Wifi descarta e reconecta com UBUNTU 14.04 (Realtek RTL8188)

13

Acabei de instalar o UBUNTU 14.04 LTS em um Toshiba Satellite C655D. Meu wifi cai ocasionalmente, e tudo o que tenho que fazer para reconectar é desabilitar meu wifi e habilitar wifi do ícone wireless no canto superior direito. É simplesmente chato.

Qualquer ajuda seria apreciada, eu sou novo no UBUNTU, mas estou interessado em aprender os comandos do linux. Felizmente, alguns comandos são semelhantes ao DOS e ao código de lote.

Eu uso um roteador e não tenho problemas com outros dispositivos sem fio no momento, incluindo outro laptop rodando 14.04, mas é um Aspire One mais antigo.

Aqui estão as informações do wireless_script que encontrei no fórum:

======== Wireless-Info START ========

System-Info ~~~~~~~~~~~~~~~~~~~~~~~~

Satellite-C655D 3.13.0-32-generic x86_64,  Ubuntu 14.04 LTS, trusty

CPU    : AMD C-50 Processor
Memory : 2606 MB
Uptime : 11:38:53 up  2:59,  2 users,  load average: 0.53, 0.67, 0.69

lspci ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:8181]
Kernel driver in use: rtl8192ce
06:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8152 v1.1 Fast Ethernet [1969:2060] (rev c1)
Subsystem: Toshiba America Info Systems Device [1179:ff1e]
Kernel driver in use: atl1c

lsusb ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Bus 003 Device 002: ID 10f1:1a34 Importek 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c06c Logitech, Inc. Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Informações sobre o cartão PCMCIA ~~~~~~~~~~~~~~~~~~~

iwconfig ~~~~~~~~~~~~~~~~~~~~~~~~~~~

wlan0     IEEE 802.11bgn  ESSID:"Home"  
      Mode:Managed  Frequency:2.457 GHz  Access Point: <MAC C-01 Home>   
      Bit Rate=18 Mb/s   Tx-Power=20 dBm   
      Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
      Power Management:off
      Link Quality=56/70  Signal level=-54 dBm  
      Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
      Tx excessive retries:0  Invalid misc:90   Missed beacon:0

rfkill ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Interface        Soft blocked  Hard blocked
0: phy0: Wireless LAN      no            no

lsmod ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

rtl8192ce              53550  0 
rtl_pci                26690  1 rtl8192ce
rtlwifi                63475  2 rtl_pci,rtl8192ce
rtl8192c_common        53172  1 rtl8192ce
mac80211              630653  3 rtl_pci,rtlwifi,rtl8192ce
cfg80211              484040  2 mac80211,rtlwifi
wmi                    19177  1 toshiba_acpi

parâmetros do módulo ~~~~~~~~~~~~~~~~~~

cfg80211      (2): cfg80211_disable_40mhz_24ghz=N | ieee80211_regdom=00
mac80211      (5): beacon_loss_count=7 | ieee80211_default_rc_algo=minstrel_ht | max_nullfunc_tries=2 | max_probe_tries=5 | probe_wait_ms=500
rtl8192ce     (5): debug=0 | fwlps=Y | ips=Y | swenc=N | swlps=N
wmi           (2): debug_dump_wdg=N | debug_event=N

nm-tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

State: connected (global)
================o=============o===========o==============o=========o===========o==============o===========
 Interface & ID | Type        | Driver    | State        | Default | Speed     | Support      | HW Addr   
================o=============o===========o==============o=========o===========o==============o===========
 eth0           | Wired       | atl1c     | unavailable  | no      |           |              | <MAC eth0>
----------------+-------------+-----------+--------------+---------+-----------+--------------+-----------
 wlan0  [Home]  | 802.11 WiFi | rtl8192ce | connected    | yes     | 18 Mb/s   | WEP/WPA/WPA2 | <MAC wlan0>

MyCharterWiFia0-2G: Infra, <MAC C-NA MyCharterWiFia0-2G 1>, Freq 2417 MHz, Rate 54 Mb/s, Strength 40 WPA2
*Home:           Infra, <MAC C-01 Home>, Freq 2457 MHz, Rate 54 Mb/s, Strength 66
notyours:        Infra, <MAC C-02 notyours>, Freq 2452 MHz, Rate 54 Mb/s, Strength 20 WPA2

Address:         192.168.1.121
Prefix:          24 (255.255.255.0)
Gateway:         192.168.1.1
DNS:             removed
DNS:             removed
DNS:             removed
----------------+-------------+-----------+--------------+---------+-----------+--------------+-----------

