Por que 'ip addr' mostrando inet 192.168.122.1/24?

0

Meu endereço IP local é: 10.102.42.102, mas não entendo o resto do endereço. Alguém pode explicar por quê?

root@HitHiFitHai:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 78:24:af:36:06:cb brd ff:ff:ff:ff:ff:ff
inet 10.102.42.102/8 brd 10.255.255.255 scope global eth1
   valid_lft forever preferred_lft forever
inet6 fe80::7a24:afff:fe36:6cb/64 scope link 
   valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default 
link/ether 56:9c:21:33:37:c8 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
   valid_lft forever preferred_lft forever
4: macvtap0@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
link/ether 52:54:00:d3:46:e2 brd ff:ff:ff:ff:ff:ff
inet6 fe80::5054:ff:fed3:46e2/64 scope link 
   valid_lft forever preferred_lft forever
 root@HitHiFitHai:~#
    
por Shravan40 22.05.2015 / 02:21

1 resposta

1
: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default 
link/ether 56:9c:21:33:37:c8 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
   valid_lft forever preferred_lft forever

Esta é uma rede bridge "padrão" criada pela libvirt, para fornecer rede a máquinas virtuais (nat se lembrar bem) 192.168.122 / 1 é uma rede de classe C com máscara de rede de 255.255.255.0 (24 bits)

    
por 22.05.2015 / 04:41

Tags