Como obter o Plymouth para exibir mensagens de inicialização ao inicializar?

19

Eu gostaria de saber como criar um splash para o Ubuntu Maverick, com mensagens de inicialização sendo exibidas quando eu inicializo, bem como uma barra de progresso e um logotipo giratório.

Ou, se possível, como editar um splash que já tenha um logotipo de giro e uma barra de progresso e adicionar mensagens de inicialização a ele.

Este é o tema que gostaria de editar:

e gostaria de algo assim:

ou este, que é o splash exato que desejo criar:

Eu fui capaz de encontrar este site, ele tem muitas informações úteis, mas estou tendo dificuldade em entender algumas delas. não fiz nenhum script antes!

Crie seu próprio splash tela com rolagem de mensagens de inicialização

Scripts de Plymouth

e este é outro site que pode ajudar com scripts

este é o script da barra de progresso no splash:

    #----------------------------------------- Progress Bar --------------------------------

    progress_box.image = Image("progress_box.png");
    progress_box.sprite = Sprite(progress_box.image);

    progress_box.x = Window.GetX() + Window.GetWidth() / 2 - progress_box.image.GetWidth() / 2;
    progress_box.y = Window.GetY() + Window.GetHeight() * 0.65 - progress_box.image.GetHeight() / 2;
    progress_box.sprite.SetPosition(progress_box.x, progress_box.y, 0);

    progress_bar.original_image = Image("progress_bar.png");
    progress_bar.sprite = Sprite();

    progress_bar.x = Window.GetX() + Window.GetWidth()  / 2 -        progress_bar.original_image.GetWidth() / 2;
    progress_bar.y = Window.GetY() + Window.GetHeight() * 0.65  - progress_box.image.GetHeight() / 2 + (progress_box.image.GetHeight() - progress_bar.original_image.GetHeight()) / 2;
    progress_bar.sprite.SetPosition(progress_bar.x, progress_bar.y, 1);

    fun progress_callback (duration, progress)
      {
        if (progress_bar.image.GetWidth () != Math.Int (progress_bar.original_image.GetWidth () * progress))
          {
# add the * 3 to multiply the speed of the progress bar by 3
            progress_bar.image = progress_bar.original_image.Scale(progress_bar.original_image.GetWidth(progress_bar.original_image) * progress * 3, progress_bar.original_image.GetHeight());
            progress_bar.sprite.SetImage (progress_bar.image);
          }
      }

    Plymouth.SetBootProgressFunction(progress_callback);

OK, então eu fiz muito mais pesquisas e pude aprender um pouco mais sobre o Plymouth.

estes são os sites que achei úteis. Guia de temas de Plymouth  Existem quatro partes para o artigo que você deve ler para obter a essência do que estamos fazendo. (Eu estava comparando seu roteiro com o roteiro para o meu mergulho para entender o que é o que, eu recomendo fazer isso se alguém for seguir meus passos.)   Escrita de Plymouth Ok, este link tem 2 páginas que precisam passar por eles para entender o que fazer. Acontece que eles estavam atrás da mesma coisa que eu, que é direcionar mensagens de inicialização para o splash de Plymouth, onde eu já tenho um logotipo, plano de fundo, barra de progresso.

Então eu tive que editar meu arquivo /lib/lsb/init-functions e fazer com que ele enviasse as mensagens de erro / sucesso, etc para o Plymouth, adicionando este parágrafo

# SEND MESSAGES TO PLYMOUTH
if [ -x /bin/plymouth ] && pidof plymouthd >/dev/null
then
    plymouth_send() {
        [ "" = '-n' ] && { # add a flag '>' for lines that will be extended
            shift
            /bin/plymouth message --text=">$*" || true
            return
        }
        [ "" = '-w' ] && { # add "warning" formatting
            shift
            /bin/plymouth update --status="warning" || true
            /bin/plymouth message --text="$*" || true
            /bin/plymouth update --status="normal" || true
            return
        }
        [ "" = '-f' ] && { # add "failed" formatting
            shift
            /bin/plymouth update --status="failed" || true
            /bin/plymouth message --text="$*" || true
            /bin/plymouth update --status="normal" || true
            return
        }
        /bin/plymouth message --text="$*" || true
    }
else
    plymouth_send() { :; }
fi

# int log_begin_message (char *message)
log_begin_msg () {
    if [ -z "${1:-}" ]; then
        return 1
    fi
    echo -n "[email protected]"
}

Além de adicionar

   # Only do the fancy stuff if we have an appropriate terminal
    # and if /usr is already mounted
    if log_use_fancy_output; then
        RED='$TPUT setaf 1'
        YELLOW='$TPUT setaf 3'
        NORMAL='$TPUT op'
    else
        RED=''
        YELLOW=''
        NORMAL=''
    fi

    if [  -eq 0 ]; then
        echo "."
        plymouth_send "."
    elif [  -eq 255 ]; then
        /bin/echo -e " ${YELLOW}(warning).${NORMAL}"
        plymouth_send -w " (warning)."
    else
        /bin/echo -e " ${RED}failed!${NORMAL}"
        plymouth_send -f " failed!"
    fi
    log_end_msg_post "[email protected]"
    return $retval
}

log_action_msg () {
    echo "[email protected]"
    plymouth_send "[email protected]"
}

log_action_begin_msg () {
    echo -n "[email protected]"
    plymouth_send -n "[email protected]"
}

log_action_cont_msg () {
    echo -n "[email protected]"
    plymouth_send -n "[email protected]"
}

log_action_end_msg () {
    log_action_end_msg_pre "[email protected]"
    if [ -z "${2:-}" ]; then
        end="."
    else
        end=" ()."
    fi

    if [  -eq 0 ]; then
        echo "done${end}"
        plymouth_send "done${end}"
    else
        if log_use_fancy_output; then
            RED='$TPUT setaf 1'
            NORMAL='$TPUT op'
            /bin/echo -e "${RED}failed${end}${NORMAL}"
        else
            echo "failed${end}"
            plymouth_send -f "failed${end}"
        fi
    fi
    log_action_end_msg_post "[email protected]"
}

Até agora não consegui passar as mensagens para Plymouth, mas consegui entender melhor como funciona o script do Plymouth!

