "MaxY" "-666"
Option "SwapXY" "0" # unless it was already set to 1
Option "InvertX" "0" # unless it was already set
Option "InvertY" "0" # unless it was already set
EndSection
Lista de propósitos:
$ xinput --list-props 12
Device 'STMD1234:00 06CB:1058':
Device Enabled (137): 1
Coordinate Transformation Matrix (139): 0.000000, -1.000000, 1.000000, 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Calibration Matrix (309): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Calibration Matrix Default (310): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Send Events Modes Available (257): 1, 0
libinput Send Events Mode Enabled (258): 0, 0
libinput Send Events Mode Enabled Default (259): 0, 0
Device Node (260): "/dev/input/event7"
Device Product ID (261): 1739, 4184
Xorg.0.log:
[ 9.311] (==) No Layout section. Using the first Screen section.
[ 9.312] (==) No screen section available. Using defaults.
[ 9.312] (**) |-->Screen "Default Screen Section" (0)
[ 9.312] (**) | |-->Monitor "<default monitor>"
[ 9.317] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
...
[ 9.495] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.495] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 9.495] (==) modeset(0): RGB weight 888
[ 9.495] (==) modeset(0): Default visual is TrueColor
[ 9.495] (II) Loading sub module "glamoregl"
[ 9.495] (II) LoadModule: "glamoregl"
[ 9.495] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 9.568] (II) Module glamoregl: vendor="X.Org Foundation"
[ 9.568] compiled for 1.19.3, module version = 1.0.0
[ 9.568] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.568] (II) glamor: OpenGL accelerated X.org driver based.
[ 10.057] (II) glamor: EGL version 1.4 (DRI2):
[ 10.105] (II) modeset(0): glamor initialized
[ 10.106] (II) modeset(0): Output eDP-1 has no monitor section
[ 10.108] (II) modeset(0): Output DP-1 has no monitor section
[ 10.109] (II) modeset(0): EDID for output eDP-1
[ 10.109] (II) modeset(0): Printing probed modes for output eDP-1
[ 10.109] (II) modeset(0): Modeline "1280x1920"x60.0 181.56 1280 1340 1364 1441 1920 1935 1937 2100 -hsync -vsync (126.0 kHz P)
[ 10.109] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 10.109] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 10.109] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 10.109] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 10.109] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 10.109] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 10.109] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 10.109] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 10.109] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 10.109] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 10.109] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 10.109] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 10.109] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 10.109] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 10.109] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 10.109] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 10.109] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 10.109] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 10.109] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 10.109] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 10.109] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 10.109] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 10.111] (II) modeset(0): EDID for output DP-1
[ 10.111] (II) modeset(0): Output eDP-1 connected
[ 10.111] (II) modeset(0): Output DP-1 disconnected
[ 10.111] (II) modeset(0): Using exact sizes for initial modes
[ 10.111] (II) modeset(0): Output eDP-1 using initial mode 1280x1920 +0+0
[ 10.111] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.111] (==) modeset(0): DPI set to (96, 96)
[ 10.111] (II) Loading sub module "fb"
[ 10.111] (II) LoadModule: "fb"
[ 10.111] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.111] (II) Module fb: vendor="X.Org Foundation"
[ 10.111] compiled for 1.19.3, module version = 1.0.0
[ 10.111] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.111] (II) UnloadModule: "fbdev"
[ 10.111] (II) Unloading fbdev
[ 10.111] (II) UnloadSubModule: "fbdevhw"
[ 10.111] (II) Unloading fbdevhw
[ 10.112] (II) UnloadModule: "vesa"
[ 10.112] (II) Unloading vesa
[ 10.112] (==) Depth 24 pixmap format is 32 bpp
[ 10.260] (==) modeset(0): Backing store enabled
[ 10.260] (==) modeset(0): Silken mouse enabled
[ 10.265] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10.270] (==) modeset(0): DPMS enabled
[ 10.270] (II) modeset(0): [DRI2] Setup complete
[ 10.270] (II) modeset(0): [DRI2] DRI driver: i965
[ 10.270] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 10.270] (--) RandR disabled
[ 10.276] (II) SELinux: Disabled on system
[ 10.282] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 10.282] (II) AIGLX: enabled GLX_ARB_create_context
[ 10.282] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 10.282] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 10.282] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 10.282] (II) AIGLX: enabled GLX_SGI_swap_control
[ 10.282] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 10.282] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 10.282] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 10.282] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 10.282] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 10.282] (II) AIGLX: Loaded and initialized i965
[ 10.282] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10.293] (II) modeset(0): Damage tracking initialized
[ 10.293] (II) modeset(0): Setting screen physical size to 338 x 508
[ 10.423] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 10.423] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 10.423] (II) LoadModule: "libinput"
[ 10.423] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 10.459] (II) Module libinput: vendor="X.Org Foundation"
[ 10.459] compiled for 1.19.3, module version = 0.25.0
[ 10.459] Module class: X.Org XInput Driver
[ 10.459] ABI class: X.Org XInput driver, version 24.1
[ 10.459] (II) Using input driver 'libinput' for 'Video Bus'
[ 10.459] (**) Video Bus: always reports core events
[ 10.459] (**) Option "Device" "/dev/input/event2"
[ 10.459] (**) Option "_source" "server/udev"
[ 10.459] (II) input device 'Video Bus', /dev/input/event2 is tagged by udev as: Keyboard
[ 10.459] (II) input device 'Video Bus', /dev/input/event2 is a keyboard
[ 10.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 10.472] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 10.472] (**) Option "xkb_model" "pc105"
[ 10.472] (**) Option "xkb_layout" "us"
[ 10.472] (II) input device 'Video Bus', /dev/input/event2 is tagged by udev as: Keyboard
[ 10.472] (II) input device 'Video Bus', /dev/input/event2 is a keyboard
[ 10.472] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 10.472] (II) No input driver specified, ignoring this device.
