Descompactado e descompactado de um tarball que é a imagem do estiramento debian em um cartão SD. É um cartão SD de 16GB. Antes de descompactar a imagem para o cartão SD, eu formatei e criei uma partição usando o fdisk no Ubuntu VM. Então, mudei o sistema de arquivos para ext3 e iniciei o untarring. Tenho certeza de que o procedimento de montagem e desmontagem está correto.
O problema é que quando eu tento inicializar o cartão SD do computador de placa única, o kernel não parece encontrar o sistema de arquivos para iniciar. O processo de inicialização só será atingido. A última linha da mensagem de erro mostra que
end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,1)
Eu não estou criando o fs corretamente? Eu tentei consertá-lo usando fsck e ainda não está funcionando. A imagem em si é do Debian
Avise-me se precisar de mais informações para ajudar na investigação. Aprecie qualquer ajuda!
Aqui está a mensagem de erro da inicialização.
Starting kernel ...
** 60 printk messages dropped ** [ 0.000000] mvebu_mbus: win(6,1): f080e064 0x0
[ 0.000000] mvebu_mbus: win(6,2): f080e068 0x0
[ 0.000000] mvebu_mbus: win(6,3): f080e06c 0x0
[ 0.000000] mvebu_mbus: WIN7
[ 0.000000] mvebu_mbus: win(7,0): f080e070 0x0
[ 0.000000] mvebu_mbus: win(7,1): f080e074 0x0
[ 0.000000] mvebu_mbus: win(7,2): f080e078 0x0
[ 0.000000] mvebu_mbus: win(7,3): f080e07c 0x0
[ 0.000000] mvebu_mbus:
[ 0.000000] INTERREGS_WIN(8): f080e080 0xf1000000
[ 0.000000] mvebu_mbus:
[ 0.000000] SYNC_BARIER_WIN(9): f080e084 0x0
[ 0.000000]
[ 0.000000] mvebu_mbus: WIN8
[ 0.000000] mvebu_mbus: win(8,0): f080e090 0xf1d11
[ 0.000000] mvebu_mbus: win(8,1): f080e094 0xfff00000
[ 0.000000] mvebu_mbus: WIN9
[ 0.000000] mvebu_mbus: win(9,0): f080e098 0x1991
[ 0.000000] mvebu_mbus: win(9,1): f080e09c 0xf1100000
[ 0.000000] mvebu_mbus: WIN10
[ 0.000000] mvebu_mbus: win(10,0): f080e0a0 0x1591
[ 0.000000] mvebu_mbus: win(10,1): f080e0a4 0xf1110000
[ 0.000000] mvebu_mbus: WIN11
[ 0.000000] mvebu_mbus: win(11,0): f080e0a8 0xf04c1
[ 0.000000] mvebu_mbus: win(11,1): f080e0ac 0xf1200000
[ 0.000000] mvebu_mbus: WIN12
[ 0.000000] mvebu_mbus: win(12,0): f080e0b0 0x0
[ 0.000000] mvebu_mbus: win(12,1): f080e0b4 0x0
[ 0.000000] mvebu_mbus: WIN13
[ 0.000000] mvebu_mbus: win(13,0): f080e0b8 0x0
[ 0.000000] mvebu_mbus: win(13,1): f080e0bc 0x0
[ 0.000000] mvebu_mbus: WIN14
[ 0.000000] mvebu_mbus: win(14,0): f080e0c0 0x0
[ 0.000000] mvebu_mbus: win(14,1): f080e0c4 0x0
[ 0.000000] mvebu_mbus: WIN15
[ 0.000000] mvebu_mbus: win(15,0): f080e0c8 0x0
[ 0.000000] mvebu_mbus: win(15,1): f080e0cc 0x0
[ 0.000000] mvebu_mbus: WIN16
[ 0.000000] mvebu_mbus: win(16,0): f080e0d0 0x0
[ 0.000000] mvebu_mbus: win(16,1): f080e0d4 0x0
[ 0.000000] mvebu_mbus: WIN17
[ 0.000000] mvebu_mbus: win(17,0): f080e0d8 0x0
[ 0.000000] mvebu_mbus: win(17,1): f080e0dc 0x0
[ 0.000000] mvebu_mbus: WIN18
[ 0.000000] mvebu_mbus: win(18,0): f080e0e0 0x0
[ 0.000000] mvebu_mbus: win(18,1): f080e0e4 0x0
[ 0.000000] mvebu_mbus: WIN19
[ 0.000000] mvebu_mbus: win(19,0): f080e0e8 0x0
[ 0.000000] mvebu_mbus: win(19,1): f080e0ec 0x0
[ 0.000000] mvebu_mbus:
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000] Switching to timer-based delay loop, resolution 40ns
[ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[ 0.000011] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000232] Console: colour dummy device 80x30
[ 0.000247] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.000254] pid_max: default: 32768 minimum: 301
[ 0.000325] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000331] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000630] CPU: Testing write buffer coherency: ok
[ 0.000752] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000779] Setting up static identity map for 0x8280 - 0x82d8
[ 0.000874] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000983] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.079852] Booting CPU 1
[ 0.080003] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.080039] Brought up 2 CPUs
[ 0.080046] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[ 0.080050] CPU: All CPU(s) started in SVC mode.
