Ubuntu Instale o firmware para ath10k_pci

2

Estou usando o Ubuntu 18.04, como posso instalar o firmware do ath10k_pci? Existe um post para o U14.04, mas não tenho certeza se posso fazer o mesmo nas respostas. thx for help

[    4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[    4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[    4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2

para dmesg | grep ath10k - >

[    3.792117] ath10k_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    3.792420] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    4.074863] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[    4.074873] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[    4.076874] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA9377/hw1.0/firmware-6.bin failed with error -2
[    4.078895] ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
[    4.078898] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[    4.079373] ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f
[    4.146481] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[    4.780156] ath10k_pci 0000:03:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    4.790875] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[  964.323485] ath10k_pci 0000:03:00.0: failed to install key for vdev 0 peer 9c:c7:a6:92:ce:82: -110
    
por leandro 10.06.2018 / 16:58

1 resposta

0

Parece que está tudo bem com o seu dispositivo.

Os desenvolvedores do kernel adicionaram código para procurar alguns arquivos que ainda não existem no futuro.

ath10k não funciona sem firmware. No seu caso, é carregado.

Nada precisa ser feito.

    
por Pilot6 10.06.2018 / 20:12