RTL8723BE: Wifi sempre desinfectando e não pode se conectar novamente e deve ser reiniciado para se conectar

1

Estou frustrado com meu novo laptop, o Wifi funciona bem e pode detectar sinal wifi em torno dele.

O problema é quando eu conectei ao meu wifi apenas 1-2 minutos, o wifi será desconectado e quando eu tento conectar novamente, o wifi não liga.

Depois de reiniciar o laptop, tudo funciona como de costume novamente, eu posso conectar e novamente apenas 1-2 minutos wi-fi será desconectado.

Eu tentei o kali linux, ubuntu, opensuse ainda é o mesmo. Agora, meu laptop está usando o sistema operacional elementar e o adaptador de rede sem fio Realtek RTL8723BE PCIe

test@test:~$ inxi -Fxz
System:    Host: hmvoc9 Kernel: 4.8.0-52-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Gnome  (Gtk 3.18.9-1ubuntu3.3) Distro: elementary 0.4.1 loki
Machine:   System: LENOVO (portable) product: 80KY v: Lenovo G40-80
           Mobo: LENOVO model: Lenovo G40-80 v: NO DPK Bios: LENOVO v: B0CN80WW date: 05/18/2015
CPU:       Dual core Intel Core i3-4030U (-HT-MCP-) cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7581
           clock speeds: max: 1800 MHz 1: 799 MHz 2: 799 MHz 3: 809 MHz 4: 830 MHz
Graphics:  Card-1: Intel Haswell-ULT Integrated Graphics Controller bus-ID: 00:02.0
           Card-2: Advanced Micro Devices [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330]
           bus-ID: 04:00.0
           Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: [email protected]
           GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card-1 Intel 8 Series HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0
           Sound: Advanced Linux Sound Architecture v: k4.8.0-52-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: 5000 bus-ID: 02:00.0
           IF: enp2s0 state: down mac: <filter>
           Card-2: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be bus-ID: 03:00.0
           IF: wlp3s0 state: down mac: <filter>
Drives:    HDD Total Size: 500.1GB (2.4% used) ID-1: /dev/sda model: WDC_WD5000LPCX size: 500.1GB
Partition: ID-1: / size: 23G used: 3.7G (18%) fs: ext4 dev: /dev/sda9
           ID-2: /home size: 74G used: 129M (1%) fs: ext4 dev: /dev/sda8
           ID-3: swap-1 size: 8.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda7
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A gpu: 42.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 199 Uptime: 19 min Memory: 1043.6/3871.3MB Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461) inxi: 2.2.35 

iwconfig

test@test:~$ iwconfig
lo        no wireless extensions.

wlp3s0    IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:on

enp0s20u3  no wireless extensions.

enp2s0    no wireless extensions.

Observação: quando eu verifico minhas informações, estou usando a conexão móvel com o pendrive.

Estou tentando pesquisar no google pela minha solução. Eu instalei o rtlwifi_new e siga o passo a passo no google, mas ainda não consigo me conectar.

    
por Rofi Fathurrohman 28.05.2017 / 08:32

1 resposta

1

Crie um /etc/modprobe.d/rtl8723be.conf com o seguinte conteúdo:

options rtl8723be fwlps=0

o problema é explicado no archlinux-wiki :

Some users may encounter errors with powersave on this card. This is shown with occasional disconnects that are not recognized by high level network managers (netctl, NetworkManager). This error can be confirmed by running dmesg -w or journalctl -f and looking for output related to powersave and the rtl8723ae/rtl8723be module. If you are having this issue, use the fwlps=0 kernel option, which should prevent the WiFi card from automatically sleeping and halting connection.

/etc/modprobe.d/rtl8723be.conf

options rtl8723be fwlps=0

    
por 28.05.2017 / 11:29