[ 0.080452] devtmpfs: initialized
[ 0.082707] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.082891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.082998] xor: measuring software checksum speed
[ 0.179718] arm4regs : 2327.200 MB/sec
[ 0.279618] 8regs : 1578.400 MB/sec
[ 0.379514] 32regs : 1306.800 MB/sec
[ 0.379519] xor: using function: arm4regs (2327.200 MB/sec)
[ 0.379532] pinctrl core: initialized pinctrl subsystem
[ 0.380056] NET: Registered protocol family 16
[ 0.380703] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.385759] No ATAGs?
[ 0.385779] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.385785] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.385941] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.385950] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.609351] raid6: int32x1 gen() 167 MB/s
[ 0.779172] raid6: int32x1 xor() 208 MB/s
[ 0.949180] raid6: int32x2 gen() 254 MB/s
[ 1.118851] raid6: int32x2 xor() 238 MB/s
[ 1.288798] raid6: int32x4 gen() 326 MB/s
[ 1.458555] raid6: int32x4 xor() 248 MB/s
[ 1.628304] raid6: int32x8 gen() 324 MB/s
[ 1.798192] raid6: int32x8 xor() 227 MB/s
[ 1.798196] raid6: using algorithm int32x4 gen() 326 MB/s
[ 1.798200] raid6: .... xor() 248 MB/s, rmw enabled
[ 1.798204] raid6: using intx1 recovery algorithm
[ 1.798584] vgaarb: loaded
[ 1.798752] SCSI subsystem initialized
[ 1.798989] usbcore: registered new interface driver usbfs
[ 1.799026] usbcore: registered new interface driver hub
[ 1.799067] usbcore: registered new device driver usb
[ 1.799166] usb3_phy supply vcc not found, using dummy regulator
[ 1.799311] pps_core: LinuxPPS API ver. 1 registered
[ 1.799316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.799337] PTP clock support registered
[ 1.799376] EDAC MC: Ver: 3.0.0
[ 1.800158] clocksource: Switched to clocksource armada_370_xp_clocksource
[ 1.805503] NET: Registered protocol family 2
[ 1.805849] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.805902] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.805987] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.806026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.806048] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.806154] NET: Registered protocol family 1
[ 1.806317] RPC: Registered named UNIX socket transport module.
[ 1.806324] RPC: Registered udp transport module.
[ 1.806327] RPC: Registered tcp transport module.
[ 1.806331] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.806585] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.806796] mvebu-pmsu: CPU freq is currently broken on Armada 38x: disabling
[ 1.807267] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.808679] bounce: pool size: 64 pages
[ 1.808724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.808733] io scheduler noop registered
[ 1.808739] io scheduler deadline registered
[ 1.808751] io scheduler cfq registered (default)
[ 1.809196] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 1.809364] GPIO line 28 (spi0-cs3n) hogged as output/high
[ 1.809558] irq: Cannot allocate irq_descs @ IRQ47, assuming pre-allocated
[ 1.809767] irq: Cannot allocate irq_descs @ IRQ79, assuming pre-allocated
[ 1.809869] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 1.811930] libphy: Fixed MDIO Bus: probed
[ 1.812107] libphy: orion_mdio_bus: probed
[ 1.813834] mvneta f1070000.ethernet eth0: Using random mac address 4e:d9:14:4e:da:b0
[ 1.891446] mvneta f1034000.ethernet eth1: Using random mac address ba:fa:20:23:b2:1e
[ 1.891457] mvneta f1034000.ethernet eth1: could not find the PHY
[ 1.891463] mvneta f1034000.ethernet eth1: cannot probe MDIO bus
[ 1.920565] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.920570] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.920615] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[ 1.920619] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[ 1.920668] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 1.920673] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 1.921077] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[ 1.921087] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 1.921093] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
[ 1.921098] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.921538] PCI: bus0: Fast back to back transfers disabled
[ 1.921550] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.921563] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.921574] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.921657] PCI: bus1: Fast back to back transfers enabled