[ 10.472] (II) This device may have been added with another device file.
[ 10.473] (II) config/udev: Adding input device HID 04e8:a00a Touchpad (/dev/input/event6)
[ 10.473] (**) HID 04e8:a00a Touchpad: Applying InputClass "libinput touchpad catchall"
[ 10.473] (**) HID 04e8:a00a Touchpad: Applying InputClass "touchpad catchall"
[ 10.473] (**) HID 04e8:a00a Touchpad: Applying InputClass "Default clickpad buttons"
[ 10.473] (II) LoadModule: "synaptics"
[ 10.473] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10.473] (II) Module synaptics: vendor="X.Org Foundation"
[ 10.473] compiled for 1.19.3, module version = 1.9.0
[ 10.473] Module class: X.Org XInput Driver
[ 10.473] ABI class: X.Org XInput driver, version 24.1
[ 10.473] (II) Using input driver 'synaptics' for 'HID 04e8:a00a Touchpad'
[ 10.473] (**) HID 04e8:a00a Touchpad: always reports core events
[ 10.473] (**) Option "Device" "/dev/input/event6"
[ 10.624] (II) synaptics: HID 04e8:a00a Touchpad: found clickpad property
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: x-axis range 0 - 1015 (res 12)
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: y-axis range 0 - 473 (res 12)
[ 10.624] (II) synaptics: HID 04e8:a00a Touchpad: device does not report pressure, will use touch data.
[ 10.624] (II) synaptics: HID 04e8:a00a Touchpad: device does not report finger width.
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: buttons: left double triple
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: Vendor 0x4e8 Product 0xa00a
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: invalid pressure range. defaulting to 0 - 255
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: invalid finger width range. defaulting to 0 - 15
[ 10.624] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: touchpad found
[ 10.624] (**) HID 04e8:a00a Touchpad: always reports core events
[ 10.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:04E8:A00A.0001/input/input7/event6"
[ 10.656] (II) XINPUT: Adding extended input device "HID 04e8:a00a Touchpad" (type: TOUCHPAD, id 7)
[ 10.656] (**) synaptics: HID 04e8:a00a Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 10.656] (**) synaptics: HID 04e8:a00a Touchpad: (accel) MaxSpeed is now 1.75
[ 10.656] (**) synaptics: HID 04e8:a00a Touchpad: (accel) AccelFactor is now 0.179
[ 10.656] (**) HID 04e8:a00a Touchpad: (accel) keeping acceleration scheme 1
[ 10.656] (**) HID 04e8:a00a Touchpad: (accel) acceleration profile 1
[ 10.656] (**) HID 04e8:a00a Touchpad: (accel) acceleration factor: 2.000
[ 10.656] (**) HID 04e8:a00a Touchpad: (accel) acceleration threshold: 4
[ 10.716] (--) synaptics: HID 04e8:a00a Touchpad: touchpad found
[ 10.716] (II) config/udev: Adding input device HID 04e8:a00a Touchpad (/dev/input/mouse0)
[ 10.716] (**) HID 04e8:a00a Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10.716] (II) config/udev: Adding input device HID 04e8:a00a (/dev/input/event3)
[ 10.716] (**) HID 04e8:a00a: Applying InputClass "libinput keyboard catchall"
[ 10.716] (II) Using input driver 'libinput' for 'HID 04e8:a00a'
[ 10.716] (**) HID 04e8:a00a: always reports core events
[ 10.716] (**) Option "Device" "/dev/input/event3"
[ 10.716] (**) Option "_source" "server/udev"
[ 10.717] (II) input device 'HID 04e8:a00a', /dev/input/event3 is tagged by udev as: Keyboard
[ 10.717] (II) input device 'HID 04e8:a00a', /dev/input/event3 is a keyboard
[ 10.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:04E8:A00A.0002/input/input3/event3"
[ 10.732] (II) XINPUT: Adding extended input device "HID 04e8:a00a" (type: KEYBOARD, id 8)
[ 10.732] (**) Option "xkb_model" "pc105"
[ 10.732] (**) Option "xkb_layout" "us"
