Problema para re-instalar o xubuntu a partir do usb inicializável
Depois que a corrente explodiu.
Reiniciando o pc recebi a mensagem:
falha lendo o setor 0x802 do hd0 e entrando no modo de recuperação.
Pesquisando em algum fórum eu não encontrei uma solução concreta para o meu problema, mas pelo que eu vi, não foi um problema grub ou um problema de partição.
Eu não me preocupo com os meus dados porque eu sou um programador js e tenho todo o meu trabalho em servidores, então eu decidi reinstalar o xubuntu 17.10 do usb. E aqui eu começo a suar.
O boot start regular, não há problema em vir aqui no Live from usb, mas quando eu tento instalar o xubuntu ele faz muito tempo para checá-lo (cerca de 10 min a cada windows da instalação) do que quando ele vai criar o sistema de arquivos xt4 parar e erro.
Eu tentei algumas maneiras, mas não posso consertar nada por enquanto.
Alguém pode me ajudar?
adicionando informações do pc
root@xubuntu:/home/xubuntu# sudo smartctl -a /dev/sda1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.13.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M8 (AF)
Device Model: SAMSUNG HN-M101MBB
Serial Number: S2RQJ9ABB02231
LU WWN Device Id: 5 0024e9 2066eb9b7
Firmware Version: 2AR10001
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Mar 27 08:43:55 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (13440) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 224) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 11355
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3459
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5876
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 17979
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 096 096 000 Old_age Always - 4278
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4924
191 G-Sense_Error_Rate 0x0022 076 076 000 Old_age Always - 251461
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 037 000 Old_age Always - 32 (Min/Max 0/63)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 12
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 28
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 2850
223 Load_Retry_Count 0x0032 096 096 000 Old_age Always - 4278
225 Load_Cycle_Count 0x0032 069 069 000 Old_age Always - 314604
SMART Error Log Version: 1
ATA Error Count: 2062 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2062 occurred at disk power-on lifetime: 17979 hours (749 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 e0 00 00:00:05.158 READ DMA
ef 10 02 00 00 00 a0 00 00:00:05.158 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:05.158 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:05.158 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:05.158 SET FEATURES [Set transfer mode]
Error 2061 occurred at disk power-on lifetime: 17979 hours (749 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 e0 00 00:00:05.154 READ DMA
25 00 08 a0 61 70 e0 00 00:00:05.154 READ DMA EXT
25 00 08 f8 69 70 e0 00 00:00:05.154 READ DMA EXT
25 00 08 d0 69 70 e0 00 00:00:05.154 READ DMA EXT
25 00 08 e0 69 70 e0 00 00:00:05.154 READ DMA EXT
Error 2060 occurred at disk power-on lifetime: 17979 hours (749 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 00 08 00 e0 Error: UNC 2 sectors at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 00 08 00 e0 00 00:00:04.409 READ DMA
ef 10 02 00 00 00 a0 00 00:00:04.409 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:04.409 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:04.409 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:04.409 SET FEATURES [Set transfer mode]
Error 2059 occurred at disk power-on lifetime: 17979 hours (749 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 08 00 e0 Error: UNC 2 sectors at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 02 08 00 e0 00 00:00:04.404 READ DMA
ef 10 02 00 00 00 a0 00 00:00:04.404 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:04.404 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:04.404 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:04.404 SET FEATURES [Set transfer mode]
Error 2058 occurred at disk power-on lifetime: 17979 hours (749 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 08 00 e0 Error: UNC 2 sectors at LBA = 0x00000802 = 2050
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 02 08 00 e0 00 00:00:04.400 READ DMA
ef 10 02 00 00 00 a0 00 00:00:04.400 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:04.400 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:04.400 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:04.400 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 17979 2048
# 2 Extended offline Completed: read failure 90% 17979 2048
# 3 Extended offline Completed: read failure 90% 17973 2048
# 4 Short offline Completed: read failure 90% 17973 2048
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.