[ 1.921753] PCI: bus2: Fast back to back transfers enabled
[ 1.922145] PCI: bus3: Fast back to back transfers disabled
[ 1.922249] pci 0000:00:03.0: BAR 8: assigned [mem 0xf8000000-0xfdffffff]
[ 1.922256] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.922265] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.922276] pci 0000:03:00.0: BAR 3: assigned [mem 0xf8000000-0xfbffffff]
[ 1.922285] pci 0000:03:00.0: BAR 1: assigned [mem 0xfc000000-0xfc07ffff]
[ 1.922294] pci 0000:03:00.0: BAR 0: assigned [mem 0xfc080000-0xfc080fff]
[ 1.922302] pci 0000:03:00.0: BAR 2: assigned [mem 0xfc081000-0xfc081fff]
[ 1.922310] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 1.922316] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfdffffff]
[ 1.922486] mv_xor f1060800.xor: Marvell shared XOR driver
[ 1.960545] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 1.960671] mv_xor f1060900.xor: Marvell shared XOR driver
[ 2.000556] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 2.032745] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.035378] console [ttyS0] disabled
[ 2.035405] port->mapbase f1012000 ok (flags 822083584)
[ 2.035411] ttyS0: autoconf (0x0000, 0xf089a000): iir1=6 iir2=6 iir=3 type=16550A
[ 2.056641] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A
[ 3.006144] console [ttyS0] enabled
[ 3.015277] brd: module loaded
[ 3.021468] loop: module loaded
[ 3.025491] nbd: registered device at major 43
[ 3.033776] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 3.041440] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 3.050530] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 3.060071] scsi host0: ahci-mvebu
[ 3.063910] scsi host1: ahci-mvebu
[ 3.067471] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 42
[ 3.075424] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 42
[ 3.084909] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.091493] ehci-pci: EHCI PCI platform driver
[ 3.096002] ehci-orion: EHCI orion driver
[ 3.100133] orion-ehci f1058000.usb: EHCI Host Controller
[ 3.105604] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 3.113255] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 3.130170] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 3.136188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.143009] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.150257] usb usb1: Product: EHCI Host Controller
[ 3.155146] usb usb1: Manufacturer: Linux 4.4.8-armada-17.02.2-g60f9991 ehci_hcd
[ 3.162568] usb usb1: SerialNumber: f1058000.usb
[ 3.167541] hub 1-0:1.0: USB hub found
[ 3.171325] hub 1-0:1.0: 1 port detected
[ 3.175753] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 3.181106] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 3.188679] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 3.197256] xhci-hcd f10f0000.usb3: irq 45, io mem 0xf10f0000
[ 3.203102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.209908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.217155] usb usb2: Product: xHCI Host Controller
[ 3.222055] usb usb2: Manufacturer: Linux 4.4.8-armada-17.02.2-g60f9991 xhci-hcd
[ 3.229468] usb usb2: SerialNumber: f10f0000.usb3
[ 3.234513] hub 2-0:1.0: USB hub found
[ 3.238287] hub 2-0:1.0: 1 port detected
[ 3.242405] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 3.247735] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[ 3.255284] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.263466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.271140] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.278380] usb usb3: Product: xHCI Host Controller
[ 3.283282] usb usb3: Manufacturer: Linux 4.4.8-armada-17.02.2-g60f9991 xhci-hcd
[ 3.290703] usb usb3: SerialNumber: f10f0000.usb3
[ 3.295713] hub 3-0:1.0: USB hub found
[ 3.299486] hub 3-0:1.0: 1 port detected
[ 3.303663] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 3.308997] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[ 3.316583] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 3.325163] xhci-hcd f10f8000.usb3: irq 46, io mem 0xf10f8000
[ 3.331007] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.337813] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.345110] usb usb4: Product: xHCI Host Controller
[ 3.349999] usb usb4: Manufacturer: Linux 4.4.8-armada-17.02.2-g60f9991 xhci-hcd
[ 3.357420] usb usb4: SerialNumber: f10f8000.usb3
[ 3.362435] hub 4-0:1.0: USB hub found
