Instale o driver para o adaptador sem fio tl-wn8200nd no Ubuntu 16.04

0

Estou tentando instalar o driver para o meu adaptador sem fio TP-Link TL-WN8200ND no Ubuntu 16.04.

Sem instalar nenhum driver manualmente, redes sem fio estão presentes, mas quando eu conecto ele mostra um status de desconectado e não funciona.

Suponho que este seja um problema relacionado com o driver, por isso tentei diferentes soluções que encontrei:

  1. O adaptador wireless TL-WN8200ND é suportado no linux?

O driver fornecido rtl8192cu-dkms não estava presente no repositório.

  1. Compile e instale o driver rtl8192cu

Ele foi instalado corretamente, mas o problema persistiu.

  1. Eu também tentei instalar rtlwifi-new-dkms , mas o problema persistiu.

Eu não sei o que fazer a seguir? Há algo que estou fazendo errado ou faltando algum passo?

Estas são as informações relacionadas ao hardware sem fio.

O resultado de sudo lshw -class network é

  *-network               
       description: Ethernet interface
       product: 82545EM Gigabit Ethernet Controller (Copper)
       vendor: Intel Corporation
       physical id: 1
       bus info: pci@0000:02:01.0
       logical name: ens33
       version: 01
       serial: 00:0c:29:53:6d:a1
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 66MHz
       capabilities: pm pcix bus_master cap_list rom ethernet physical logical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full ip=192.168.147.129 latency=0 link=yes mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s
       resources: irq:19 memory:fd5c0000-fd5dffff memory:fdff0000-fdffffff ioport:2000(size=64) memory:fd500000-fd50ffff
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:1
       logical name: wlx60e327096b82
       serial: 60:e3:27:09:6b:82
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192cu driverversion=4.4.0-47-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn

O resultado de lsusb

Bus 001 Device 002: ID 2357:0100  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

O resultado de rfkill list all

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

O resultado de lspci é

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:07.7 System peripheral: VMware Virtual Machine Communication Interface (rev 10)
00:0f.0 VGA compatible controller: VMware SVGA II Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 PCI bridge: VMware PCI bridge (rev 02)
00:15.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:15.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:16.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:17.7 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.0 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.1 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.2 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.3 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.4 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.5 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.6 PCI bridge: VMware PCI Express Root Port (rev 01)
00:18.7 PCI bridge: VMware PCI Express Root Port (rev 01)
02:00.0 USB controller: VMware USB1.1 UHCI Controller
02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
02:02.0 Multimedia audio controller: Ensoniq ES1371 / Creative Labs CT2518/ES1373 (rev 02)
02:03.0 USB controller: VMware USB2 EHCI Controller
02:05.0 SATA controller: VMware SATA AHCI controller
    
por Blue whale 16.11.2016 / 05:18

1 resposta

0

Eu encontrei este procedimento para instalar corretamente o driver para o TP-LINK WN8200ND. Use este repositório do GitHub .

  1. Siga o procedimento de instalação.
  2. Reinicie a máquina (Meu é o Ubuntu 16.04.03 LTS)
  3. Plug-in USBWIFI

e voila funciona :))

    
por Erca Mutlu 21.11.2017 / 19:16