Eu estabeleci uma conexão entre minha VM e meu cliente Ubuntu
$ sudo openvpn --config config.ovpn
Sat Nov 4 14:38:29 2017 OpenVPN 2.3.4 i586-pc-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [MH] [IPv6] built on Jun 26 2017
Sat Nov 4 14:38:29 2017 library versions: OpenSSL 1.0.1t 3 May 2016, LZO 2.08
Sat Nov 4 14:38:29 2017 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Sat Nov 4 14:38:29 2017 UDPv4 link local: [undef]
Sat Nov 4 14:38:29 2017 UDPv4 link remote: [AF_INET]x.x.x.x:1194
Sat Nov 4 14:38:29 2017 WARNING: 'keydir' is present in local config but missing in remote config, local='keydir 0'
Sat Nov 4 14:38:29 2017 [canard.ch] Peer Connection Initiated with [AF_INET]x.x.x.x:1194
Sat Nov 4 14:38:31 2017 TUN/TAP device tun1 opened
Sat Nov 4 14:38:31 2017 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 4 14:38:31 2017 /sbin/ip link set dev tun1 up mtu 1500
Sat Nov 4 14:38:31 2017 /sbin/ip addr add dev tun1 local 10.8.0.6 peer 10.8.0.5
RTNETLINK answers: File exists
Sat Nov 4 14:38:31 2017 ERROR: Linux route add command failed: external program exited with error status: 2
Sat Nov 4 14:38:31 2017 Initialization Sequence Completed
Em seguida, a partir do servidor ou do cliente, vejo a interface tun :
tun1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.8.0.6 P-t-P:10.8.0.5 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:168 (168.0 B)
Mas, neste caso, não consigo pingar 10.8.0.5 . Não consigo trocar dados entre o cliente e o servidor.
Qual é o meu erro?
Eu também tentei adicionar essas regras a iptables
iptables -A INPUT -i tun+ -j ACCEPT
iptables -A FORWARD -i tun+ -j ACCEPT
iptables -A INPUT -i tap+ -j ACCEPT
iptables -A FORWARD -i tap+ -j ACCEPT
No lado do cliente, recebo esta configuração:
$ iptables -L OUTPUT -nv; ip route; ip route get 10.8.0.5
Chain OUTPUT (policy ACCEPT 7279 packets, 1483K bytes)
pkts bytes target prot opt in out source destination
10.8.0.5 dev tun1 proto kernel scope link src 10.8.0.6
10.8.0.5 dev tun2 proto kernel scope link src 10.8.0.6
10.8.0.1 via 10.8.0.5 dev tun1
10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1
10.8.0.0/24 via 10.8.0.2 dev tun0
x.x.x.0/20 dev eth0 proto kernel scope link src x.x.x.x
default via x.x.x.x dev eth0
10.8.0.5 dev tun1 src 10.8.0.6
cache mtu 1500 advmss 1460 hoplimit 64
$ iptables -L OUTPUT -nv -t nat
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
$ ip rule list
0: from all lookup local
32766: from all lookup main
32767: from all lookup default