Eu não sei o que mais devo fazer para dar certo! esperando que alguém aqui possa me ajudar

Ahh e aqui está a minha versão do script para o Splash Eu estou trabalhando.

# INT2MIL-Ubuntu-10.10-Eng splashy like theme

Window.GetMaxWidth = fun (){
  i = 0;
  width = 0;
  while (Window.GetWidth(i)){
    width = Math.Max(width, Window.GetWidth(i));
    i++;
    }
  return width;
};

Window.GetMaxHeight = fun (){
  i = 0;
  height = 0;
  while (Window.GetHeight(i)){
    height = Math.Max(height, Window.GetHeight(i));
    i++;
    }
  return height;
};

anim.imagecount = 100;
anim.target_width =  0.2* 0.46 * Window.GetWidth();
anim.target_height =  0.2* 0.46 * Window.GetWidth();

fun RotatedImage (index){
    index = Math.Int(index);
    if (!RotatedImageCache[index])
        RotatedImageCache[index] = anim.original_image.Rotate((Math.Pi*2*index)/anim.imagecount).Scale(anim.target_width, anim.target_height);

    return RotatedImageCache[index];
    }


if (Plymouth.GetMode() == "suspend" || Plymouth.GetMode() == "resume") {
  background.original_image = ImageNew("suspend.png");
  Window.SetBackgroundTopColor(1, 0, 0);
  Window.SetBackgroundBottomColor(0, 1, 0);
}
else {
  logo.original_image = ImageNew("logo.png");
  background.original_image = ImageNew("background.png");
  Window.SetBackgroundTopColor(0.234, 0.43, 0.705);
  Window.SetBackgroundBottomColor(0.16, 0.25, 0.44);

  anim.image= ImageNew("animation.png");
  anim.original_image= anim.image.Scale(anim.target_width, anim.target_width);

  anim.sprite = SpriteNew();
  anim.sprite.SetImage(RotatedImage (0));
  anim.sprite.SetX((Window.GetX() + Window.GetWidth() - RotatedImage(0).GetWidth()) / 2);
  anim.sprite.SetY(Window.GetY() + Window.GetHeight() * 0.37);
  anim.angle = 0;
  anim.index = 0;


}
#change reduction size to make logo bigger
ratio =  logo.original_image.GetWidth() / logo.original_image.GetHeight();
reduction = 0.4;
logo.image = logo.original_image.Scale(reduction * Window.GetMaxWidth() , reduction / ratio *  Window.GetMaxWidth());
logo.sprite = SpriteNew();
logo.sprite.SetImage(logo.image);
logo.opacity_angle = 0;
#change logo location
logo.sprite.SetX((Window.GetX() + Window.GetMaxWidth()  - logo.image.GetWidth())  / 2);
logo.sprite.SetY(Window.GetY() + Window.GetHeight() * 0.37);
#background image attributs x,z,y
background.image = background.original_image.Scale(Window.GetMaxWidth() , Window.GetMaxHeight());
background.sprite = SpriteNew();
background.sprite.SetImage(background.image);
background.sprite.SetPosition(Window.GetX(), Window.GetY(), -10);

sprite_prompt = SpriteNew();

fun refresh_callback ()
  {
    if (status == "normal")
      {
#anim.index=speed of rotation
    anim.index += 1;
    anim.index %= anim.imagecount;
    anim.sprite.SetImage(RotatedImage (anim.index));
        #anim.sprite.SetOpacity (1);
    motif.sprite.SetOpacity(motif.opacity);
      }
    else
      {
        anim.sprite.SetOpacity(0);
    motif.sprite.SetOpacity(0);
      }

  }

if (Plymouth.GetMode() != "suspend" && Plymouth.GetMode() != "resume") {
  Plymouth.SetRefreshFunction (refresh_callback);
}

#----------------------------------------- Dialog --------------------------------

status = "normal";

fun dialog_setup()
  {
    local.box;
    local.lock;
    local.entry;
    local.prompt_sprite;

    box.image = ImageNew("box.png");
    lock.image = ImageNew("lock.png");
    entry.image = ImageNew("entry.png");

    box.sprite = SpriteNew();
    box.sprite.SetImage(box.image);
    box.x = Window.GetX() + Window.GetWidth()  / 2 - box.image.GetWidth()/2;
    box.y = Window.GetY() + Window.GetHeight() / 2 - box.image.GetHeight()/2;
    box.z = 10000;
    box.sprite.SetPosition(box.x, box.y, box.z);

    lock.sprite = SpriteNew();
    lock.sprite.SetImage(lock.image);
    lock.x = box.x + box.image.GetWidth()/2 - (lock.image.GetWidth() + entry.image.GetWidth()) / 2;
    lock.y = box.y + box.image.GetHeight()/2 - lock.image.GetHeight()/2;
    lock.z = box.z + 1;
    lock.sprite.SetPosition(lock.x, lock.y, lock.z);

    entry.sprite = SpriteNew();
    entry.sprite.SetImage(entry.image);
    entry.x = lock.x + lock.image.GetWidth();
    entry.y = box.y + box.image.GetHeight()/2 - entry.image.GetHeight()/2;
    entry.z = box.z + 1;
    entry.sprite.SetPosition(entry.x, entry.y, entry.z);

    prompt_sprite = SpriteNew();
    prompt_sprite.SetPosition(box.x, box.y - 20, box.z);

    global.dialog.box = box;
    global.dialog.lock = lock;
    global.dialog.entry = entry;
    global.dialog.bullet_image = ImageNew("bullet.png");
    global.dialog.prompt_sprite = prompt_sprite;
    dialog_opacity (1);
  }

fun dialog_opacity(opacity)
  {
    dialog.box.sprite.SetOpacity(opacity);
    dialog.lock.sprite.SetOpacity(opacity);
    dialog.entry.sprite.SetOpacity(opacity);
    dialog.prompt_sprite.SetOpacity(opacity);
    for (index = 0; dialog.bullet[index]; index++)
      {
        dialog.bullet[index].sprite.SetOpacity(opacity);
      }
  }

fun display_normal_callback ()
  {
    global.status = "normal";
    if (global.dialog)
      dialog_opacity (0);
  }

