Estou tentando usar minha impressora / scanner Dell P713 na minha máquina. Eu (com alguma dificuldade) consegui a impressora funcionar, mas não consigo fazer o scanner funcionar.
Em execução, sudo sane-find-scanner fornece a seguinte saída:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x413c, product=0x5236) at libusb:006:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
No entanto, sudo scanimage -L apresenta o seguinte:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Eu editei o /etc/sane.d/lexmark.conf adicionando as duas últimas linhas (sei que tecnicamente não é uma Lexmark, mas na verdade tive que usar um driver da Lexmark para fazer a impressora funcionar):
# X11xx series
usb 0x043d 0x007c
# X12xx series
usb 0x043d 0x007d
# Dell A920
usb 0x413c 0x5105
# X74
usb 0x43d 0x0060
# Dell P713
usb 0x413c 0x5236
Como o site da Web indica que determinadas impressoras Dell podem usar o backend xerox, Eu também tentei adicionar a linha ao arquivo de configuração do xerox sem sucesso.
Qualquer conselho seria apreciado.