Gerenciamento de energia da placa wireless

0

Eu notei que quando meu computador está conectado, a força da rede sem fio aumenta. Estou assumindo que isso tem a ver com o gerenciamento de energia.

Existe uma maneira de desativar o Gerenciamento de energia sem fio?

Encontrei alguns posts que mostram hacks para desabilitar isso, mas qual é a melhor prática aqui? Não deve haver uma opção através do menu de energia que permite alternar isso?

EDITAR - ARQUIVOS E LOGS CONFORME SOLICITADO

/var/log/kern.log

Jul 11 11:45:27 CoolBreeze kernel: [    6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead.
Jul 11 11:45:27 CoolBreeze kernel: [    6.532080] [fglrx] Gart USWC size:1280 M.
Jul 11 11:45:27 CoolBreeze kernel: [    6.532084] [fglrx] Gart cacheable size:508 M.
Jul 11 11:45:27 CoolBreeze kernel: [    6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
Jul 11 11:45:27 CoolBreeze kernel: [    6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 
Jul 11 11:45:27 CoolBreeze kernel: [    6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
Jul 11 11:45:38 CoolBreeze kernel: [   17.423743] eth1: no IPv6 routers present
Jul 11 11:46:37 CoolBreeze kernel: [   75.836426] warning: 'proftpd' uses 32-bit capabilities (legacy support in use)
Jul 11 11:46:37 CoolBreeze kernel: [   75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1
Jul 11 11:54:25 CoolBreeze kernel: [  543.679614] eth1: no IPv6 routers present