fun display_password_callback (prompt, bullets)
  {
    global.status = "password";
    if (!global.dialog) 
    dialog_setup();
    else 
    dialog_opacity(1);
    motif.sprite.SetOpacity(0);
    anim.sprite.SetOpacity(0);

    dialog.prompt_sprite.SetImage(Image.Text(prompt, 1.0, 1.0, 1.0));
    for (index = 0; dialog.bullet[index] || index < bullets; index++)
      { 

        if (!dialog.bullet[index])
          {
            dialog.bullet[index].sprite = SpriteNew();
            dialog.bullet[index].sprite.SetImage(dialog.bullet_image);
            dialog.bullet[index].x = dialog.entry.x + index * dialog.bullet_image.GetWidth();
            dialog.bullet[index].y = dialog.entry.y + dialog.entry.image.GetHeight() / 2 - dialog.bullet_image.GetHeight() / 2;
            dialog.bullet[index].z = dialog.entry.z + 1;
            dialog.bullet[index].sprite.SetPosition(dialog.bullet[index].x, dialog.bullet[index].y, dialog.bullet[index].z);
          }
        if (index < bullets)
          dialog.bullet[index].sprite.SetOpacity(1);
        else
          dialog.bullet[index].sprite.SetOpacity(0);
      }
  }

fun display_message_callback (prompt)
  {

prompt = Image.Text(prompt,1.0, 1.0, 1.0);
sprite_prompt.SetImage(prompt);
sprite_prompt.SetPosition(Window.GetX() + (Window.GetWidth() - prompt.GetWidth()) / 2, Window.GetY() + Window.GetHeight() * 0.93, 2);
  }

/* instantiate dialog at startup, to ensure all icons are loaded in memory before initrd is unmounted, in case /usr isn't mounted yet */
dialog_setup(); dialog_opacity(0);
Plymouth.SetDisplayNormalFunction(display_normal_callback);
Plymouth.SetDisplayPasswordFunction(display_password_callback);
Plymouth.SetMessageFunction(display_message_callback);

#----------------------------------------- Progress Bar --------------------------------

progress_box.image = Image("progress_box.png");
progress_box.sprite = Sprite(progress_box.image);

progress_box.x = Window.GetX() + Window.GetWidth() / 2 - progress_box.image.GetWidth() / 2;
progress_box.y = Window.GetY() + Window.GetHeight() * 0.65 - progress_box.image.GetHeight() / 2;
progress_box.sprite.SetPosition(progress_box.x, progress_box.y, 0);

progress_bar.original_image = Image("progress_bar.png");
progress_bar.sprite = Sprite();

progress_bar.x = Window.GetX() + Window.GetWidth()  / 2 -        progress_bar.original_image.GetWidth() / 2;
progress_bar.y = Window.GetY() + Window.GetHeight() * 0.65  - progress_box.image.GetHeight() / 2 + (progress_box.image.GetHeight() - progress_bar.original_image.GetHeight()) / 2;
progress_bar.sprite.SetPosition(progress_bar.x, progress_bar.y, 1);

fun progress_callback (duration, progress)
  {
    if (progress_bar.image.GetWidth () != Math.Int (progress_bar.original_image.GetWidth () * progress))
      {
        progress_bar.image = progress_bar.original_image.Scale(progress_bar.original_image.GetWidth(progress_bar.original_image) * progress * 3, progress_bar.original_image.GetHeight());
        progress_bar.sprite.SetImage (progress_bar.image);
      }
  }

Plymouth.SetBootProgressFunction(progress_callback);

#----------------------------------------- Status Update --------------------------------

NUM_SCROLL_LINES = 5;
LINE_WIDTH = 55;
# width of one character
CHAR_WIDTH = 7;
# height of one character
CHAR_HEIGHT = 10;

msg_color = [0.5,0.5,0.5]; # msg_color is array

fun update_status_callback(sta) {
  if (sta == "failed") msg_color = [1,0,0];
  if (sta == "warning") msg_color = [0.8,0.8,0];
  if (sta == "normal") msg_color = [0.5,0.5,0.5];
}

fun StringLength(string) {
  index = 0;
  str = String(string);
  while(str.CharAt(index)) index++;
  return index;
}

// Initialising text images and their positions
// 20 is the height (including line spacing) of each line
for (i=0; i < NUM_SCROLL_LINES; i++) {
  lines[i]= Image.Text("",0,0,0);
  message_sprite[i] = Sprite();
  message_sprite[i].SetX (Window.GetX() + (screen_width / 2 ) - (LINE_WIDTH * CHAR_WIDTH / 2));
  message_sprite[i].SetY (Window.GetY() + (screen_height / 2) + (logo_height /2) +(logo_height * 1.2)+ (i * CHAR_HEIGHT * 2) );
  message_sprite[i].SetZ (10000);
}

pretext = String("");

fun scroll_message_callback(text) {

 nobreak = 0;
   if (text.CharAt(0) == ">") {    # "no linebreak" flag, like "-n"
       text = text.SubString(1, StringLength(text)); # remove ">" at front
       nobreak = 1;
   }

   if (pretext == "") {

       if (nobreak == 1) pretext = text;

   // Truncate the message if too long
   if (StringLength(text) > LINE_WIDTH) {
     text = text.SubString(0, LINE_WIDTH - 3);
     text += "...";
   }

   // Shift messages one up
   for (i = 0; i < NUM_SCROLL_LINES - 1; i++) {
     lines[i] = lines[i+1];
   }
 else {    # the previous message was flagged to have no linebreak

          // Truncate the message if too long
       if (StringLength(text) > LINE_WIDTH - 5) { # leave min. 5 for pretext
         text = text.SubString(0, LINE_WIDTH - 8);
         text += "...";
       }

          # Truncate the previous message if too long
       if (StringLength(pretext) > (LINE_WIDTH - StringLength(text))) {
         pretext = pretext.SubString(0, LINE_WIDTH - StringLength(text) - 3);
         pretext += "...";
       }

       text = pretext + text;

       if (nobreak == 1) pretext = text;
       else pretext = "";

   }

   // Create the image for the latest message
#  original script had "lines[i]"   
   lines[i] = Image.Text( text, 0.5, 0.5, 0.5);

