Eu preciso instalar o driver de impressão digital do meu X1 carbono 5th gen no Ubuntu 16.04. Onde posso encontrar drivers para distribuições Linux?
Aqui estão as saídas de lspci
kasun@kasun-ThinkPad-X1-Carbon-5th:~$ lspci
00:00.0 Host bridge: Intel Corporation Device 5904 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)
00:08.0 System peripheral: Intel Corporation Sky Lake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)
00:1c.2 PCI bridge: Intel Corporation Device 9d12 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1d.0 PCI bridge: Intel Corporation Device 9d18 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d4e (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (4) I219-LM (rev 21)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
04:00.0 Network controller: Intel Corporation Device 24fd (rev 88)
05:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a804
kasun@kasun-ThinkPad-X1-Carbon-5th:~$
e o lsusb output
kasun@kasun-ThinkPad-X1-Carbon-5th:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 138a:0097 Validity Sensors, Inc.
Bus 001 Device 003: ID 13d3:5682 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
kasun@kasun-ThinkPad-X1-Carbon-5th:~$
O 138a: 0097 Validity Sensors, Inc. ainda está sendo "engenharia reversa" e ainda não é suportado pelo fácil de instalar fingerprint ou outros.
O seguinte é um WIP (Work In Progress) de Nikita Mikhailov:
sudo apt install git git clone https://github.com/nmikhailov/Validity90.git cd Validity90/libfprint ./configure make make check sudo make install Informações adicionais e discussões: