Udev: não aceita regra para gps [fechado]

2

Estou tentando criar uma regra do udev para um GPS. Eu tentei várias maneiras, mas não consigo fazer com que o dispositivo seja capturado pela regra:

lsusb:

Barramento 002 Dispositivo 007: ID 067b: 2303 Prolific Technology, Inc. Porta Serial PL2303

    udevadm info -a -p $(udevadm info -q path -n /dev/ttyUSB0)

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="pl2303"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0':
    KERNELS=="2-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="pl2303"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="03"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{modalias}=="usb:v067Bp2303d0300dc00dsc00dp00icFFisc00ip00"
    ATTRS{supports_autosuspend}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:10.0/usb2/2-1':
    KERNELS=="2-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="20"
    ATTRS{idVendor}=="067b"
    ATTRS{idProduct}=="2303"
    ATTRS{bcdDevice}=="0300"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="7"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Prolific Technology Inc."
    ATTRS{product}=="USB-Serial Controller"

  looking at parent device '/devices/pci0000:00/0000:00:10.0/usb2':
    KERNELS=="usb2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="157"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0001"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 1.10"
    ATTRS{maxchild}=="2"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-34-generic-pae uhci_hcd"
    ATTRS{product}=="UHCI Host Controller"
    ATTRS{serial}=="0000:00:10.0"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:10.0':
    KERNELS=="0000:00:10.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{vendor}=="0x1106"
    ATTRS{device}=="0x3038"
    ATTRS{subsystem_vendor}=="0x1106"
    ATTRS{subsystem_device}=="0x3038"
    ATTRS{class}=="0x0c0300"
    ATTRS{irq}=="21"
    ATTRS{local_cpus}=="ff"
    ATTRS{local_cpulist}=="0-7"
    ATTRS{modalias}=="pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS=="

eu tentei com estas regras, eu tentei com estas regras, mas nenhuma funciona:

#DRIVERS=="sierra",SUBSYSTEMS=="usb",ATTRS{bInterfaceNumber}=="03",SYMLINK="ttyACM10"
#DRIVERS=="pl2303",SUBSYSTEMS=="usb-serial",ATTRS{idVendor}=="067b",ATTRS{idProduct}=="2303",ATTRS{bInterfaceNumber}=="00",SYMLINK="ttyGPS"
#DRIVERS=="pl2303",SUBSYSTEMS=="usb-serial",ATTRS{idVendor}=="067b",ATTRS{idProduct}=="2303",ATTRS{manufacturer}=="Prolific Technology Inc.",ATTRS{port_number}=="0",SYMLINK="ttyGPS"
#DRIVERS=="pl2303",SUBSYSTEM == "usb-serial", ATTRS{serial}=="0000:00:10.0", SYMLINK="ttyAGSP"
#DRIVERS=="pl2303",SUBSYSTEM=="tty"ATTRS{idVendor}=="067b",ATTRS{idProduct}=="2303",ATTRS{serial}=="0000:00:10.0",SYMLINK="ttyGPS"

o sistema gera o seguinte link simbólico:

[ 4516.789581] pl2303 2-1:1.0: pl2303 converter detected
[ 4516.803239] usb 2-1: pl2303 converter now attached to ttyUSB0

Alguma correção para isso? Obrigado !!

    
por max 28.02.2013 / 22:05

0 respostas