[ 3.366207] hub 4-0:1.0: 1 port detected
[ 3.370314] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 3.375643] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[ 3.383192] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.391369] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.398174] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.405478] usb usb5: Product: xHCI Host Controller
[ 3.410377] usb usb5: Manufacturer: Linux 4.4.8-armada-17.02.2-g60f9991 xhci-hcd
[ 3.417790] usb usb5: SerialNumber: f10f8000.usb3
[ 3.422803] hub 5-0:1.0: USB hub found
[ 3.426575] hub 5-0:1.0: 1 port detected
[ 3.430802] usbcore: registered new interface driver cdc_acm
[ 3.436473] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.440180] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.440207] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.455380] usbcore: registered new interface driver usblp
[ 3.460971] usbcore: registered new interface driver usb-storage
[ 3.467058] usbcore: registered new interface driver usbserial
[ 3.472992] usbcore: registered new interface driver usbserial_generic
[ 3.479556] usbserial: USB Serial support registered for generic
[ 3.485626] usbcore: registered new interface driver aircable
[ 3.491416] usbserial: USB Serial support registered for aircable
[ 3.497553] usbcore: registered new interface driver belkin_sa
[ 3.503432] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 3.512713] usbcore: registered new interface driver usb_debug
[ 3.518578] usbserial: USB Serial support registered for debug
[ 3.524471] usbcore: registered new interface driver digi_acceleport
[ 3.530926] usbserial: USB Serial support registered for Digi 2 port USB adapter
[ 3.538361] usbserial: USB Serial support registered for Digi 4 port USB adapter
[ 3.545820] usbcore: registered new interface driver ftdi_sio
[ 3.551608] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.559059] usbcore: registered new interface driver garmin_gps
[ 3.565027] usbserial: USB Serial support registered for Garmin GPS usb/tty
[ 3.572044] usbcore: registered new interface driver ir_usb
[ 3.577649] usbserial: USB Serial support registered for IR Dongle
[ 3.583888] usbcore: registered new interface driver oti6858
[ 3.589580] usbserial: USB Serial support registered for oti6858
[ 3.595640] usbcore: registered new interface driver pl2303
[ 3.601257] usbserial: USB Serial support registered for pl2303
[ 3.607227] usbcore: registered new interface driver sierra
[ 3.612841] usbserial: USB Serial support registered for Sierra USB modem
[ 3.619683] usbcore: registered new interface driver usb_serial_simple
[ 3.626262] usbserial: USB Serial support registered for carelink
[ 3.632397] usbserial: USB Serial support registered for zio
[ 3.638089] usbserial: USB Serial support registered for funsoft
[ 3.644141] usbserial: USB Serial support registered for flashloader
[ 3.650540] usbserial: USB Serial support registered for google
[ 3.656493] usbserial: USB Serial support registered for vivopay
[ 3.662545] usbserial: USB Serial support registered for moto_modem
[ 3.668845] usbserial: USB Serial support registered for novatel_gps
[ 3.675242] usbserial: USB Serial support registered for hp4x
[ 3.681031] usbserial: USB Serial support registered for suunto
[ 3.686987] usbserial: USB Serial support registered for siemens_mpi
[ 3.693400] usbcore: registered new interface driver ti_usb_3410_5052
[ 3.699876] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ 3.707583] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ 3.715304] usbcore: registered new interface driver usblcd
[ 3.720931] usbcore: registered new interface driver usbled
[ 3.726546] usbcore: registered new interface driver legousbtower
[ 3.732694] usbcore: registered new interface driver usbsevseg
[ 3.738790] i2c /dev entries driver
[ 3.746252] rtc-ds1307 0-0068: rtc core: registered m41t00 as rtc0
[ 3.762936] armada_thermal f10e4078.thermal: Overheat threshold between 92..107
[ 3.775391] mvebu_edac: mvebu_mc_err_probe: No ECC DIMMs discovered
[ 3.781867] sdhci: Secure Digital Host Controller Interface driver
[ 3.788061] sdhci: Copyright(c) Pierre Ossman
[ 3.792642] sdhci-pxav3 f10d8000.sdhci: No vmmc regulator found
[ 3.798578] sdhci-pxav3 f10d8000.sdhci: No vqmmc regulator found
[ 3.850173] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 3.857724] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.863491] TS-7800-V2 SD card driver
[ 3.867175] tssdcard_probe enable FPGA...