   // Re-allocate the text images to sprites
   for (i = 0; i < NUM_SCROLL_LINES; i++) {
     message_sprite[i].SetImage(lines[i]);
   }
}

Plymouth.SetUpdateStatusFunction(scroll_message_callback);

# messages get added to updates
Plymouth.SetMessageFunction(scroll_message_callback);

#----------------------------------------- Quit --------------------------------

fun quit_callback ()
{
 anim.sprite.SetOpacity (0);
  if (Plymouth.GetMode() == "shutdown") {
   motif.sprite.SetOpacity(0);
  }
}

Plymouth.SetQuitFunction(quit_callback);
  

OK, então eu forneci quase todas as informações necessárias, se alguém estiver familiarizado com isso, deixe-me saber o que estou perdendo para obter as mensagens de inicialização através de Plymouth. Obrigado

    
por Vitaly 27.06.2011 / 14:20

2 respostas

4

OK, então eu tenho trabalhado neste problema por 4 dias seguidos, e eu quase o acertei completamente. Até agora, consegui que o Plymouth inicializasse com mensagens exibidas, mas infelizmente as mensagens estão truncadas. No momento estou tentando ajustar os scripts, mas não sei onde está o problema no script / lib / lsb / init-functions ou no /lib/plymouth/themes/"theme-name"/mdv.script.

Aqui está o meu trabalho até agora.

primeiro você precisa fazer com que as funções init enviem mensagens para o Plymouth fazendo com que pareça com isso (passe por cada linha para ver as diferenças e copie a linha que corresponde ao envio do Plymouth):

# /lib/lsb/init-functions for Debian -*- shell-script -*-
#
#Copyright (c) 2002-08 Chris Lawrence
#All rights reserved.
#
#Redistribution and use in source and binary forms, with or without
#modification, are permitted provided that the following conditions
#are met:
#1. Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
#2. Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
#3. Neither the name of the author nor the names of other contributors
#   may be used to endorse or promote products derived from this software
#   without specific prior written permission.
#
#THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR
#IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
#LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
#BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
#OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
#EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

start_daemon () {
    local force nice pidfile exec i args
    force=0
    nice=0
    pidfile=/dev/null

    OPTIND=1
    while getopts fn:p: opt ; do
        case "$opt" in
            f)  force=1;;
            n)  nice="$OPTARG";;
            p)  pidfile="$OPTARG";;
        esac
    done

    shift $(($OPTIND - 1))
    if [ "" = '--' ]; then
        shift
    fi

    exec=""; shift

    args="--start --nicelevel $nice --quiet --oknodo"
    if [ $force = 1 ]; then
        /sbin/start-stop-daemon $args --chdir "$PWD" --startas $exec --pidfile /dev/null -- "[email protected]"
    elif [ $pidfile ]; then
        /sbin/start-stop-daemon $args --chdir "$PWD" --exec $exec --oknodo --pidfile "$pidfile" -- "[email protected]"
    else
        /sbin/start-stop-daemon $args --chdir "$PWD" --exec $exec -- "[email protected]"
    fi
}

pidofproc () {
    local pidfile line i pids= status specified pid
    pidfile=
    specified=

    OPTIND=1
    while getopts p: opt ; do
        case "$opt" in
            p)  pidfile="$OPTARG"; specified=1;;
        esac
    done
    shift $(($OPTIND - 1))

    base=${1##*/}
    if [ ! "$specified" ]; then
        pidfile="/var/run/$base.pid"
    fi

    if [ -n "${pidfile:-}" -a -r "$pidfile" ]; then
        read pid < "$pidfile"
        if [ -n "${pid:-}" ]; then
            if $(kill -0 "${pid:-}" 2> /dev/null); then
                echo "$pid"
                return 0
            elif ps "${pid:-}" >/dev/null 2>&1; then
                echo "$pid"
                return 0 # program is running, but not owned by this user
            else
                return 1 # program is dead and /var/run pid file exists
            fi
        fi
    fi
    if [ -x /bin/pidof -a ! "$specified" ]; then
        status="0"
        /bin/pidof -o %PPID -x  || status="$?"
        if [ "$status" = 1 ]; then
            return 3 # program is not running
        fi
        return 0
    fi
    return 4 # Unable to determine status
}

# start-stop-daemon uses the same algorithm as "pidofproc" above.
killproc () {
    local pidfile sig status base i name_param is_term_sig
    pidfile=
    name_param=
    is_term_sig=no

    OPTIND=1
    while getopts p: opt ; do
        case "$opt" in
            p)  pidfile="$OPTARG";;
        esac
    done
    shift $(($OPTIND - 1))

    base=${1##*/}
    if [ ! $pidfile ]; then
        name_param="--name $base --pidfile /var/run/$base.pid"
    else
        name_param="--pidfile $pidfile"
    fi

    sig=$(echo ${2:-} | sed -e 's/^-\(.*\)//')
    sig=$(echo $sig | sed -e 's/^SIG\(.*\)//')
    if [ -z "$sig" -o "$sig" = 15 -o "$sig" = TERM ]; then
        is_term_sig=yes
    fi
    status=0
    if [ ! "$is_term_sig" = yes ]; then
        if [ -n "$sig" ]; then
            /sbin/start-stop-daemon --stop --signal "$sig" --quiet $name_param || status="$?"
        else
            /sbin/start-stop-daemon --stop --quiet $name_param || status="$?"
        fi
    else
        /sbin/start-stop-daemon --stop --quiet --oknodo $name_param || status="$?"
    fi
    if [ "$status" = 1 ]; then
        if [ -n "$sig" ]; then
            return 0
        fi
        return 3 # program is not running
    fi

    if [ "$status" = 0 -a "$is_term_sig" = yes -a "$pidfile" ]; then
        pidofproc -p "$pidfile" "" >/dev/null || rm -f "$pidfile"
    fi
    return 0
}

