Quando eu ligava o Seagate Hard Drive no Windows não reconhece o disco rígido, mas mostra-se em removido com segurança options.In Ubuntu 14.04, ele não reconhece o disco rígido.
Aqui está o lsusb mensagem, onde a informação do disco é mostrado:
Bus 002 Device 003: ID 0bc2:ab26 Seagate RSS LLC
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:07dc Intel Corp.
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 1bcf:2b90 Sunplus Innovation Technology Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Aqui está o fdisk -l info:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xcb4662fa
Device Boot Start End Blocks Id System
/dev/sda1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.
Aqui está a saída dmesg :
[ 2275.753900] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
[ 2275.771624] usb 2-1: New USB device found, idVendor=0bc2, idProduct=ab26
[ 2275.771638] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2275.771646] usb 2-1: Product: BUP Slim RD
[ 2275.771652] usb 2-1: Manufacturer: Seagate
[ 2275.771657] usb 2-1: SerialNumber: NA97LG8X
[ 2275.775221] scsi host3: uas
[ 2275.776116] scsi 3:0:0:0: Direct-Access Seagate BUP Slim RD 0108 PQ: 0 ANSI: 6
[ 2275.777453] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2323.918346] sd 3:0:0:0: [sdb] Spinning up disk...
[ 2344.978027] ...not responding...
[ 2517.874976] sd 3:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 2517.874988] sd 3:0:0:0: tag#0 CDB: Read capacity(16) 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00
[ 2517.875072] scsi host3: uas_eh_bus_reset_handler start
[ 2517.987245] usb 2-1: reset SuperSpeed USB device number 3 using xhci_hcd
[ 2518.005080] scsi host3: uas_eh_bus_reset_handler success
[ 2528.003082] sd 3:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 2528.003099] sd 3:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[ 2528.003109] scsi host3: uas_eh_bus_reset_handler start
[ 2528.115502] usb 2-1: reset SuperSpeed USB device number 3 using xhci_hcd
[ 2528.135546] scsi host3: uas_eh_bus_reset_handler success
[ 2528.135563] sd 3:0:0:0: Device offlined - not ready after error recovery
[ 2528.135630] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135654] sd 3:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2528.135661] sd 3:0:0:0: [sdb] Sense not available.
[ 2528.135670] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135679] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135688] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135698] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2528.135704] sd 3:0:0:0: [sdb] Sense not available.
[ 2528.135712] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135721] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135732] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135740] sd 3:0:0:0: [sdb] Write Protect is off
[ 2528.135748] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 2528.135756] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135763] sd 3:0:0:0: [sdb] Asking for cache data failed
[ 2528.135769] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2528.135777] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135785] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.135793] sd 3:0:0:0: rejecting I/O to offline device
[ 2528.136447] sd 3:0:0:0: [sdb] Attached SCSI disk