[ 3.871221] pci 0000:00:03.0: enabling device (0140 -> 0142)
[ 3.876929] nvec_used: 16 @ 0
[ 3.879920] ..109
[ 3.881876] ..110
[ 3.883815] ..111
[ 3.885753] ..112
[ 3.887690] ..113
[ 3.889628] ..114
[ 3.891595] ..115
[ 3.893535] ..116
[ 3.895471] ..117
[ 3.897400] ..118
[ 3.899336] ..119
[ 3.901279] ..120
[ 3.903210] ..121
[ 3.905139] ..122
[ 3.907068] ..123
[ 3.908997] ..124
[ 3.933978] mmc0: MAN_BKOPS_EN bit is not set
[ 3.941961] mmc0: new high speed MMC card at address 0001
[ 3.957663] mmcblk0: mmc0:0001 MMC04G 3.52 GiB
[ 3.972343] mmcblk0boot0: mmc0:0001 MMC04G partition 1 16.0 MiB
[ 3.988398] mmcblk0boot1: mmc0:0001 MMC04G partition 2 16.0 MiB
[ 4.004475] mmcblk0rpmb: mmc0:0001 MMC04G partition 3 128 KiB
[ 4.017263] mmcblk0: p1
[ 4.027041] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.032644] usbcore: registered new interface driver usbhid
[ 4.038229] usbhid: USB HID core driver
[ 4.042462] NET: Registered protocol family 10
[ 4.047434] sit: IPv6 over IPv4 tunneling driver
[ 4.052471] NET: Registered protocol family 17
[ 4.056935] 8021q: 802.1Q VLAN Support v1.8
[ 4.061232] ThumbEE CPU extension supported.
[ 4.065519] Registering SWP/SWPB emulation handler
[ 4.071186] Btrfs loaded
[ 4.075015] rtc-ds1307 0-0068: setting system clock to 2018-07-30 17:46:22 UTC (1532972782)
[ 4.084731] VFS: Cannot open root device "tssdcarda1" or unknown-block(254,1): error -6
[ 4.092767] Please append a correct "root=" boot option; here are the available partitions:
[ 4.101151] 0100 4096 ram0 (driver?)
[ 4.105791] 0101 4096 ram1 (driver?)
[ 4.110458] 0102 4096 ram2 (driver?)
[ 4.115096] 0103 4096 ram3 (driver?)
[ 4.119733] 0104 4096 ram4 (driver?)
[ 4.124380] 0105 4096 ram5 (driver?)
[ 4.129018] 0106 4096 ram6 (driver?)
[ 4.133662] 0107 4096 ram7 (driver?)
[ 4.138300] 0108 4096 ram8 (driver?)
[ 4.142946] 0109 4096 ram9 (driver?)
[ 4.147583] 010a 4096 ram10 (driver?)
[ 4.152316] 010b 4096 ram11 (driver?)
[ 4.157040] 010c 4096 ram12 (driver?)
[ 4.161773] 010d 4096 ram13 (driver?)
[ 4.166497] 010e 4096 ram14 (driver?)
[ 4.171226] 010f 4096 ram15 (driver?)
[ 4.175960] b300 3694592 mmcblk0 driver: mmcblk
[ 4.181300] b301 3693568 mmcblk0p1 989da34c-01
[ 4.186636] b318 128 mmcblk0rpmb (driver?)
[ 4.191888] b310 16384 mmcblk0boot1 (driver?)
[ 4.197223] b308 16384 mmcblk0boot0 (driver?)
[ 4.202564] fe00 15138816 tssdcarda (driver?)
[ 4.207637] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,1)
[ 4.216096] CPU0: stopping
[ 4.218814] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.8-armada-17.02.2-g60f9991 #0
[ 4.226748] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 4.232696] [<c001826c>] (unwind_backtrace) from [<c0012e80>] (show_stack+0x10/0x18)
[ 4.240462] [<c0012e80>] (show_stack) from [<c02d3880>] (dump_stack+0x6c/0x90)
[ 4.247704] [<c02d3880>] (dump_stack) from [<c0015e8c>] (handle_IPI+0x188/0x1bc)
[ 4.255120] [<c0015e8c>] (handle_IPI) from [<c00094b0>] (gic_handle_irq+0x80/0x94)
[ 4.262708] [<c00094b0>] (gic_handle_irq) from [<c00139d4>] (__irq_svc+0x54/0x90)
[ 4.270207] Exception stack(0xc08d1f60 to 0xc08d1fa8)
[ 4.275272] 1f60: 00000000 00000000 c08d1fb8 c0021240 c08d24e0 c06796c0 c08ca364 c0904925
[ 4.283470] 1f80: 00000001 00000001 c0904925 00000000 c08ca380 c08d1fb0 c0010894 c0010880
[ 4.291664] 1fa0: 60000113 ffffffff
[ 4.295162] [<c00139d4>] (__irq_svc) from [<c0010880>] (arch_cpu_idle+0x1c/0x3c)
[ 4.302580] [<c0010880>] (arch_cpu_idle) from [<c00589f8>] (cpu_startup_entry+0x100/0x19c)
[ 4.310866] [<c00589f8>] (cpu_startup_entry) from [<c0887c08>] (start_kernel+0x354/0x3c4)
[ 4.319064] [<c0887c08>] (start_kernel) from [<0000807c>] (0x807c)
[ 4.325263] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,1)
Tags boot kernel debian sd-card filesystems