dmesg

[    1.411959] ACPI: Power Button [PWRB]
[    1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.412054] ACPI: Sleep Button [SLPB]
[    1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.412765] ACPI: Lid Switch [LID0]
[    1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.412874] ACPI: Power Button [PWRF]
[    1.412996] ACPI: Fan [FAN0] (off)
[    1.413068] ACPI: Fan [FAN1] (off)
[    1.419493] thermal LNXTHERM:00: registered as thermal_zone0
[    1.419498] ACPI: Thermal Zone [TZ00] (27 C)
[    1.421913] thermal LNXTHERM:01: registered as thermal_zone1
[    1.421918] ACPI: Thermal Zone [TZ01] (61 C)
[    1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.421986] ACPI: Battery Slot [BAT0] (battery present)
[    1.422062] ERST: Table is not found!
[    1.422067] GHES: HEST is not enabled!
[    1.422158] isapnp: Scanning for PnP cards...
[    1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.434620] ACPI: Battery Slot [BAT0] (battery present)
[    1.736355] Freeing initrd memory: 14352k freed
[    1.777846] isapnp: No Plug & Play device found
[    1.963650] Linux agpgart interface v0.103
[    1.967148] brd: module loaded
[    1.968866] loop: module loaded
[    1.969134] ahci 0000:00:1f.2: version 3.0
[    1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.969277] ahci: SSS flag set, parallel bus scan disabled
[    1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
[    1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.969338] ahci 0000:00:1f.2: setting latency timer to 64
[    1.983340] scsi0 : ahci
[    1.983515] scsi1 : ahci
[    1.983670] scsi2 : ahci
[    1.983829] scsi3 : ahci
[    1.983985] scsi4 : ahci
[    1.984145] scsi5 : ahci
[    1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
[    1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
[    1.984282] ata3: DUMMY
[    1.984285] ata4: DUMMY
[    1.984288] ata5: DUMMY
[    1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
[    1.985150] Fixed MDIO Bus: probed
[    1.985192] tun: Universal TUN/TAP device driver, 1.6
[    1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.985285] PPP generic driver version 2.4.2
[    1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.985666] ehci_hcd 0000:00:1a.0: debug port 2
[    1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
[    2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.002447] hub 1-0:1.0: USB hub found
[    2.002455] hub 1-0:1.0: 3 ports detected
[    2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.002775] ehci_hcd 0000:00:1d.0: debug port 2
[    2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
[    2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.022401] hub 2-0:1.0: USB hub found
[    2.022409] hub 2-0:1.0: 3 ports detected
[    2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.022599] uhci_hcd: USB Universal Host Controller Interface driver
[    2.022720] usbcore: registered new interface driver libusual
[    2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.036096] mousedev: PS/2 mouse device common for all mice
[    2.036710] rtc_cmos 00:07: RTC can wake from S4
[    2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.037503] device-mapper: uevent: version 1.0.3
[    2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    2.037725] EISA: Probing bus 0 at eisa.0
[    2.037729] EISA: Cannot allocate resource for mainboard
[    2.037734] Cannot allocate resource for EISA slot 1
[    2.037738] Cannot allocate resource for EISA slot 2
[    2.037741] Cannot allocate resource for EISA slot 3
[    2.037745] Cannot allocate resource for EISA slot 4
[    2.037749] Cannot allocate resource for EISA slot 5
[    2.037753] Cannot allocate resource for EISA slot 6
[    2.037756] Cannot allocate resource for EISA slot 7
[    2.037760] Cannot allocate resource for EISA slot 8
[    2.037764] EISA: Detected 0 cards.
[    2.037782] cpufreq-nforce2: No nForce2 chipset.
[    2.038264] cpuidle: using governor ladder
[    2.039015] cpuidle: using governor menu
[    2.039019] EFI Variables Facility v0.08 2004-May-17
[    2.040061] TCP cubic registered
[    2.041438] NET: Registered protocol family 10
[    2.043814] NET: Registered protocol family 17
[    2.043823] Registering the dns_resolver key type
[    2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.044336] Using IPI No-Shortcut mode
[    2.045620] PM: Hibernation image not present or could not be loaded.
[    2.045644] registered taskstats version 1
[    2.073070]   Magic number: 4:976:796
[    2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323)
[    2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.076658] EDD information not available.
[    2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100
[    2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.303143] ata1.00: configured for UDMA/100
[    2.303453] scsi 0:0:0:0: Direct-Access     ATA      M4-CT128M4SSD2   000F PQ: 0 ANSI: 5
[    2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.304213] sd 0:0:0:0: [sda] Write Protect is off
[    2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.306818]  sda: sda1 sda2 < sda5 >
[    2.308780] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.318162] Refined TSC clocksource calibration: 1595.999 MHz.
[    2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.318178] Switching to clocksource tsc
[    2.450939] hub 1-1:1.0: USB hub found
[    2.451121] hub 1-1:1.0: 6 ports detected
[    2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
[    2.636152] ata2.00: applying bridge limits
[    2.649711] ata2.00: configured for UDMA/100
[    2.653762] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
[    2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.694649] hub 2-1:1.0: USB hub found
[    2.694840] hub 2-1:1.0: 8 ports detected
[    2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[    2.981454] ata6: SATA link down (SStatus 0 SControl 300)
[    2.982597] Freeing unused kernel memory: 740k freed
[    2.983523] Write protecting the kernel text: 5816k
[    2.983808] Write protecting the kernel read-only data: 2376k
[    2.983811] NX-protecting the kernel data: 4424k
[    3.014594] udevd[127]: starting version 175
[    3.068925] sdhci: Secure Digital Host Controller Interface driver
[    3.068932] sdhci: Copyright(c) Pierre Ossman
[    3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
[    3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[    3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64
[    3.069816] mmc0: no vmmc regulator found
[    3.069877] Registered led device: mmc0::
[    3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
[    3.071078] tg3.c:v3.121 (November 2, 2011)
[    3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.071269] tg3 0000:0b:00.0: setting latency timer to 64
[    3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64
[    3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    3.078517] EXT4-fs (sda1): write access will be enabled during recovery
[    3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6
[    3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
[    3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs
[    3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710
[    3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071
[    3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711
[    3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709
