Meu sistema de arquivos raiz e doméstico ext-4 tornou-se repentinamente somente leitura. Como posso descobrir qual foi o motivo disso?
O sistema é ubuntu 16.04 com systemd (instalado em um ssd), onde root e home partition são criptografados com dm-crypt e formatados com um ext-4 fs.
Editar Logo depois que eu escrevi este post, o sistema travou novamente (duas vezes) com uma tela preta / colorida levemente intermitente. Agora parece funcionar novamente.
O /etc/fstab contém para a partição raiz a opção de montagem errors=remount-ro
O smartctl -a /dev/sda dá
smartctl -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZ7PC256HAFU-000L7
Serial Number: S0Y5NSAC602442
Firmware Version: CXM72L1Q
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 23 17:07:40 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1020) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 6093
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 2810
175 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0
177 Wear_Leveling_Count 0x0013 095 095 017 Pre-fail Always - 169
178 Used_Rsvd_Blk_Cnt_Chip 0x0013 094 094 010 Pre-fail Always - 230
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 094 094 010 Pre-fail Always - 450
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 094 094 010 Pre-fail Always - 7614
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 066 042 000 Old_age Always - 34
195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 1
233 Media_Wearout_Indicator 0x003a 200 200 000 Old_age Always - 0
234 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 48
236 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 48
237 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 169
238 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 450
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6092 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Alguns sistemas Linux montam partições como somente leitura se não forem desmontadas corretamente e o sistema achar que o sabor apropriado de fsck deve ser executado antes do uso normal.
Verifique seus logs ou dmesg para descobrir se esse é o caso