Eu li muitas das postagens e nenhuma ajuda. Procurando por alguém para percorrer os passos um a um. Obrigado antecipadamente.
*-network
description: Ethernet interface
product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: enp1s0
version: 05
serial: b8:70:f4:57:de:ca
size: 10Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:24 ioport:6000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff
*-network DISABLED
description: Wireless interface
product: Centrino Advanced-N + WiMAX 6250 [Kilmer Peak]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:06:00.0
logical name: wlp6s0
version: 5f
serial: 00:23:15:cf:db:f8
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-47-generic firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
resources: irq:28 memory:d4600000-d4601fff
*-network DISABLED
description: Ethernet interface
physical id: 2
logical name: enx64d4da23e6fb
serial: 64:d4:da:23:e6:fb
capabilities: ethernet physical
configuration: driver=i2400m_usb firmware=i6050-fw-usb-1.5.sbcf link=no
rfkill
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: i2400m-usb:1-1.6:1.0: WiMAX
Soft blocked: yes
Hard blocked: no