udev não funciona ao adicionar bInterfaceNumber

Question

Esta é minha regra do udev

SUBSYSTEM=="usb", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea71", ATTRS{serial}=="0", ATTRS{bInterfaceNumber}=="00",RUN+="/home/jamal/test.sh"

O script não está sendo executado quando eu adiciono a comparação bInterfaceNumber, quando eu removo, funciona ..

Aqui está a saída do udevadm info -a -n / dev / ttyUSB0

  looking at device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2.3/2-2.3:1.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2.3/2-2.3:1.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="cp210x"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2.3/2-2.3:1.0':
    KERNELS=="2-2.3:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="cp2108"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{authorized}=="1"
    ATTRS{supports_autosuspend}=="1"
    ATTRS{bAlternateSetting}==" 0"
    **ATTRS{bInterfaceNumber}=="00"**
    ATTRS{interface}=="CP2108 Interface 0"

  looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2/2-2.3':
    KERNELS=="2-2.3"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="2.3"
    ATTRS{idVendor}=="10c4"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 4"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="57"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="100mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="80"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0004"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="0"
    ATTRS{version}==" 2.00"
    ATTRS{urbnum}=="213"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Silicon Labs"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="ea71"
    ATTRS{bDeviceClass}=="00"
    ATTRS{product}=="CP2108 Quad USB to UART Bridge Controller"

  looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-2':
    KERNELS=="2-2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="2"
    ATTRS{idVendor}=="0e0f"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="3"
    ATTRS{configuration}=="VMware Virtual USB Hub"
    ATTRS{bMaxPower}=="0mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="7"
    ATTRS{bcdDevice}=="0100"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="1215"
    ATTRS{ltm_capable}=="no"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="0002"
    ATTRS{bDeviceClass}=="09"
    ATTRS{product}=="VMware Virtual USB Hub"

  looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2':
    KERNELS=="usb2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="0"
    ATTRS{idVendor}=="1d6b"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{authorized_default}=="1"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="1"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="0mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="2"
    ATTRS{interface_authorized_default}=="1"
    ATTRS{bcdDevice}=="0404"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="0000:02:00.0"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="32"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Linux 4.4.0-31-generic uhci_hcd"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="0001"
    ATTRS{bDeviceClass}=="09"
    ATTRS{product}=="UHCI Host Controller"

  looking at parent device '/devices/pci0000:00/0000:00:11.0/0000:02:00.0':
    KERNELS=="0000:02:00.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="uhci_hcd"
    ATTRS{irq}=="18"
    ATTRS{subsystem_vendor}=="0x15ad"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x0c0300"
    ATTRS{driver_override}=="(null)"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{local_cpus}=="0000000f"
    ATTRS{device}=="0x0774"
    ATTRS{enable}=="1"
    ATTRS{msi_bus}=="1"
    ATTRS{local_cpulist}=="0-3"
    ATTRS{vendor}=="0x15ad"
    ATTRS{subsystem_device}=="0x1976"
    ATTRS{numa_node}=="-1"
    ATTRS{d3cold_allowed}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:11.0':
    KERNELS=="0000:00:11.0"
    SUBSYSTEMS=="pci"
    DRIVERS==""
    ATTRS{irq}=="0"
    ATTRS{subsystem_vendor}=="0x15ad"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x060401"
    ATTRS{driver_override}=="(null)"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{local_cpus}=="0000000f"
    ATTRS{device}=="0x0790"
    ATTRS{enable}=="1"
    ATTRS{msi_bus}=="1"
    ATTRS{local_cpulist}=="0-3"
    ATTRS{vendor}=="0x15ad"
    ATTRS{subsystem_device}=="0x0790"
    ATTRS{numa_node}=="-1"
    ATTRS{d3cold_allowed}=="0"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Você pode observar que bInterfaceNumber é "00". Você pode por favor me dizer o erro que estou fazendo ..

Obrigado pelo seu tempo e esforço.

    

Answer 1

O problema é que os outros atributos estão no nível do dispositivo (idVendor, idProduct, serial) enquanto bInterfaceNumber está no nível da interface. Portanto, não há entrada do udev que corresponda a todas as condições de uma só vez.