[ 10.732] (II) input device 'HID 04e8:a00a', /dev/input/event3 is tagged by udev as: Keyboard
[ 10.732] (II) input device 'HID 04e8:a00a', /dev/input/event3 is a keyboard
[ 10.732] (II) config/udev: Adding input device HID 04e8:a00a (/dev/input/event4)
[ 10.732] (**) HID 04e8:a00a: Applying InputClass "libinput keyboard catchall"
[ 10.732] (II) Using input driver 'libinput' for 'HID 04e8:a00a'
[ 10.732] (**) HID 04e8:a00a: always reports core events
[ 10.732] (**) Option "Device" "/dev/input/event4"
[ 10.732] (**) Option "_source" "server/udev"
[ 10.733] (II) input device 'HID 04e8:a00a', /dev/input/event4 is tagged by udev as: Keyboard
[ 10.733] (II) input device 'HID 04e8:a00a', /dev/input/event4 is a keyboard
[ 10.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:04E8:A00A.0003/input/input4/event4"
[ 10.756] (II) XINPUT: Adding extended input device "HID 04e8:a00a" (type: KEYBOARD, id 9)
[ 10.756] (**) Option "xkb_model" "pc105"
[ 10.756] (**) Option "xkb_layout" "us"
[ 10.756] (II) input device 'HID 04e8:a00a', /dev/input/event4 is tagged by udev as: Keyboard
[ 10.756] (II) input device 'HID 04e8:a00a', /dev/input/event4 is a keyboard
[ 10.756] (II) config/udev: Adding input device WCOM0028:00 2D1F:000C (/dev/input/event8)
[ 10.756] (**) WCOM0028:00 2D1F:000C: Applying InputClass "libinput pointer catchall"
[ 10.756] (**) WCOM0028:00 2D1F:000C: Applying InputClass "libinput tablet catchall"
[ 10.756] (II) Using input driver 'libinput' for 'WCOM0028:00 2D1F:000C'
[ 10.756] (**) WCOM0028:00 2D1F:000C: always reports core events
[ 10.756] (**) Option "Device" "/dev/input/event8"
[ 10.756] (**) Option "_source" "server/udev"
[ 10.864] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is tagged by udev as: Mouse Tablet
[ 10.877] (II) WCOM0028:00 2D1F:000C: tablet unknown to libwacom
[ 10.877] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is a tablet
[ 10.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.3/i2c-8/i2c-WCOM0028:00/0018:2D1F:000C.0005/input/input17/event8"
[ 10.928] (II) XINPUT: Adding extended input device "WCOM0028:00 2D1F:000C" (type: TABLET, id 10)
[ 10.929] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is tagged by udev as: Mouse Tablet
[ 10.933] (II) WCOM0028:00 2D1F:000C: tablet unknown to libwacom
[ 10.933] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is a tablet
[ 10.934] (II) config/udev: Adding input device WCOM0028:00 2D1F:000C (/dev/input/mouse2)
[ 10.934] (II) No input driver specified, ignoring this device.
[ 10.934] (II) This device may have been added with another device file.
[ 10.934] (II) config/udev: Adding input device Intel Virtual Button driver (/dev/input/event5)
[ 10.934] (**) Intel Virtual Button driver: Applying InputClass "libinput keyboard catchall"
[ 10.934] (II) Using input driver 'libinput' for 'Intel Virtual Button driver'
[ 10.934] (**) Intel Virtual Button driver: always reports core events
[ 10.934] (**) Option "Device" "/dev/input/event5"
[ 10.934] (**) Option "_source" "server/udev"
[ 10.934] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is tagged by udev as: Keyboard
[ 10.934] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is a keyboard
[ 10.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input5/event5"
[ 10.960] (II) XINPUT: Adding extended input device "Intel Virtual Button driver" (type: KEYBOARD, id 11)
[ 10.960] (**) Option "xkb_model" "pc105"
[ 10.960] (**) Option "xkb_layout" "us"
[ 10.960] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is tagged by udev as: Keyboard
[ 10.960] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is a keyboard
[ 10.960] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 10.960] (II) No input driver specified, ignoring this device.
