O ISC DHCP Server não distribui servidores DNS para clientes [fechados]

Question

Ontem eu configurei um servidor isc dhcp em um pi de framboesa junto com um servidor de bind dns.

Agora, o problema é que o servidor dhcp não distribui o servidor dns para os clientes, mas se eu especificar manualmente o servidor DNS local na configuração do meu computador Windows, tudo funcionará corretamente. By the way, todos os meus clientes recebem um endereço IPv4 do servidor dhcp.

minha configuração do servidor dhcp: /etc/dhcp/dhcpd.conf :

#
# Sample configuration file for ISC dhcpd for Debian
#
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-updates on;
ddns-update-style interim;
ddns-domainname "mydomain.home";
ddns-rev-domainname "0.1.10.in-addr.arpa";
ignore client-updates;
# If you have fixed-address entries you want to use dynamic dns
update-static-leases on;


# option definitions common to all supported networks...
option domain-name "mydomain.home";
option domain-name-servers 10.1.0.2;
option ntp-servers 0.pool.ntp.org, 1.pool.ntp.org, 2.pool.ntp.org, 3.pool.ntp.org;

default-lease-time 600;
max-lease-time 7200;

ping-check true;
ping-timeout 2;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;


key dhcpupdate {
        algorithm hmac-md5;
        secret MYSUPERSECRET==;
}

zone naef.home {
        primary 127.0.0.1;
        key dhcpupdate;
}

zone 0.1.10.in-addr.arpa {
        primary 127.0.0.1;
        key dhcpupdate;
}


# This is a very basic subnet declaration.

subnet 10.1.0.0 netmask 255.255.255.0 {
  range 10.1.0.50 10.1.0.254;
  option routers 10.1.0.1;
  option broadcast-address 10.1.0.255;
}


# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.fugue.com;
#}

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers rtr-224.example.org;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers rtr-29.example.org;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}

    

Answer 1

Ok. Consegui. Meu provedor reativou o serviço dhcp do meu roteador. Depois de desabilitar tudo funciona corretamente!