Então, eu tenho um par de partições ext4 no meu disco rígido, e outra vez, eu tenho uma velocidade de cópia de 8-12 Mb / s, mas agora é em torno de 1-2 Mb / s, e porque eu gostaria para copiar 70 GB, é uma maneira de diminuir.
Qualquer ajuda é muito apreciada. Eu tenho uma nova instalação do Ubuntu 16.04.02, e também tentei montá-lo manualmente usando mount /dev/sda4 /media/user/ .
Provavelmente isso é culpa minha?
EDITAR
nota:
Eu não acho que os arquivos sejam tão pequenos, mas são todos diferentes, muitos em torno de 1MB, muitos pequenos arquivos de txt e programas em torno de 5-100 KB, e até mesmo algumas isos do Ubuntu que eu baixei. ., mas eles não são tão pequenos, como por exemplo, contendo um caractere e ter um nome de arquivo que seja o maior tempo possível ...
Saída do smartctl -a / dev / sda4:
Infos:
=== START OF INFORMATION SECTION ===
Model Family: Seagate Laptop Thin HDD
Device Model: ST500LT012-1DG142
Serial Number: W3PFMRFQ
LU WWN Device Id: 5 000c50 08293eb8d
Firmware Version: 0002LVM1
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Mar 25 13:03:51 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 101) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 034 Pre-fail Always - 183936888
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 3023
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 64977593
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5283
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1844
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 054 045 Old_age Always - 36 (Min/Max 22/37)
191 G-Sense_Error_Rate 0x0032 099 099 000 Old_age Always - 2489
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 522
193 Load_Cycle_Count 0x0032 059 059 000 Old_age Always - 82582
194 Temperature_Celsius 0x0022 036 046 000 Old_age Always - 36 (0 15 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.