Soft raid 1 lento (falha no disco?)

1

Estou executando um servidor com o Software Raid 1 e ele é usado exclusivamente para fins de backup usando o Idera / R1Soft. Nos últimos dias, os backups foram gerados de forma extremamente lenta, por isso estou começando a me perguntar se há problemas de disco. No entanto, não tenho certeza se esse é o caso, então espero que alguém possa me ajudar a diagnosticar o problema.

Abaixo está um monte de informações dos discos, deixe-me saber se alguma coisa é necessária. Essas unidades parecem saudáveis ou o que parece ser o problema? O software de backup salva na partição / home /, então é provável que esse seja o problema.

Se um dos discos estiver com defeito, preciso enviar ao provedor do servidor uma prova disso, o que devo enviar?

Muito obrigado!

mdadm.conf

DEVICES /dev/[hs]d*
ARRAY /dev/md/0  metadata=1.0 UUID=77f79cbb:769b739a:61e3078d:baa387d3 name=rescue:0
ARRAY /dev/md/1  metadata=1.0 UUID=07982091:3873fa5c:5308f9a4:7be6239d name=rescue:1
ARRAY /dev/md/2  metadata=1.0 UUID=9faef154:1550a09e:b8a9f3a5:792ec8f7 name=rescue:2
ARRAY /dev/md/3  metadata=1.0 UUID=21d130c8:d3d06125:80436cbf:f30ca896 name=rescue:3

/ proc / mdstat

Personalities : [raid1] 
md1 : active raid1 sda2[0] sdb2[1]
      524224 blocks super 1.0 [2/2] [UU]

md0 : active raid1 sda1[0] sdb1[1]
      8388596 blocks super 1.0 [2/2] [UU]

md3 : active raid1 sda4[0] sdb4[1]
      1847609660 blocks super 1.0 [2/2] [UU]
      [>....................]  check =  1.5% (28544512/1847609660) finish=30485.4min speed=994K/sec
      bitmap: 6/14 pages [24KB], 65536KB chunk

md2 : active raid1 sda3[0] sdb3[1]
      1073741688 blocks super 1.0 [2/2] [UU]
        resync=DELAYED

unused devices: <none>

lsblk

NAME    MAJ:MIN RM  SIZE RO TYPE  MOUNTPOINT
sda       8:0    0  2.7T  0 disk  
├─sda1    8:1    0    8G  0 part  
│ └─md0   9:0    0    8G  0 raid1 [SWAP]
├─sda2    8:2    0  512M  0 part  
│ └─md1   9:1    0  512M  0 raid1 /boot
├─sda3    8:3    0    1T  0 part  
│ └─md2   9:2    0 1024G  0 raid1 /
├─sda4    8:4    0  1.7T  0 part  
│ └─md3   9:3    0  1.7T  0 raid1 /home
└─sda5    8:5    0    1M  0 part  
sdb       8:16   0  2.7T  0 disk  
├─sdb1    8:17   0    8G  0 part  
│ └─md0   9:0    0    8G  0 raid1 [SWAP]
├─sdb2    8:18   0  512M  0 part  
│ └─md1   9:1    0  512M  0 raid1 /boot
├─sdb3    8:19   0    1T  0 part  
│ └─md2   9:2    0 1024G  0 raid1 /
├─sdb4    8:20   0  1.7T  0 part  
│ └─md3   9:3    0  1.7T  0 raid1 /home
└─sdb5    8:21   0    1M  0 part 

smartctl -a / dev / sda4

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-1CH166
Serial Number:    Z1F0S2S6
LU WWN Device Id: 5 000c50 04dc90878
Firmware Version: CC43
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun May  3 11:44:10 2015 CEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (  575) seconds.
Offline data collection
capabilities:            (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    ( 324) minutes.
Conveyance self-test routine
recommended polling time:    (   2) minutes.
SCT capabilities:          (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       162055184
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       9
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       24
  7 Seek_Error_Rate         0x000f   077   050   030    Pre-fail  Always       -       43512399126
  9 Power_On_Hours          0x0032   074   074   000    Old_age   Always       -       23095
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       9
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   075   075   000    Old_age   Always       -       25
190 Airflow_Temperature_Cel 0x0022   068   062   045    Old_age   Always       -       32 (Min/Max 25/33)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       6
193 Load_Cycle_Count        0x0032   097   097   000    Old_age   Always       -       7646
194 Temperature_Celsius     0x0022   032   040   000    Old_age   Always       -       32 (0 21 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       23095h+14m+28.598s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       130844533886
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       310965085514

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     20851         -
# 2  Extended offline    Completed without error       00%     20833         -
# 3  Extended offline    Completed without error       00%     20827         -
# 4  Extended offline    Completed without error       00%     20822         -
# 5  Extended offline    Completed without error       00%         5         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl -a / dev / sdb4

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA300
Serial Number:    94KK14MGS
LU WWN Device Id: 5 000039 ff4e3eda1
Firmware Version: MX6OABB0
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun May  3 11:45:48 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                    was suspended by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (22365) seconds.
Offline data collection
capabilities:            (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    ( 373) minutes.
SCT capabilities:          (0x003d) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   140   140   054    Pre-fail  Offline      -       69
  3 Spin_Up_Time            0x0007   100   100   024    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       2
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail  Offline      -       33
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       2268
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       4
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       4
194 Temperature_Celsius     0x0002   181   181   000    Old_age   Always       -       33 (Min/Max 25/36)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%        24         -
# 2  Extended offline    Completed without error       00%         5         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
    
por Jacob 03.05.2015 / 11:49

1 resposta

1

Sua matriz md3 está ressincronizando, por isso é lenta. Com base na sua saída smartctl, o sda falhará em breve.

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       162055184
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       9
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       24
  7 Seek_Error_Rate         0x000f   077   050   030    Pre-fail  Always       -       43512399126
  9 Power_On_Hours          0x0032   074   074   000    Old_age   Always       -       23095
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -   

Ver todos os tipos de pré-falha Se eu fosse você, mudaria esse disco o mais rápido possível.

    
por 03.05.2015 / 22:39