Estou tentando conectar-me a uma rede Wi-Fi aberta com wifi-menu
de netctl
. quando eu corro
sudo wifi-menu wlan1
a rede que eu quero não está listada, mas muitas redes seguras wpa2 estão listadas. Eu acredito que deve haver um número de redes não seguras.
Quando eu corro
sudo iw dev wlan1 scan
Eu vejo algumas redes não seguras junto com a rede que quero wrbguest
BSS 20:3a:07:bb:77:2d(on wlan1)
TSF: 3295523973156 usec (38d, 03:25:23)
freq: 5300
beacon interval: 102 TUs
capability: ESS SpectrumMgmt RadioMeasure (0x1101)
signal: -91.00 dBm
last seen: 3273 ms ago
Information elements from Probe Response frame:
SSID: wrbguest
Supported rates: 9.0 12.0* 18.0 24.0 36.0 48.0 54.0
TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x1 Bitmap[0] 0x0
Country: US Environment: Indoor/Outdoor
Channels [36 - 48] @ 17 dBm
Channels [52 - 64] @ 24 dBm
Channels [100 - 116] @ 24 dBm
Channels [132 - 140] @ 24 dBm
Channels [149 - 165] @ 30 dBm
BSS Load:
* station count: 3
* channel utilisation: 16/255
* available admission capacity: 23437 [*32us]
HT capabilities:
Capabilities: 0x186e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT RX MCS rate indexes supported: 0-15
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 60
* secondary channel offset: above
* STA channel width: any
* RIFS: 0
* HT protection: no
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Extended capabilities: Proxy ARP Service, QoS Map, WNM-Notification
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
Como posso me conectar a essa rede aberta com wifi-menu
?
Tags wifi arch-linux netctl iw