# Return LSB status
status_of_proc () {
    local pidfile daemon name status

    pidfile=
    OPTIND=1
    while getopts p: opt ; do
        case "$opt" in
            p)  pidfile="$OPTARG";;
        esac
    done
    shift $(($OPTIND - 1))

    if [ -n "$pidfile" ]; then
        pidfile="-p $pidfile"
    fi
    daemon=""
    name=""

    status="0"
    pidofproc $pidfile $daemon >/dev/null || status="$?"
    if [ "$status" = 0 ]; then
        log_success_msg "$name is running"
        return 0
    elif [ "$status" = 4 ]; then
        log_failure_msg "could not access PID file for $name"
        return $status
    else
        log_failure_msg "$name is not running"
        return $status
    fi
}

log_use_fancy_output () {
    TPUT=/usr/bin/tput
    EXPR=/usr/bin/expr
    if [ -t 1 ] && [ "x${TERM:-}" != "x" ] && [ "x${TERM:-}" != "xdumb" ] && [ -x $TPUT ] && [ -x $EXPR ] && $TPUT hpa 60 >/dev/null 2>&1 && $TPUT setaf 1 >/dev/null 2>&1; then
        [ -z $FANCYTTY ] && FANCYTTY=1 || true
    else
        FANCYTTY=0
    fi
    case "$FANCYTTY" in
        1|Y|yes|true)   true;;
        *)              false;;
    esac
}

log_success_msg () {
    if [ -n "${1:-}" ]; then
        log_begin_msg [email protected]
    fi
    log_end_msg 0
}

log_failure_msg () {
    if [ -n "${1:-}" ]; then
        log_begin_msg [email protected] "..."
    fi
    log_end_msg 1 || true
}

log_warning_msg () {
    if [ -n "${1:-}" ]; then
        log_begin_msg [email protected] "..."
    fi
    log_end_msg 255 || true
}

#
# NON-LSB HELPER FUNCTIONS
#
# int get_lsb_header_val (char *scriptpathname, char *key)
get_lsb_header_val () {
        if [ ! -f "" ] || [ -z "${2:-}" ]; then
                return 1
        fi
        LSB_S="### BEGIN INIT INFO"
        LSB_E="### END INIT INFO"
        sed -n "/$LSB_S/,/$LSB_E/ s/# : \(.*\)//p" 
}

# SEND MESSAGES TO PLYMOUTH
if [ -x /bin/plymouth ] && pidof plymouthd >/dev/null
then
    plymouth_send() {
        [ "" = '-n' ] && { # add a flag '>' for lines that will be extended
            shift
            /bin/plymouth message --text=">$*" || true
            return
        }
        [ "" = '-w' ] && { # add "warning" formatting
            shift
            /bin/plymouth update --status="warning" || true
            /bin/plymouth message --text="$*" || true
            /bin/plymouth update --status="normal" || true
            return
        }
        [ "" = '-f' ] && { # add "failed" formatting
            shift
            /bin/plymouth update --status="failed" || true
            /bin/plymouth message --text="$*" || true
            /bin/plymouth update --status="normal" || true
            return
        }
        /bin/plymouth message --text="$*" || true
    }
else
    plymouth_send() { :; }
fi

# int log_begin_message (char *message)
log_begin_msg () {
    if [ -z "${1:-}" ]; then
        return 1
    fi
    echo -n "[email protected]"
    plymouth_send -n "[email protected]"
}

# Sample usage:
# log_daemon_msg "Starting GNOME Login Manager" "gdm"
#
# On Debian, would output "Starting GNOME Login Manager: gdm"
# On Ubuntu, would output " * Starting GNOME Login Manager..."
#
# If the second argument is omitted, logging suitable for use with
# log_progress_msg() is used:
#
# log_daemon_msg "Starting remote filesystem services"
#
# On Debian, would output "Starting remote filesystem services:"
# On Ubuntu, would output " * Starting remote filesystem services..."

log_daemon_msg () {
    if [ -z "${1:-}" ]; then
        return 1
    fi
    log_daemon_msg_pre "[email protected]"

    if [ -z "${2:-}" ]; then
        echo -n ":"
        plymouth_send -n ":"
        return
    fi

    echo -n ": "
    plymouth_send -n ": "
    log_daemon_msg_post "[email protected]"
}

# #319739
#
# Per policy docs:
#
#     log_daemon_msg "Starting remote file system services"
#     log_progress_msg "nfsd"; start-stop-daemon --start --quiet nfsd
#     log_progress_msg "mountd"; start-stop-daemon --start --quiet mountd
#     log_progress_msg "ugidd"; start-stop-daemon --start --quiet ugidd
#     log_end_msg 0
#
# You could also do something fancy with log_end_msg here based on the
# return values of start-stop-daemon; this is left as an exercise for
# the reader...
#
# On Ubuntu, one would expect log_progress_msg to be a no-op.
log_progress_msg () {
    if [ -z "${1:-}" ]; then
        return 1
    fi
    echo -n " [email protected]"
    plymouth_send -n " [email protected]"
}


# int log_end_message (int exitstatus)
log_end_msg () {
    # If no arguments were passed, return
    if [ -z "${1:-}" ]; then
        return 1
    fi

    retval=

    log_end_msg_pre "[email protected]"

    # Only do the fancy stuff if we have an appropriate terminal
    # and if /usr is already mounted
    if log_use_fancy_output; then
        RED='$TPUT setaf 1'
        YELLOW='$TPUT setaf 3'
        NORMAL='$TPUT op'
    else
        RED=''
        YELLOW=''
        NORMAL=''
    fi

    if [  -eq 0 ]; then
        echo "."
        plymouth_send "."
    elif [  -eq 255 ]; then
        /bin/echo -e " ${YELLOW}(warning).${NORMAL}"
        plymouth_send -w "warning"
    else
        /bin/echo -e " ${RED}failed!${NORMAL}"
        plymouth_send -f "failed"
    fi
    log_end_msg_post "[email protected]"
    return $retval
}

log_action_msg () {
    echo "[email protected]"
    plymouth_send "[email protected]"
}

log_action_begin_msg () {
    echo -n "[email protected]"
    plymouth_send -n "[email protected]"
}

log_action_cont_msg () {
    echo -n "[email protected]"
    plymouth_send -n "[email protected]"
}

log_action_end_msg () {
    log_action_end_msg_pre "[email protected]"
    if [ -z "${2:-}" ]; then
        end="."
    else
        end=" ()."
    fi

    if [  -eq 0 ]; then
        echo "done${end}"
        plymouth_send "done${end}"
    else
        if log_use_fancy_output; then
            RED='$TPUT setaf 1'
            NORMAL='$TPUT op'
            /bin/echo -e "${RED}failed${end}${NORMAL}"
            plymouth_send -f "failed${end}"
        else
            echo "failed${end}"
            plymouth_send -f "failed${end}"
        fi
    fi
    log_action_end_msg_post "[email protected]"
}