[    3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708
[    3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707
[    3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706
[    3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705
[    3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551
[    3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523
[    3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520
[    3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901
[    3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272
[    3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266
[    3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261
[    3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256
[    3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255
[    3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072
[    3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050
[    3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064
[    3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394
[    3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390
[    3.390745] EXT4-fs (sda1): 22 orphan inodes deleted
[    3.390748] EXT4-fs (sda1): recovery complete
[    3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400
[    3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.929965] udevd[400]: starting version 175
[    3.933581] Adding 6278140k swap on /dev/sda5.  Priority:-1 extents:1 across:6278140k SS
[    3.945183] lp: driver loaded but no devices found
[    3.999389] wmi: Mapper loaded
[    4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[    4.016702] ite_cir: Using model: ITE8708 CIR transceiver
[    4.016706] ite_cir: TX-capable: 1
[    4.016710] ite_cir: Sample period (ns): 8680
[    4.016713] ite_cir: TX carrier frequency (Hz): 38000
[    4.016716] ite_cir: TX duty cycle (%): 33
[    4.016719] ite_cir: RX low carrier frequency (Hz): 0
[    4.016722] ite_cir: RX high carrier frequency (Hz): 0
[    4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    4.025691] Disabling lock debugging due to kernel taint
[    4.027410] IR NEC protocol handler initialized
[    4.030250] lib80211: common routines for IEEE802.11 drivers
[    4.030257] lib80211_crypt: registered algorithm 'NULL'
[    4.036024] IR RC5(x) protocol handler initialized
[    4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    4.039006] acpi device:03: registered as cooling_device10
[    4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[    4.039261] ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
[    4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.050215] wl 0000:05:00.0: setting latency timer to 64
[    4.052252] Registered IR keymap rc-rc6-mce
[    4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6
[    4.054614] IR RC6 protocol handler initialized
[    4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[    4.054839] ite_cir: driver has been successfully loaded
[    4.057338] IR JVC protocol handler initialized
[    4.061553] IR Sony protocol handler initialized
[    4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7
[    4.066724] IR MCE Keyboard/mouse protocol handler initialized
[    4.072580] lirc_dev: IR Remote Control driver registered, major 250 
[    4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[    4.073286] IR LIRC bridge handler initialized
[    4.077849] Linux video capture interface: v2.00
[    4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f)
[    4.085492] EDAC MC: Ver: 2.1.0
[    4.087138] lib80211_crypt: registered algorithm 'TKIP'
[    4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
[    4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[    4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[    4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9
[    4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser"
[    4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser"
[    4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser"
[    4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[    4.122096] usbcore: registered new interface driver uvcvideo
[    4.122100] USB Video Class driver (1.1.1)
[    4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes.
[    4.129678] [fglrx]   vendor: 1002 device: 68c0 count: 1
[    4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[    4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.132024] pci 0000:02:00.0: setting latency timer to 64
[    4.133712] [fglrx] Kernel PAT support is enabled
[    4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[    4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38
[    4.184133] device-mapper: multipath: version 1.3.0 loaded
[    4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11
[    4.292402] Bluetooth: Core ver 2.16
[    4.292449] NET: Registered protocol family 31
[    4.292454] Bluetooth: HCI device and connection manager initialized
[    4.292459] Bluetooth: HCI socket layer initialized
[    4.292463] Bluetooth: L2CAP socket layer initialized
[    4.292473] Bluetooth: SCO socket layer initialized
[    4.296333] Bluetooth: RFCOMM TTY layer initialized
[    4.296342] Bluetooth: RFCOMM socket layer initialized
[    4.296345] Bluetooth: RFCOMM ver 1.11
[    4.313586] ppdev: user-space parallel port driver
[    4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.316625] Bluetooth: BNEP filters: protocol multicast
[    4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser"
[    4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser"
[    4.425757] init: failsafe main process (898) killed by TERM signal
[    4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser"
[    4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser"
[    4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser"
[    4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser"
[    4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[    4.510065] vesafb: scrolling: redraw
[    4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    4.510084] mtrr: no more MTRRs available
[    4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k
[    4.515203] Console: switching to colour frame buffer device 144x54
[    4.515278] fb0: VESA VGA frame buffer device
[    4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X
[    4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[    5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[    5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    5.519573] [fglrx] ATIF platform detected with notification ID: 0x81
[    6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X
[    6.393137] [fglrx] Firegl kernel thread PID: 1305
[    6.393306] [fglrx] Firegl kernel thread PID: 1306
[    6.393472] [fglrx] Firegl kernel thread PID: 1307
[    6.393726] [fglrx] IRQ 49 Enabled
[    6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead.
[    6.532080] [fglrx] Gart USWC size:1280 M.
[    6.532084] [fglrx] Gart cacheable size:508 M.
[    6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[    6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 
[    6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
[   17.423743] eth1: no IPv6 routers present
[   75.836426] warning: 'proftpd' uses 32-bit capabilities (legacy support in use)
[   75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1
[  543.679614] eth1: no IPv6 routers present

