Em uma sessão de chat, tentamos várias coisas, mas finalmente descobrimos que a instalação de uma versão do kernel da versão principal 4.15 a partir daqui resolveu o problema: link
Não faço ideia de como começar (não sou um usuário experiente do Linux), mas a partir da pesquisa, fiz com que as pessoas relatassem esse problema, exibindo a saída syslog . Aqui está o meu:
[ 37.776184] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 37.921014] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
[ 37.921020] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 37.921024] usb 1-3: Product: USB2.0 Hub
[ 37.921027] usb 1-3: Manufacturer: GenesysLogic
[ 37.922385] hub 1-3:1.0: USB hub found
[ 37.924065] hub 1-3:1.0: 4 ports detected
[ 38.036247] usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
[ 38.059830] usb 2-3: New USB device found, idVendor=05e3, idProduct=0612
[ 38.059835] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 38.059839] usb 2-3: Product: USB3.0 Hub
[ 38.059842] usb 2-3: Manufacturer: GenesysLogic
[ 38.062473] hub 2-3:1.0: USB hub found
[ 38.062827] hub 2-3:1.0: 4 ports detected
[ 38.904259] usb 2-3.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 38.925001] usb 2-3.1: New USB device found, idVendor=0bda, idProduct=8153
[ 38.925007] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[ 38.925011] usb 2-3.1: Product: USB 10/100/1000 LAN
[ 38.925014] usb 2-3.1: Manufacturer: Realtek
[ 38.925017] usb 2-3.1: SerialNumber: 000001000000
[ 39.777550] usb 1-3-port2: Cannot enable. Maybe the USB cable is bad?
libinput error: libinput bug: timer: offset negative (-30854)
[ 43.996238] usb 2-3.1: Disable of device-initiated U1 failed.
[ 44.000181] usb 2-3.1: Disable of device-initiated U2 failed.
checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1"
bus: 2, device: 5 was not an MTP device
Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service'
Por favor, o que devo fazer em seguida?
Conforme solicitado por @ chili555, aqui está o comando output lsusb :
Bus 002 Device 003: ID 0bda:8153 Realtek Semiconductor Corp.
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2a Intel Corp.
Bus 001 Device 003: ID 0bda:58e6 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Saída para lsmod :
r8152 57344 0
mii 16384 2 usbnet,r8152
Saída para dmesg :
[ 8.163559] r8152 2-3.1:2.0: Unknown version 0x0000
[ 8.170641] usbcore: registered new interface driver r8152
Além disso, a interface Ethernet não está sendo exibida:
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 3086 bytes 303137 (303.1 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3086 bytes 303137 (303.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlo1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.26 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fda0:8d16:89c3:fc00:e49a:863b:d6e2:86ae prefixlen 64 scopeid 0x0<global>
inet6 fe80::b2bf:16eb:35f3:40ee prefixlen 64 scopeid 0x20<link>
inet6 fda0:8d16:89c3:fc00:11f4:4de3:5c3e:ef9d prefixlen 64 scopeid 0x0<global>
ether 90:61:ae:6c:53:ae txqueuelen 1000 (Ethernet)
RX packets 89776 bytes 82124598 (82.1 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40081 bytes 5131880 (5.1 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
@shadowbq Aqui está a saída para
modinfo /lib/modules/4.*-generic/kernel/drivers/net/usb/r8152.ko |grep version
:
version: v1.09.9
srcversion: EFE9F0107512003CA9626F7
version: v1.09.9
srcversion: EFE9F0107512003CA9626F7