# Hooks for /etc/lsb-base-logging.sh
log_daemon_msg_pre () { :; }
log_daemon_msg_post () { :; }
log_end_msg_pre () { :; }
log_end_msg_post () { :; }
log_action_end_msg_pre () { :; }
log_action_end_msg_post () { :; }

FANCYTTY=
[ -e /etc/lsb-base-logging.sh ] && . /etc/lsb-base-logging.sh || true

Agora, depois de adicionar as funções init, você precisa editar o tema do Plymouth mdv.script

Esta é minha última versão atualizada do script:

# INT2MIL-Ubuntu-10.10-Eng splashy like theme

Window.GetMaxWidth = fun (){
  i = 0;
  width = 0;
  while (Window.GetWidth(i)){
    width = Math.Max(width, Window.GetWidth(i));
    i++;
    }
  return width;
};

Window.GetMaxHeight = fun (){
  i = 0;
  height = 0;
  while (Window.GetHeight(i)){
    height = Math.Max(height, Window.GetHeight(i));
    i++;
    }
  return height;
};
#change animcount to increase/decrease speed of spinning arrows
anim.imagecount = 100;
anim.target_width =  0.2* 0.46 * Window.GetWidth();
anim.target_height =  0.2* 0.46 * Window.GetWidth();

fun RotatedImage (index){
    index = Math.Int(index);
    if (!RotatedImageCache[index])
        RotatedImageCache[index] = anim.original_image.Rotate((Math.Pi*2*index)/anim.imagecount).Scale(anim.target_width, anim.target_height);

    return RotatedImageCache[index];
    }


if (Plymouth.GetMode() == "suspend" || Plymouth.GetMode() == "resume") {
  background.original_image = ImageNew("suspend.png");
  Window.SetBackgroundTopColor(1, 0, 0);
  Window.SetBackgroundBottomColor(0, 1, 0);
}
else {
  logo.original_image = ImageNew("logo.png");
  background.original_image = ImageNew("background.png");
  Window.SetBackgroundTopColor(0.234, 0.43, 0.705);
  Window.SetBackgroundBottomColor(0.16, 0.25, 0.44);

  anim.image= ImageNew("animation.png");
  anim.original_image= anim.image.Scale(anim.target_width, anim.target_width);

  anim.sprite = SpriteNew();
  anim.sprite.SetImage(RotatedImage (0));
  anim.sprite.SetX((Window.GetX() + Window.GetWidth() - RotatedImage(0).GetWidth()) / 2);
  anim.sprite.SetY(Window.GetY() + Window.GetHeight() * 0.37);
  anim.angle = 0;
  anim.index = 0;


}
#change reduction size to make logo bigger
ratio =  logo.original_image.GetWidth() / logo.original_image.GetHeight();
reduction = 0.4;
logo.image = logo.original_image.Scale(reduction * Window.GetMaxWidth() , reduction / ratio *  Window.GetMaxWidth());
logo.sprite = SpriteNew();
logo.sprite.SetImage(logo.image);
logo.opacity_angle = 0;
#change logo location
logo.sprite.SetX((Window.GetX() + Window.GetMaxWidth()  - logo.image.GetWidth())  / 2);
logo.sprite.SetY(Window.GetY() + Window.GetHeight() * 0.37);
#background image attributs x,z,y
background.image = background.original_image.Scale(Window.GetMaxWidth() , Window.GetMaxHeight());
background.sprite = SpriteNew();
background.sprite.SetImage(background.image);
background.sprite.SetPosition(Window.GetX(), Window.GetY(), -100);

sprite_prompt = SpriteNew();

fun refresh_callback ()
  {
    if (status == "normal")
      {
#anim.index=speed of rotation
    anim.index += 1;
    anim.index %= anim.imagecount;
    anim.sprite.SetImage(RotatedImage (anim.index));
        #anim.sprite.SetOpacity (1);
    motif.sprite.SetOpacity(motif.opacity);
      }
    else
      {
        anim.sprite.SetOpacity(1);
    motif.sprite.SetOpacity(1);
      }

  }

if (Plymouth.GetMode() != "suspend" && Plymouth.GetMode() != "resume") {
  Plymouth.SetRefreshFunction (refresh_callback);
}

#----------------------------------------- Dialog --------------------------------

status = "normal";

fun dialog_setup()
  {
    local.box;
    local.lock;
    local.entry;
    local.prompt_sprite;

    box.image = ImageNew("box.png");
    lock.image = ImageNew("lock.png");
    entry.image = ImageNew("entry.png");

    box.sprite = SpriteNew();
    box.sprite.SetImage(box.image);
    box.x = Window.GetX() + Window.GetWidth()  / 2 - box.image.GetWidth()/2;
    box.y = Window.GetY() + Window.GetHeight() / 2 - box.image.GetHeight()/2;
    box.z = 10000;
    box.sprite.SetPosition(box.x, box.y, box.z);

    lock.sprite = SpriteNew();
    lock.sprite.SetImage(lock.image);
    lock.x = box.x + box.image.GetWidth()/2 - (lock.image.GetWidth() + entry.image.GetWidth()) / 2;
    lock.y = box.y + box.image.GetHeight()/2 - lock.image.GetHeight()/2;
    lock.z = box.z + 1;
    lock.sprite.SetPosition(lock.x, lock.y, lock.z);

    entry.sprite = SpriteNew();
    entry.sprite.SetImage(entry.image);
    entry.x = lock.x + lock.image.GetWidth();
    entry.y = box.y + box.image.GetHeight()/2 - entry.image.GetHeight()/2;
    entry.z = box.z + 1;
    entry.sprite.SetPosition(entry.x, entry.y, entry.z);

    prompt_sprite = SpriteNew();
    prompt_sprite.SetPosition(box.x, box.y - 20, box.z);

