Eu tenho uma rede wifi doméstica com 2 sistemas linux e 1 mac. Eu posso alcançar cada linux do mac e outras formas, mas uma tentativa de pingar um linux de outro linux resulta com o erro "Destination Host Unreachable" em ambos os sistemas.
O que pode causar isso e como corrigi-lo? Eu desabilitei todos os firewalls em ambos os sistemas Linux:
iptables -nL
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ainda não ajudou muito.
Detalhes:
pc (ubuntu 16.04):
ifconfig:
wlp2s0 Link encap:Ethernet HWaddr ac:7b:a1:c5:ea:0e
inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0
route:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.254 0.0.0.0 UG 600 0 0 wlp2s0
192.168.1.0 * 255.255.255.0 U 600 0 0 wlp2s0
arp:
Address HWtype HWaddress Flags Mask Iface
192.168.1.254 ether 58:90:43:49:eb:6b C wlp2s0
192.168.1.77 ether 34:02:86:aa:89:85 C wlp2s0
192.168.1.69 ether 18:65:90:dc:04:55 C wlp2s0
laptop (ubuntu 16.04):
ifconfig:
wlan0 Link encap:Ethernet HWaddr 34:02:86:aa:89:85
inet addr:192.168.1.77 Bcast:192.168.1.255 Mask:255.255.255.0
route:
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.254 0.0.0.0 UG 600 0 0 wlan0
192.168.1.0 * 255.255.255.0 U 600 0 0 wlan0
arp:
Address HWtype HWaddress Flags Mask Iface
192.168.1.83 ether ac:7b:a1:c5:ea:0e C wlan0
192.168.1.69 ether 18:65:90:dc:04:55 C wlan0
192.168.1.254 ether 58:90:43:49:eb:6b C wlan0
mac (10.13.3):
ifconfig:
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 18:65:90:dc:04:55
inet6 fe80::80f:e846:2fe6:90c5%en0 prefixlen 64 secured scopeid 0x5
inet 192.168.1.69 netmask 0xffffff00 broadcast 192.168.1.255
route:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.1.254 UGSc 105 0 en0
192.168.1 link#5 UCS 4 0 en0
192.168.1.69/32 link#5 UCS 0 0 en0
192.168.1.77 34:2:86:aa:89:85 UHLWI 0 510 en0 1154
192.168.1.83 ac:7b:a1:c5:ea:e UHLWIi 2 55 en0 915
192.168.1.254/32 link#5 UCS 1 0 en0
192.168.1.254 58:90:43:49:eb:6b UHLWIir 39 14075 en0 1169
192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en0
255.255.255.255/32 link#5 UCS 0 0 en0
Ping do PC para o Mac funciona:
ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69) 56(84) bytes of data.
64 bytes from 192.168.1.69: icmp_seq=1 ttl=64 time=6.15 ms
Ping do PC para o laptop não:
ping 192.168.1.77
PING 192.168.1.77 (192.168.1.77) 56(84) bytes of data.
From 192.168.1.83 icmp_seq=9 Destination Host Unreachable
Ping do laptop para o mac funciona:
ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69) 56(84) bytes of data.
64 bytes from 192.168.1.69: icmp_seq=1 ttl=64 time=5.89 ms
O ping do laptop para o computador não:
ping 192.168.1.83
PING 192.168.1.83 (192.168.1.83) 56(84) bytes of data.
From 192.168.1.77 icmp_seq=2 Destination Host Unreachable
Ping do mac para o pc funciona:
ping 192.168.1.83
PING 192.168.1.83 (192.168.1.83): 56 data bytes
64 bytes from 192.168.1.83: icmp_seq=0 ttl=64 time=101.836 ms
O ping do mac para o laptop também funciona:
ping 192.168.1.77
PING 192.168.1.77 (192.168.1.77): 56 data bytes
64 bytes from 192.168.1.77: icmp_seq=0 ttl=64 time=16.749 ms
Tcpdump de 192.168.1.77 durante telnet 192.168.83 22 :
tcpdump -i wlan0 -s 65535 -n host 192.168.1.83
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wlan0, link-type EN10MB (Ethernet), capture size 65535 bytes
18:38:53.194490 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 28
18:38:53.410085 ARP, Reply 192.168.1.83 is-at ac:7b:a1:c5:ea:0e, length 46
18:38:53.410100 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7583261 ecr 0,nop,wscale 7], length 0
18:38:54.193729 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7583511 ecr 0,nop,wscale 7], length 0
18:38:56.197662 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7584012 ecr 0,nop,wscale 7], length 0
18:39:00.205734 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7585014 ecr 0,nop,wscale 7], length 0
18:39:08.213738 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7587016 ecr 0,nop,wscale 7], length 0
18:39:24.245736 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7591024 ecr 0,nop,wscale 7], length 0
18:39:29.253720 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 28
18:39:30.253717 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 28
18:39:31.253715 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 28
18:39:56.309737 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 28
18:39:56.321748 ARP, Reply 192.168.1.83 is-at ac:7b:a1:c5:ea:0e, length 46
18:39:56.321762 IP 192.168.1.77.38208 > 192.168.1.83.22: Flags [S], seq 3257644438, win 29200, options [mss 1460,sackOK,TS val 7599040 ecr 0,nop,wscale 7], length 0
Tcpdump de 192.168.1.83 ao mesmo tempo:
tcpdump -i wlp2s0 -s 65535 -n host 192.168.1.77
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on wlp2s0, link-type EN10MB (Ethernet), capture size 65535 bytes
18:38:53.341294 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 46
18:38:53.341312 ARP, Reply 192.168.1.83 is-at ac:7b:a1:c5:ea:0e, length 28
18:39:56.316562 ARP, Request who-has 192.168.1.83 tell 192.168.1.77, length 46
18:39:56.316597 ARP, Reply 192.168.1.83 is-at ac:7b:a1:c5:ea:0e, length 28
UPDATE
Aparentemente, estou perdendo algumas configurações inteligentes em BT Smart Hub . Tudo funciona com roteador menos sofisticado.
Tags networking ubuntu tcp