Seagate Backup Plus 1TB exibido no fdisk, mas não no nautilus

0

postando aqui porque de repente, meu disco rígido (ver título) parou de aparecer no nautilus, fiz uma pequena pesquisa e executei fdisk -l e dmesg (saída no bloco de código abaixo) e a saída está mostrando detectado e perfeitamente bem, se alguém tiver uma idéia do que eu posso tentar fazer para corrigir isso seria ótimo.

root@anony-All-Series:~# fdisk -l
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: DD09C100-17CE-4B60-B935-F4F2E5899562

Device       Start        End    Sectors  Size Type
/dev/sda1     2048    1050623    1048576  512M EFI System
/dev/sda2  1050624 1953523711 1952473088  931G Linux filesystem

Disk /dev/sdb: 931.5 GiB, 1000204885504 bytes, 1953525167 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
Disklabel type: dos
Disk identifier: 0x9c948eb2

Device     Boot Start        End    Sectors   Size Id Type
/dev/sdb1  *     2048 1953525166 1953523119 931.5G  b W95 FAT32

Saída de dmesg :

[16315.551381] usb 3-6: new high-speed USB device number 9 using xhci_hcd
[16315.693491] usb 3-6: New USB device found, idVendor=0bc2, idProduct=ab24
[16315.693496] usb 3-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[16315.693499] usb 3-6: Product: BUP Slim SL
[16315.693502] usb 3-6: Manufacturer: Seagate
[16315.693505] usb 3-6: SerialNumber: NA7XHAYA
[16315.695051] scsi host6: uas
[16315.696123] scsi 6:0:0:0: Direct-Access     Seagate  BUP Slim SL      0304 PQ: 0 ANSI: 6
[16315.739817] sd 6:0:0:0: Attached scsi generic sg2 type 0
[16315.740118] sd 6:0:0:0: [sdb] Spinning up disk...
[16316.771409] .
[16317.795386] .
[16317.795511] ready
[16317.796224] sd 6:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[16317.796228] sd 6:0:0:0: [sdb] 2048-byte physical blocks
[16318.076320] sd 6:0:0:0: [sdb] Write Protect is off
[16318.076322] sd 6:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[16318.076777] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[16318.110283]  sdb: sdb1
[16318.112232] sd 6:0:0:0: [sdb] Attached SCSI disk
    
por Orion_2.0 07.12.2017 / 21:25

0 respostas