    global.dialog.box = box;
    global.dialog.lock = lock;
    global.dialog.entry = entry;
    global.dialog.bullet_image = ImageNew("bullet.png");
    global.dialog.prompt_sprite = prompt_sprite;
    dialog_opacity (1);
  }

fun dialog_opacity(opacity)
  {
    dialog.box.sprite.SetOpacity(opacity);
    dialog.lock.sprite.SetOpacity(opacity);
    dialog.entry.sprite.SetOpacity(opacity);
    dialog.prompt_sprite.SetOpacity(opacity);
    for (index = 0; dialog.bullet[index]; index++)
      {
        dialog.bullet[index].sprite.SetOpacity(opacity);
      }
  }

fun display_normal_callback ()
  {
    global.status = "normal";
    if (global.dialog)
      dialog_opacity (0);
  }

fun display_password_callback (prompt, bullets)
  {
    global.status = "password";
    if (!global.dialog) 
    dialog_setup();
    else 
    dialog_opacity(1);
    motif.sprite.SetOpacity(1);
    anim.sprite.SetOpacity(1);

    dialog.prompt_sprite.SetImage(Image.Text(prompt, 1.0, 1.0, 1.0));
    for (index = 0; dialog.bullet[index] || index < bullets; index++)
      { 

        if (!dialog.bullet[index])
          {
            dialog.bullet[index].sprite = SpriteNew();
            dialog.bullet[index].sprite.SetImage(dialog.bullet_image);
            dialog.bullet[index].x = dialog.entry.x + index * dialog.bullet_image.GetWidth();
            dialog.bullet[index].y = dialog.entry.y + dialog.entry.image.GetHeight() / 2 - dialog.bullet_image.GetHeight() / 2;
            dialog.bullet[index].z = dialog.entry.z + 1;
            dialog.bullet[index].sprite.SetPosition(dialog.bullet[index].x, dialog.bullet[index].y, dialog.bullet[index].z);
          }
        if (index < bullets)
          dialog.bullet[index].sprite.SetOpacity(1);
        else
          dialog.bullet[index].sprite.SetOpacity(0);
      }
  }

fun display_message_callback (prompt)
  {

prompt = Image.Text(prompt,1.0, 1.0, 1.0);
sprite_prompt.SetImage(prompt);
sprite_prompt.SetPosition(Window.GetX() + (Window.GetWidth() - prompt.GetWidth()) / 2, Window.GetY() + Window.GetHeight() * 0.93, 2);
  }

/* instantiate dialog at startup, to ensure all icons are loaded in memory before initrd is unmounted, in case /usr isn't mounted yet */
dialog_setup(); dialog_opacity(0);
Plymouth.SetDisplayNormalFunction(display_normal_callback);
Plymouth.SetDisplayPasswordFunction(display_password_callback);
Plymouth.SetMessageFunction(display_message_callback);

#----------------------------------------- Progress Bar --------------------------------

progress_box.image = Image("progress_box.png");
progress_box.sprite = Sprite(progress_box.image);

progress_box.x = Window.GetX() + Window.GetWidth() / 2 - progress_box.image.GetWidth() / 2;
progress_box.y = Window.GetY() + Window.GetHeight() * 0.65 - progress_box.image.GetHeight() / 2;
progress_box.sprite.SetPosition(progress_box.x, progress_box.y, 0);

progress_bar.original_image = Image("progress_bar.png");
progress_bar.sprite = Sprite();

progress_bar.x = Window.GetX() + Window.GetWidth()  / 2 -        progress_bar.original_image.GetWidth() / 2;
progress_bar.y = Window.GetY() + Window.GetHeight() * 0.65  - progress_box.image.GetHeight() / 2 + (progress_box.image.GetHeight() - progress_bar.original_image.GetHeight()) / 2;
progress_bar.sprite.SetPosition(progress_bar.x, progress_bar.y, 1);

fun progress_callback (duration, progress)
  {
    if (progress_bar.image.GetWidth () != Math.Int (progress_bar.original_image.GetWidth () * progress))
      {
# * 3 = multiply progress by 3
        progress_bar.image = progress_bar.original_image.Scale(progress_bar.original_image.GetWidth(progress_bar.original_image) * progress * 3, progress_bar.original_image.GetHeight());
        progress_bar.sprite.SetImage (progress_bar.image);
      }
  }

Plymouth.SetBootProgressFunction(progress_callback);

#----------------------------------------- Status Update --------------------------------

NUM_SCROLL_LINES=10;
LINE_WIDTH=55;

# width of one character doesnt work------------
CHAR_WIDTH = 7;
# height of one character
CHAR_HEIGHT = 10; 
#------------------------

msg_color = [1,1,1]; # msg_color is array

#status callback function

fun update_status_callback(sta) {
  if (sta == "failed") msg_color = [1,0,0];
  if (sta == "warning") msg_color = [0.8,0.8,0];
  if (sta == "normal") msg_color = [0.5,0.5,0.5];
}

screen_width = Window.GetWidth();
screen_height = Window.GetHeight();

#Initialising text images and their positions
# 20 is the height (including line spacing) of each line

for (i=0; i < NUM_SCROLL_LINES; i++) {
  lines[i]= Image.Text("", msg_color[0], msg_color[1], msg_color[2]);
  message_sprite[i] = Sprite();
  message_sprite[i].SetPosition(screen_width * 0.025, (screen_height * 0.6) + (i * 20), 10000);
}

fun StringLength(string) {

  index = 0;
  str = String(string);
  while(str.CharAt(index)) index++;
  return index;
}

pretext = String("");

#scroll message function

fun scroll_message_callback(text) {

 ##nobreak function 

  nobreak = 0;
   if (text.CharAt(0) == ">") {    # "no linebreak" flag, like "-n"
       text = text.SubString(1, StringLength(text)); # remove ">" at front
       nobreak = 1;
   }

   if ((pretext == "") || (StringLength(text) > 15))  {
   if (text == ".") return;    # ignore messages of only a single dot

       if (nobreak == 1) pretext = text;



#Truncate the message if too long


   if (StringLength(text) > LINE_WIDTH) {
     text = text.SubString(0, LINE_WIDTH - 0);
     text += "...";
   }




