Linux linux 3.0.0-14-genérico # 23-Ubuntu SMP seg 21 de novembro 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU / Linux
Oneiric Ocelot
Eu tenho uma placa de som Asus Xonar DG que tem várias saídas para escolher.
Às vezes, quero usar a saída de alto-falante normal e ver meus alto-falantes, mas outras vezes gostaria de poder usar a porta de áudio do painel frontal dos meus fones de ouvido.
Eu tentei mudar a porta de saída em pavucontrol e o painel de som Ubuntu embutido, mas assim que um fluxo de áudio começar a tocar a porta mudará de "fones de ouvido" de volta para "alto-falante" e o áudio continuará saindo dos meus alto-falantes.
Então eu caí no pacmd e tentei mudar ...
>>> list-sinks
3 sink(s) available.
index: 0
name: <alsa_output.pci-0000_03_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9050
volume: 0: 100% 1: 100%
0: -0.00 dB 1: -0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_03_00.1>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfbbfc000 irq 78"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:03:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card2"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "ATI Technologies Inc"
device.product.id = "aa50"
device.product.name = "Cypress HDMI Audio [Radeon HD 5800 Series]"
device.string = "hdmi:2"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Cypress HDMI Audio [Radeon HD 5800 Series] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100200"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
HDMI: HDMI (priority 0, available: no)
active port: <HDMI>
index: 1
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 101% 1: 101%
0: 0.25 dB 1: 0.25 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 1 <alsa_card.pci-0000_00_1b.0>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC889 Analog"
alsa.id = "ALC889 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xfb8f8000 irq 77"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "3a3e"
device.product.name = "82801JI (ICH10 Family) HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC889"
alsa.components = "HDA:10ec0889,104383c0,00100004"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900, available: unknown)
analog-output-headphones: Analog Headphones (priority 9000, available: no)
active port: <analog-output-headphones>
* index: 2
name: <alsa_output.pci-0000_08_01.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9059
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 3
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 36.00 .. 2000.00 ms
card: 2 <alsa_card.pci-0000_08_01.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Multichannel"
alsa.id = "Multichannel"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Xonar DG"
alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 17"
alsa.driver_name = "snd_oxygen"
device.bus_path = "pci-0000:08:01.0"
sysfs.path = "/devices/pci0000:00/0000:00:1e.0/0000:08:01.0/sound/card0"
device.bus = "pci"
device.vendor.id = "13f6"
device.vendor.name = "C-Media Electronics Inc"
device.product.id = "8788"
device.product.name = "CMI8788 [Oxygen HD Audio]"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "CMI8788 [Oxygen HD Audio] Analog Stereo"
alsa.mixer_name = "CMI8786"
alsa.components = "CS4245 CMI8786"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output;output-speaker: Analog Output / Speaker (priority 9910, available: unknown)
analog-output;output-headphones-1: Analog Output / Headphones 1 (priority 9909, available: unknown)
analog-output;output-headphones-2: Analog Output / Headphones 2 (priority 9908, available: unknown)
active port: <analog-output;output-speaker>
>>> set-sink-port 2 analog-output;output-headphones-1
Failed to set sink port to 'analog-output;output-headphones-1'.
Booo. Alguma ideia?
Nada aparece em / var / log / dmesg ou / var / log / syslog, não sei onde mais devo procurar ...