lsmod

Module                  Size  Used by
kvm_intel             127560  0 
kvm                   359456  1 kvm_intel
joydev                 17393  0 
vesafb                 13516  1 
parport_pc             32114  0 
bnep                   17830  2 
ppdev                  12849  0 
rfcomm                 38139  0 
bluetooth             158438  10 bnep,rfcomm
dell_wmi               12601  0 
sparse_keymap          13658  1 dell_wmi
binfmt_misc            17292  1 
dell_laptop            17767  0 
dcdbas                 14098  1 dell_laptop
dm_multipath           22710  0 
fglrx                2909855  143 
snd_hda_codec_hdmi     31775  1 
psmouse                72919  0 
serio_raw              13027  0 
i7core_edac            23382  0 
lib80211_crypt_tkip    17275  0 
edac_core              46858  1 i7core_edac
uvcvideo               67203  0 
snd_hda_codec_idt      60251  1 
videodev               86588  1 uvcvideo
ir_lirc_codec          12739  0 
lirc_dev               18700  1 ir_lirc_codec
ir_mce_kbd_decoder     12681  0 
snd_seq_midi           13132  0 
ir_sony_decoder        12462  0 
ir_jvc_decoder         12459  0 
snd_rawmidi            25424  1 snd_seq_midi
ir_rc6_decoder         12459  0 
wl                   2646601  0 
snd_seq_midi_event     14475  1 snd_seq_midi
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
ir_rc5_decoder         12459  0 
video                  19068  0 
snd_hda_intel          32765  5 
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_hda_codec         109562  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
rc_rc6_mce             12454  0 
lib80211               14040  2 lib80211_crypt_tkip,wl
snd_hwdep              13276  1 snd_hda_codec
ir_nec_decoder         12459  0 
snd_pcm                80845  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
ite_cir                24743  0 
rc_core                21263  10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir
snd_timer              28931  2 snd_seq,snd_pcm
wmi                    18744  1 dell_wmi
snd                    62064  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
mac_hid                13077  0 
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
coretemp               13269  0 
lp                     17455  0 
parport                40930  3 parport_pc,ppdev,lp
tg3                   141369  0 
firewire_ohci          40172  0 
sdhci_pci              18324  0 
firewire_core          56906  1 firewire_ohci
sdhci                  28241  1 sdhci_pci
crc_itu_t              12627  1 firewire_core

lshw

  *-network               
       description: Wireless interface
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:05:00.0
       logical name: eth1
       version: 01
       serial: 70:f1:a1:a9:54:31
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11
       resources: irq:17 memory:f0900000-f0903fff
  *-network
       description: Ethernet interface
       product: NetLink BCM5784M Gigabit Ethernet PCIe
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:0b:00.0
       logical name: eth0
       version: 10
       serial: b8:ac:6f:71:02:a6
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:48 memory:f0d00000-f0d0ffff
    
por penner 11.07.2012 / 21:24

3 respostas

3

edite o seguinte arquivo digitando:

sudo gedit /etc/rc.local

adicione as linhas para desabilitar o wireless wlan0: sleep 10 (isto dá ao dongle wireless / cartão tempo para carregar, antes de executar o comando abaixo) "iwconfig wlan0 power off"

importante! verifique se há uma linha no final que diz:

"exit 0"

isto irá ignorar quaisquer erros e permitir que o sistema continue a arrancar.

você pode adicionar outros comandos de inicialização aqui também - muito útil.

deve ficar assim:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
sleep 10
iwconfig wlan0 power off
exit 0

link

    
por penner 11.07.2012 / 22:24
0

Eu tive o mesmo problema há alguns anos e acho que isso ainda deve funcionar: link

    
por Kalle Elmér 11.07.2012 / 22:01
0

A prática recomendada é criar (como root) um arquivo (digamos, block-powermanagement ) no diretório /etc/pm/config.d/ com a linha HOOK_BLACKLIST="$HOOK_BLACKLIST wireless" .

echo HOOK_BLACKLIST=\"\$HOOK_BLACKLIST wireless\" | sudo tee /etc/pm/config.d/block-powermanagement

deve fazer isso.

Fontes: link e alguns outros.

    
por S Prasanth 12.11.2013 / 16:37