#Shift message one up

   for (i = 0; i < NUM_SCROLL_LINES - 1; i++) {
     lines[i] = lines[i+1];
   }


}
   else {    # the previous message was flagged to have no linebreak

          // Truncate the message if too long
       if (StringLength(text) > LINE_WIDTH - 5) { # leave min. 5 for pretext
         text = text.SubString(0, LINE_WIDTH - 8);
         text += "...";
       }

          # Truncate the previous message if too long
       if (StringLength(pretext) > (LINE_WIDTH - StringLength(text))) {
         pretext = pretext.SubString(0, LINE_WIDTH - StringLength(text) - 3);
         pretext += "...";
       }

       text = pretext + text;

       if (nobreak == 1) pretext = text;
       else pretext = ">";

   }


#Create the image for the latest message

     lines[i] = Image.Text(text, msg_color[0], msg_color[1], msg_color[2]);

#Re-positioning the text images

  for (i = 0; i < NUM_SCROLL_LINES; i++) {
     message_sprite[i].SetImage(lines[i]);
   }
}

 Plymouth.SetUpdateStatusFunction(update_status_callback);

 Plymouth.SetUpdateStatusFunction(scroll_message_callback);


#----------------------------------------- Quit --------------------------------

fun quit_callback ()
{
 anim.sprite.SetOpacity (1);
  if (Plymouth.GetMode() == "shutdown") {
   motif.sprite.SetOpacity(1);
  }
}

Plymouth.SetQuitFunction(quit_callback);

Basicamente, o script pode ser aplicado a qualquer tema. Tudo o que você precisa fazer é fornecer os nomes de arquivo das imagens na pasta. E mudando algumas outras linhas para ajustar as imagens na tela. Ou o que você faz é copiar a parte necessária como se dissesse que você quer a parte do progresso, então tudo que você precisa fazer é copiar tudo de

----------------------------------------- Barra de progresso ---- ----------------------------

até

----------------------------------------- Atualização de status ---- ----------------------------

Depois de concluir a edição do mdv.script, certifique-se de sudo update-initramfs -u e na sua próxima inicialização você verá seu novo splash.

Não deixe de conferir os links fornecidos na minha pergunta, eles são muito informativos e farão com que você entenda o script de plymouth em pouco tempo.

Agora, se você fez tudo o que eu disse aqui, você deve exibir as mensagens de rolagem. Agora, sobre a parte de truncamento, atualmente estou trabalhando nisso, mas é meio chato ter que reinicializar minha máquina toda vez que faço algumas alterações. É possível testar um processo de inicialização enquanto estou logado como

sudo plymouthd ; sudo plymouth --show-splash ; sudo plymouth update --status="Hello" ; sleep 2 ; sudo plymouth update --status="This is a test. This is a test. This is a test. This is a test. This is a test. This is a test. " ; sleep 10 ; sudo killall plymouthd

Outra maneira de testar o Plymouth é copiar o comando acima em um arquivo de texto e adicionar sudo plymouth update --status="your message" para que mais mensagens rolem. Em seguida, torne o arquivo executável e execute no terminal.

Espero que isso ajude qualquer outra pessoa que queira editar seu splash em Plymouth. Boa sorte!

    
por Vitaly 01.07.2011 / 11:36
0

Eu sei que é um segmento antigo, mas eu acho que sei a resposta sobre o truncamento de texto ou não. No meu themename.script (não o arquivo themename.plymouth) eu uso duas variáveis.

1. NUM_SCROLL_LINES
2. LINE_WIDTH

com estas variáveis ​​eu posso definir quantas linhas serão exibidas e quanto tempo são as linhas que serão exibidas. O script também tem uma função que trunca as linhas se elas forem longas para serem exibidas.

Espero que isso seja útil para alguém.

Meu problema no opensuse é 42.1 Leap. O plymouth não mostra mensagens de inicialização, como se elas fossem escritas em /var/log/boot.log. Mostra as chamadas do systemd para serviços.

Eu também editei / lib / lsb / init-functions dessa maneira

if [ -x /usr/bin/plymouth ]; then
  /usr/bin/plymouth update --status="[email protected]"
fi

ou que

[ -x /usr/bin/plymouth ] && /usr/bin/plymouth update --status="[email protected]"

Nada funcionou para mim. Alguém tem uma ideia?

Aqui está o themename.script que eu uso

NUM_SCROLL_LINES=52;
LINE_WIDTH=120;

wallpaper_image = Image("background.png");
screen_width = Window.GetWidth();
screen_height = Window.GetHeight();
resized_wallpaper_image = wallpaper_image.Scale(screen_width,screen_height);
wallpaper_sprite = Sprite(resized_wallpaper_image);
wallpaper_sprite.SetZ(-100);

// Initialising text images and their positions
// 20 is the height (including line spacing) of each line
for (i=0; i < NUM_SCROLL_LINES; i++) {
  lines[i]= Image.Text("", 0, 0, 0);
  message_sprite[i] = Sprite();
#  here you can set the hights and width of textdisplay. 0.005 uses almost the whole screen.
#  message_sprite[i].SetPosition(screen_width * 0.2, (screen_height * 0.6) + (i * 20), 10000);
  message_sprite[i].SetPosition(screen_width * 0.005, (screen_height * 0.005) + (i * 20), 10000);
}

// From ubuntu-logo
fun StringLength(string) {
  index = 0;
  str = String(string);
  while(str.CharAt(index)) index++;
    return index;
}

fun scroll_message_callback(text) {
  // Truncate the message if too long
  if (StringLength(text) > LINE_WIDTH) {
    text = text.SubString(0, LINE_WIDTH - 3);
    text += "...";
  }

  // Shift message one up
  for (i = 0; i < NUM_SCROLL_LINES - 1; i++) {
    lines[i] = lines[i+1];
  }

  // Create the image for the latest message
  # z.B. turquoise coloured text / (text, 0.28, 0.82, 0.80); // 1.0 = 100% 0.28 = 28% usw.
  lines[i] = Image.Text(text, 0.28, 0.82, 0.80);

  // Re-positioning the text images
  for (i = 0; i < NUM_SCROLL_LINES; i++) {
    message_sprite[i].SetImage(lines[i]);
  }

}

Plymouth.SetUpdateStatusFunction(scroll_message_callback);
    
por user572252 25.07.2016 / 14:59

Tags