NetworkManager.state ~~~~~~~~~~~~~~~

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

NetworkManager.conf ~~~~~~~~~~~~~~~~

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

Perfis NM WiFi ~~~~~~~~~~~~~~~~~~~

Home                 : ssid=Home | mac-address=<MAC wlan0> | ipv6=auto | ipv4=auto 

interfaces ~~~~~~~~~~~~~~~~~~~~~~~~~

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

resolv.conf ~~~~~~~~~~~~~~~~~~~~~~~~

nameserver 127.0.1.1

Rotas e amp; Ping ~~~~~~~~~~~~~~~~~~~~~~

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 wlan0
192.168.1.0     0.0.0.0         255.255.255.0   U     9      0        0 wlan0

--- 192.168.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 2.315/2.845/3.376/0.533 ms

--- 127.0.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.088/0.088/0.088/0.000 ms

iw reg get ~~~~~~~~~~~~~~~~~~~~~~~~~

(Region : "en_US.UTF-8")
country 00:
(2402 - 2472 @ 40), (3, 20)
(2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS

iwlist chan ~~~~~~~~~~~~~~~~~~~~~~~~

wlan0     13 channels in total; available frequencies :
      Channel 01 (2.412 GHz) - 13 (2.472 GHz)

      Current Frequency:2.457 GHz (Channel 10)

scan iwlist ~~~~~~~~~~~~~~~~~~~~~~~~

wlan0     Scan completed :
      Cell 01 - Address: <MAC C-01 Home>
                Channel:10
                Frequency:2.457 GHz (Channel 10)
                Quality=54/70  Signal level=-56 dBm  
                Encryption key:off
                ESSID:"Home"
                Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                          24 Mb/s; 36 Mb/s; 54 Mb/s
                Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                Mode:Master
                Extra:tsf=000000a88b1ceaa6
                Extra: Last beacon: 84ms ago
      Cell 02 - Address: <MAC C-02 notyours>
                Channel:9
                Frequency:2.452 GHz (Channel 9)
                Quality=24/70  Signal level=-86 dBm  
                Encryption key:on
                ESSID:"notyours"
                Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                          24 Mb/s; 36 Mb/s; 54 Mb/s
                Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                Mode:Master
                Extra:tsf=00000c380d063183
                Extra: Last beacon: 368ms ago
                IE: IEEE 802.11i/WPA2 Version 1
                    Group Cipher : CCMP
                    Pairwise Ciphers (1) : CCMP
                    Authentication Suites (1) : PSK

lista negra ~~~~~~~~~~~~~~~~~~~~~~~~~~

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

modinfo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[rtl8192ce]
filename:       /lib/modules/3.13.0-32-generic/kernel/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192ce.ko
firmware:       rtlwifi/rtl8192cfwU_B.bin
firmware:       rtlwifi/rtl8192cfwU.bin
firmware:       rtlwifi/rtl8192cfw.bin
srcversion:     EF063698748457BBEDB4633
depends:        rtlwifi,rtl_pci,rtl8192c-common,mac80211
parm:           swenc:Set to 1 for software crypto (default 0)
parm:           ips:Set to 0 to not use link power save (default 1)
parm:           swlps:Set to 1 to use SW control power save (default 0)
parm:           fwlps:Set to 1 to use FW control power save (default 1)
parm:           debug:Set debug level (0-5) (default 0) (int)

[rtl_pci]
filename:       /lib/modules/3.13.0-32-generic/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
srcversion:     D5E4890DC428FA5A1BF92DF
depends:        mac80211,rtlwifi

[rtlwifi]
filename:       /lib/modules/3.13.0-32-generic/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
srcversion:     E1F4663325225EE8DBA54CA
depends:        mac80211,cfg80211

[rtl8192c_common]
filename:       /lib/modules/3.13.0-32-generic/kernel/drivers/net/wireless/rtlwifi/rtl8192c/rtl8192c-common.ko
srcversion:     32F826C623BC49F764F7974
depends:        

[mac80211]
filename:       /lib/modules/3.13.0-32-generic/kernel/net/mac80211/mac80211.ko
srcversion:     8ADA881D348148A3358334C
depends:        cfg80211
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/3.13.0-32-generic/kernel/net/wireless/cfg80211.ko
srcversion:     E786D076B61F97809B04B64
depends:        
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

regras do udev ~~~~~~~~~~~~~~~~~~~~~~~~~

# PCI device 0x1969:0x2060 (atl1c)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth0>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x10ec:0x8176 (rtl8192ce)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC wlan0>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"

Arquivos / entradas personalizadas ~~~~~~~~~~~~~~~

/etc/modules        : Default
/etc/rc.local       : Default
/etc/modprobe.d     : Not Default
/etc/pm/(cnf|pw|sl) : Default

