Configurando VLANS entre um Dell PowerConnect 2824 e 2716

Question

Objetivos:

- Have two Dell switches trunked together with 1 cat5 cable.
- Have VLANs of the same number/name passing traffic from switch to switch.
- Not allowing any traffic from one VLAN to pass to a different VLAN.

Comutadores usados:

- Dell PowerConnect 2824 (24 port gigabit, level 2) [CORE SWITCH]
- Dell PowerConnect 2716 (16 port gigabit, level 2)

VLANs:

- VLAN1 (default by dell)
  Dell2824 Ports 1, Dell2716 Ports 1

- VLAN110 (workstations)
  Dell2824 Ports 7-16, Dell2716 Ports 2-14

- VLAN111 (printers)
  Dell2824 Ports 2-6

- VLAN112 (servers)
  Dell2824 Ports 18-22

Abaixo estão alguns instantâneos da minha configuração atual e quero saber se preciso alterar alguma coisa para que funcione corretamente. Tal como está, não funcionará como pretendido.

... Depois de passar por um monte de trabalho tentando preparar imagens para mostrar a você tudo que eu percebi ao tentar publicá-las eu preciso de 10 rep para postar imagens ...: / Sinto muito por uma representação não tão gráfica de minhas configurações abaixo ... Eu criei um álbum aqui ... configurações de vlan

    

Answer 1

Para configurar VLANs usando dois switches Dell e uma única parte de tronco, você precisa fazer o seguinte usando o Web GUI incorporado ao switch ... (Para referência, por favor, use este link )

Nota: para este exemplo, usarei um Dell 2824 e um Dell 2716.

PASSO 1 - (Configurar as VLANs)

You first need to set up the VLANs themselves. In the web GUI for the first switch (2824) Browse to Home->Switch->VLAN->VLAN Members. Create a new VLAN by clicking the "Add" button (top right). Set your VLAN ID (Ex: "110") then set the VLAN Name (Ex: "workstations"). Leave "Authentication Not Required" set to "Disabled" which is the default. Click "Apply Changes". Go ahead and create a second VLAN the same way. Ex: ID "111", Name "printers".

ETAPA 2 - (Defina quais portas serão usadas nas VLANs)

On the (2824) browse to Home->Switch->VLAN->VLAN Members. Choose VLAN ID "110" the let it load real quick. Now you will see the ports associated with VLAN 110 below. The line that says "static" is where you want to be working at. Click on each port box (on the static line) and make the box say "U" for each port you want to be involved in the VLAN. In this example ports 7-17 are used. Next I changed the port 23 and 24 boxes to a "T" for tagged. These are use for my TRUNK ports only. After you set the settings appropriately click "Apply Changes". Be sure to set up the other vlan to (VLAN 111).

ETAPA 3 - (Defina as configurações da porta para refletir cada associação de VLAN)

So now we have to go into the port settings and set up each port to be associated with a certain VLAN. Browse to Home->Switch->VLAN->Port Settings. Click "Show All" (top right) to see a list of all the ports so you can change them at the same time. Set the PVID on each port to the VLAN ID it belongs to. For example mine would be all "1" (even on page 2) with the exception of ports "g2" through "g6" would be set to "111" and ports "g7" through "g17" which would be set to "110". In my images the PVIDs are all "1" but that was changed after the image was taken. Please make the changes on your system to reflect the example above in text.

PASSO 4 - (Replicar configurações para outro switch)

In this example I just want to be able to carry the workstations vlan (VLAN ID 110) over to the Dell 2716 and use all ports on that switch I can for vlan 110. So on the Dell 2716 Web GUI open it up and browse to Home->VLAN Membership. Create a VLAN here with VLAN ID "110". In my example I usually leave PORT 1 on all switches alone and ALWAYS keep them on VLAN 1 for management purposes ONLY.

Don't forget the PORT settings for the 2716 switch!!! Ports "2" through "14" should be in VLAN "110". This switch makes it a pain.. You have to do them one at a time!!! :/

PASSO 5 - (Conectividade VLAN de teste)

Try plugging one machine into port 7 on switch 2824 and another machine into port 2 on the 2716 switch. They should be able to ping each other (check machine firewall if not). Now try plugging the first machine into port 2 on the 2824 switch. Now they should NOT be able to ping each other.

    

Answer 2

Ao aplicar essas configurações de VLAN, certifique-se de gravar a configuração em execução na configuração de inicialização para que as configurações sejam mantidas por meio de uma reinicialização.

No powerconnect 28xx / 27xx / 35xx (unidades em que testei isso), faça o seguinte na GUI:

Sistema > Gerenciamento de arquivos > Copiar arquivos > Aplicar alterações

Isso copiará a configuração atual para a configuração de inicialização.