O leitor de cartões parece não funcionar

Question

Meu laptop Lenovo W520 tem esse problema.

Eu tenho a seguinte saída nos comandos usados aqui

nishant@nishant-ThinkPad-W520:~$ lsusb
Bus 002 Device 003: ID 17ef:1003 Lenovo Integrated Smart Card Reader
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Bus 001 Device 003: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

$ sudo lsblk -f
NAME   FSTYPE  LABEL UUID                                 MOUNTPOINT
loop0  squashf                                            /snap/gnome-characters
loop1  squashf                                            /snap/vscode/37
loop2  squashf                                            /snap/gnome-logs/25
loop3  squashf                                            /snap/gnome-system-mon
loop4  squashf                                            /snap/gnome-calculator
loop5  squashf                                            /snap/core/4486
loop6  squashf                                            /snap/gnome-3-26-1604/
sda                                                       
└─sda1 ext4          7889ad88-06a3-4957-a85f-2da6f9cb2b1e /
sr0                                                       

$ sudo dmesg | tail -n 50
[    5.593030] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    5.593104] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[    5.593164] usbcore: registered new interface driver uvcvideo
[    5.593164] USB Video Class driver (1.1.1)
[    5.623082] kvm: disabled by bios
[    5.634353] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.681271] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.697779] intel_rapl: Found RAPL domain package
[    5.697781] intel_rapl: Found RAPL domain core
[    5.697782] intel_rapl: Found RAPL domain uncore
[    5.697786] intel_rapl: RAPL package 0 domain package locked by BIOS
[    5.704438] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.721084] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    5.721550] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    5.721551] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.721552] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    5.721553] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    5.721554] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    5.721556] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    5.721557] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    5.721558] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    5.722863] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    5.736187] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.736231] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.736273] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.736312] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    6.372607] random: crng init done
[    7.148238] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.148241] Bluetooth: BNEP filters: protocol multicast
[    7.148252] Bluetooth: BNEP socket layer initialized
[    7.389185] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    7.604341] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    7.607926] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.613507] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[    7.856254] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[    7.958132] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.100499] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    9.684538] Bluetooth: RFCOMM TTY layer initialized
[    9.684544] Bluetooth: RFCOMM socket layer initialized
[    9.684548] Bluetooth: RFCOMM ver 1.11
[   10.695673] rfkill: input handler disabled
[   11.273094] wlp3s0: authenticate with 9c:d6:43:d7:62:ba
[   11.274999] wlp3s0: send auth to 9c:d6:43:d7:62:ba (try 1/3)
[   11.276728] wlp3s0: authenticated
[   11.276895] wlp3s0: waiting for beacon from 9c:d6:43:d7:62:ba
[   11.344032] wlp3s0: associate with 9c:d6:43:d7:62:ba (try 1/3)
[   11.348210] wlp3s0: RX AssocResp from 9c:d6:43:d7:62:ba (capab=0x431 status=0 aid=1)
[   11.360030] wlp3s0: associated
[   11.376209] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   16.320971] thinkpad_acpi: EC reports that Thermal Table has changed

Como faço para gravar essa ...? : /

    

Answer 1

Como você se mexe em qual deles ? Seu laptop tem problema qual ? Sua não pergunta fala sobre um "leitor de cartão" no título e nada mais. O Thinkpad W520 está listado com os seguintes periféricos:

4-in-1 Media Card Reader slot
One ExpressCard slot
One SmartCard slot

Você escreve sobre "lsusb", mas isso somente é relevante em relação ao leitor de SmartCard (que lê os dados do chip em cartões de crédito e seu tipo).

O uso de um leitor de SmartCard requer um software específico e apenas alguns tipos de smart chard são suportados pelo GNU / Linux. Listar os dispositivos de bloco me faz suspeitar que você não está realmente falando sobre o leitor de cartão inteligente, mas provavelmente está interessado no leitor de cartão de mídia 4-em-1 (que seria sobre cartões SD e seu tipo).

No entanto, as informações sobre esse leitor só apareceriam usando

lspci

ou similar, pois pelo menos o leitor interno geralmente não é conectado via USB, mas através de uma pista expressa PCI.

Então o que você está realmente tentando fazer usando qual leitor e qual mídia e quais são os sintomas que fazem você pensar que algo está errado?