[/etc/modprobe.d]
mlx4.conf         : softdep mlx4_core post: mlx4_en

Linha de inicialização do kernel ~~~~~~~~~~~~~~~~~~~

BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7

dmesg ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[    2.226619] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    2.227831] audit: initializing netlink socket (disabled)
[    4.141892] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x250f01)
[   13.317618] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.029316] wmi: Mapper loaded
[   16.024516] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[   16.245437] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   16.246292] rtlwifi: wireless switch is on
[   21.829897] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.831623] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   24.389024] wlan0: authenticate with <MAC C-01 Home>
[   24.410340] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[   24.413577] wlan0: authenticated
[   24.421609] wlan0: associate with <MAC C-01 Home> (try 1/3)
[   24.423984] wlan0: RX AssocResp from <MAC C-01 Home> (capab=0x401 status=0 aid=8)
[   24.424197] wlan0: associated
[   24.424263] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.428436] wlan0: deauthenticating from <MAC C-01 Home> by local choice (reason=2)
[   24.429155] wlan0: authenticate with <MAC C-01 Home>
[   24.429441] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[   24.431321] wlan0: authenticated
[   24.437667] wlan0: associate with <MAC C-01 Home> (try 1/3)
[   24.440062] wlan0: RX AssocResp from <MAC C-01 Home> (capab=0x401 status=0 aid=8)
[   24.440264] wlan0: associated
[   34.446201] wlan0: deauthenticating from <MAC C-01 Home> by local choice (reason=3)
[   35.753724] wlan0: authenticate with <MAC C-01 Home>
[   35.770004] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[   35.771843] wlan0: authenticated
[   35.774700] wlan0: associate with <MAC C-01 Home> (try 1/3)
[   35.777297] wlan0: RX AssocResp from <MAC C-01 Home> (capab=0x401 status=0 aid=8)
[   35.777513] wlan0: associated
[  643.559339] wlan0: deauthenticated from <MAC C-01 Home> (Reason: 7)
[  643.598481] wlan0: authenticate with <MAC C-01 Home>
[  643.598787] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[  643.604888] wlan0: authenticated
[  643.606162] wlan0: associate with <MAC C-01 Home> (try 1/3)
[  643.610387] wlan0: RX AssocResp from <MAC C-01 Home> (capab=0x401 status=0 aid=8)
[  643.610641] wlan0: associated
[  713.319037] wlan0: deauthenticated from <MAC C-01 Home> (Reason: 7)
[  728.408563] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  738.592725] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  739.601499] wlan0: authenticate with <MAC C-01 Home>
[  739.935776] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[  740.038620] wlan0: send auth to <MAC C-01 Home> (try 2/3)
[  740.142648] wlan0: send auth to <MAC C-01 Home> (try 3/3)
[  740.246553] wlan0: authentication with <MAC C-01 Home> timed out
[  741.192350] wlan0: authenticate with <MAC C-01 Home>
[  741.201644] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[  741.203327] wlan0: authenticated
[  741.207022] wlan0: associate with <MAC C-01 Home> (try 1/3)
[  741.210702] wlan0: RX AssocResp from <MAC C-01 Home> (capab=0x401 status=0 aid=8)
[  741.211034] wlan0: associated
[  741.211120] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1438.357303] wlan0: deauthenticating from <MAC C-01 Home> by local choice (reason=3)
[ 1442.614329] rtlwifi: wireless switch is on
[ 1446.371442] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1447.389541] wlan0: authenticate with <MAC C-01 Home>
[ 1447.389841] wlan0: send auth to <MAC C-01 Home> (try 1/3)
[ 1447.396790] wlan0: authenticated
[ 1447.400822] wlan0: associate with <MAC C-01 Home> (try 1/3)
[ 1447.403732] wlan0: RX AssocResp from <MAC C-01 Home> (capab=0x401 status=0 aid=7)
[ 1447.403921] wlan0: associated
[ 1447.404002] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

======== Done ========
    
por Jeff Smith 20.07.2014 / 18:05

2 respostas

14

Primeiro, na mudança do seu roteador, 802.11bgn para 802.11bg .

Segundo, altere a criptografia do wep para apenas wpa2 (CCMP) (AES) e não (TKIP) se você tiver essa opção, ela funcionará melhor.

Terceiro, configure seu canal sem fio no roteador para 1 ou 11, salve a configuração do roteador e reinicie-a.

Em quarto lugar, vá para o gerenciador de rede no canto superior direito da tela e clique na guia editar conexões > sem fio e defina o IPV6 para ignorar.

Agora abra o terminal CTRL + ALT + _T e copie e cole o código a seguir, uma linha de cada vez, para precisão:

echo "options rtl8192ce swenc=1 ips=0" | sudo tee /etc/modprobe.d/rtl8192ce.conf
sudo modprobe -rfv rtl8192ce
sudo modprobe -v rtl8192ce
    
por Wild Man 21.07.2014 / 00:25
1

Eu tive o mesmo problema - eu era preguiçoso, então eu fiz apenas o número 4

"entre no gerenciador de rede no canto superior direito da tela e clique em editar conexões > guia sem fio e defina o IPV6 para ignorar"

... e funcionou! Obrigado

    
por Kate 10.07.2015 / 18:29