[ 10.960] (II) This device may have been added with another device file.
[ 10.960] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 10.960] (II) No input driver specified, ignoring this device.
[ 10.960] (II) This device may have been added with another device file.
[ 10.960] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 10.961] (II) No input driver specified, ignoring this device.
[ 10.961] (II) This device may have been added with another device file.
[ 10.961] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 10.961] (II) No input driver specified, ignoring this device.
[ 10.961] (II) This device may have been added with another device file.
[ 10.961] (II) config/udev: Adding input device STMD1234:00 06CB:1058 (/dev/input/event7)
[ 10.961] (**) STMD1234:00 06CB:1058: Applying InputClass "libinput touchscreen catchall"
[ 10.961] (**) STMD1234:00 06CB:1058: Applying InputClass "calibration"
[ 10.961] (II) Using input driver 'libinput' for 'STMD1234:00 06CB:1058'
[ 10.961] (**) STMD1234:00 06CB:1058: always reports core events
[ 10.961] (**) Option "Device" "/dev/input/event7"
[ 10.961] (**) Option "_source" "server/udev"
[ 10.963] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is tagged by udev as: Touchscreen
[ 10.963] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is a touch device
[ 10.992] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3446:00/i2c_designware.0/i2c-5/i2c-STMD1234:00/0018:06CB:1058.0004/input/input12/event7"
[ 10.992] (II) XINPUT: Adding extended input device "STMD1234:00 06CB:1058" (type: TOUCHSCREEN, id 12)
[ 10.992] (**) Option "AccelerationScheme" "none"
[ 10.992] (**) STMD1234:00 06CB:1058: (accel) selected scheme none/0
[ 10.992] (**) STMD1234:00 06CB:1058: (accel) acceleration factor: 2.000
[ 10.992] (**) STMD1234:00 06CB:1058: (accel) acceleration threshold: 4
[ 10.994] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is tagged by udev as: Touchscreen
[ 10.994] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is a touch device
[ 10.994] (II) config/udev: Adding input device STMD1234:00 06CB:1058 (/dev/input/mouse1)
[ 10.994] (**) STMD1234:00 06CB:1058: Applying InputClass "calibration"
[ 10.994] (II) No input driver specified, ignoring this device.
[ 10.994] (II) This device may have been added with another device file.
[ 10.994] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 10.994] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 10.994] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 10.994] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.994] (**) Option "Device" "/dev/input/event1"
[ 10.994] (**) Option "_source" "server/udev"
[ 10.994] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[ 10.994] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is a keyboard
[ 11.008] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[ 11.008] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 11.008] (**) Option "xkb_model" "pc105"
[ 11.008] (**) Option "xkb_layout" "us"
[ 11.008] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[ 11.008] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is a keyboard
[ 18.638] (II) modeset(0): Allocate new frame buffer 1920x1280 stride
[ 993.389] (II) libinput: WCOM0028:00 2D1F:000C: needs a virtual subdevice
[ 993.389] (**) WCOM0028:00 2D1F:000C Pen (0): Applying InputClass "libinput pointer catchall"
[ 993.389] (**) WCOM0028:00 2D1F:000C Pen (0): Applying InputClass "libinput tablet catchall"
[ 993.389] (II) Using input driver 'libinput' for 'WCOM0028:00 2D1F:000C Pen (0)'
[ 993.389] (**) WCOM0028:00 2D1F:000C Pen (0): always reports core events
[ 993.390] (**) Option "Device" "/dev/input/event8"
[ 993.390] (**) Option "_source" "_driver/libinput"
[ 993.390] (II) libinput: WCOM0028:00 2D1F:000C Pen (0): is a virtual subdevice
[ 993.390] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.3/i2c-8/i2c-WCOM0028:00/0018:2D1F:000C.0005/input/input17/event8"
[ 993.390] (II) XINPUT: Adding extended input device "WCOM0028:00 2D1F:000C Pen (0)" (type: STYLUS, id 14)
[ 993.390] (**) Option "AccelerationScheme" "none"
[ 993.390] (**) WCOM0028:00 2D1F:000C Pen (0): (accel) selected scheme none/0
[ 993.390] (**) WCOM0028:00 2D1F:000C Pen (0): (accel) acceleration factor: 2.000
[ 993.390] (**) WCOM0028:00 2D1F:000C Pen (0): (accel) acceleration threshold: 4
meu xinput list-props é diferente, talvez tente isto:
Coordinate Transformation Matrix (121): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
tirado do meu:
$ dmesg | grep -i samsung
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. Galaxy Book 12/SM-W720NTKBXAR, BIOS P02HAC.004.170626.WY.1442 06/26/2017
Tags xorg samsung x11 xinput touch-screen